Under-table crosscut saw with pneumatic saw blade feed

Stromab TR 500

Condition: excellent (used), functionality: fully functional, maximum cutting width: 360 mm maximum cutting height: 135 mm motor power: 8.5 kW maximum blade diameter: 500 mm minimum blade diameter: 490 mm Hnodpsz E H Hcsfx Aiteu blade speed: 2800 rpm CE marking 400 V safety clutch feeder length: 660 cm receiver length: 530 cm machine length: 90 cm year of manufacture: 2011

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Hedpfexwaz Hex Aitenu

Condition: new, Year of construction: 2026, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Working table tilted 8° Cutting unit technical features: Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Hodpfxjhw Ng Io Aitsnu Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device Program creating lists on PC in XML

Condition: used, Year of construction: 2007, machine/vehicle number: 1377, SECOND HAND PNEUMATIC END CUTTING SAW STROMAB MOD. TR500 - CE RULES - with electronic positioning stop TIGERSTOP of 4000mm - infeed roller table of 4500mm - outfeed roller table of 4500mm - blade diameter: 500mm - maximum cutting capacity: 360 mm (L) at 60 mm (H), 135 mm (H) at 280 mm (L) - 10 hp motor - 415 volts - serial number: 1377 Hnodpfx Aiot U Izpeteu - year 2007

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. Hnjdpfoiyynwjx Aiteu additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: ready for operation (used), Year of construction: 2020, operating hours: 1,234 h, functionality: fully functional, feed length X-axis: 7,000 mm, feed length Y-axis: 600 mm, feed length Z-axis: 250 mm, feed rate X-axis: 80 m/min, total length: 8,000 mm, total height: 1,800 mm, overall weight: 2,000 kg, saw blade diameter: 500 mm, disc diameter: 500 mm, table length: 7,000 mm, Equipment: USB port, For sale: STROMAB MATRIX TR 500 optimizing saw in very good technical condition, used in a small production facility, primarily for cutting structural timber. Utilized for timber frame house prefabrication. The machine is fully operational and has been regularly serviced. Ready for immediate operation without further investment. Sold with a VAT invoice. ON-SITE TESTING AVAILABLE PRICE negotiable. Hnsdpfx Aiowp Rvhjtsu

Condition: new, Year of construction: 2025, machine/vehicle number: MR006589, High-quality, high-speed crosscut saw with automatic feed system and optimization software. This machine is equipped with a feature to detect faults in the material using chalk markings and comes with the following options: - Pneumatic feed cylinder right of the saw - Pneumatic feed cylinder left of the saw - 'OPTI' package with material length detection and additional optimization criteria - 'OPTI PLUS' package with photocell recognition of material defects - Machine with outfeed table (per meter) - Label printer - MO9416XLTD Technical specifications: - Mitre angle: 90° - Maximum cutting length: 360 mm - Maximum cutting height: 135 mm - Maximum feed length: 6000 mm - Saw list import: Yes - Chalk mark sensor: Yes - Maximum saw blade diameter: 500 mm - Motor power: 10 hp - Serial number: 10561 Hnodsy I N Akopfx Aitju

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, The HOMAG WEEKE OPTIMAT ABD 150 is a high-performance CNC machine designed for precise drilling, dowel insertion, and hardware fitting in furniture production and panel processing. This machine is ideal for cabinet makers, furniture manufacturers, and industrial woodworking operations requiring accurate and efficient automated processing. The machine features: CNC-controlled drilling and inserting unit Integrated glue and dowel insertion system Robust industrial construction Compact footprint Easy-to-use control panel CE certified The machine has been regularly maintained and is ready for operation. Hsdsym Nvtopfx Aitenu

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 241306, saw blade diameter: 500 mm, cutting height (max.): 170 mm, cutting width (max.): 395 mm, power: 7.5 kW (10.20 HP), borehole diameter: 30 mm, TECHNICAL DETAILS Max. cutting width: 395 mm Max. cutting height: 170 mm Saw blade diameter min.: 490 mm Saw blade diameter max.: 500 mm Saw blade bore diameter: 30 mm Feed table length: 5,640 mm Hnedpfsy Akvnjx Aiteu Output table length: 1,180 mm Feed speed: Automatic MACHINE DETAILS Voltage: 400 V Power consumption: 16.5 A Fuse: 32 A Power: 7.5 kW Transport weight: 800 kg Transport packages: 3 EQUIPMENT Automatic feed system

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 1000 kg Total power requirement 8,5 kw Hnedpfx Aev A Htdjiteu

Condition: new, The Newpower Generator proudly presents their new NWK250 250kVA Soundproof Plus series. These generator sets are equipped with extra sound curtains in the cabins, which guarantee a 15 percent reduction in noise levels compared to the standard series. The unit is new, complete including control, diesel tank, exhaust batteries, electronic speed controller, AVR, battery charger, cooling water heater, sockets, FI protection circuit breaker. - Reinforced soundproofing - Extra quiet operation - Grid monitoring, grid feed-in - Ready for immediate use Technical specifications: Model: NWK250 Soundproof Plus backup generator Fawde Motor Newpower generator set with extra soundproofing Engine : Fawde CA6DL2-27D , 6 cylinder, water cooled Generator: Newpower NW/N80 Continuous power: 180 kW / 225 kVA Maximum power: 198 kW / 248 kVA Noise level (7m): 67 dB Connection: 1x5P 125A-,1x5P 63A-, 1x5P 32A-, 2x2P 16A Schuko sockets, FI protection circuit breaker- 5-wire cable Frequency : 50Hz Hnjdpfxenfva Ie Aiteu Voltage: 400/230V RPM : 1500 rpm. Control: Comap IL4 AMF8 Year of construction: 2023 (new) Dimensions (LxWxH) : 3870X1380X2450 mm Weight: 3650 kg Diesel tank: 400 L. (possibility to connect to an external tank) 100% load l/h 41 75% load l/h 33 50% load l/h 21 additional costs 100A automatic switch: € 620 250A automatic transfer switch Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address