Band saw Stenner

Stenner VH105

Condition: excellent (used), Weinig four-sided planer max planing width 230mm max planing height 120mm 5 heads, bottom-5,5KW; left and right-11KW, top-11KW, bottom-5,5KW feed - 4KW Ibedpfx Aforigxyeusa fully adjustable heads electrically adjustable up and down and planing width 40mm spindles feed on gimbal rollers, with smooth adjustment WEINIG brand solid planer, length of the machine 415cm machine checked in original condition

Condition: like new (used), Year of construction: 2023, operating hours: 2 h, Deutz TCD 4.1 L4 Deutz TCD 4.1 L4 EU Stage V / U.S. Tier 4 – EPA (115 kW) Charge air and water cooler Electronic direct injection / common rail Extended idle automation with engine shut-off function ECO and Power mode Temperature-controlled fan drive with reversible fan Spatially separated high-performance cooling system Cooling system with temperature-controlled fan drive Reversible fan for hydraulic oil cooler Jump-start terminals on upper carriage Maintenance flaps, gas-spring assisted with closing aid Automatic central lubrication system, grease reservoir refillable from the ground Rear-view camera Side camera LED lighting package (equipment) LED lighting package (cabin) Stabilizer blade on the oscillating axle side, width 3m, with integrated cylinder protection Travel direction detection and steering direction reversal Electric steering lock for rigid axle Iedpfxeyh A Iie Afujba All-wheel drive and all-wheel steering Dual-circuit brake system Powershift transmission Twin pneumatic tires, without intermediate rings 10.00-20 16PR (Trelleborg T900) Wireless tire pressure monitoring Automatic oscillating axle lock Front and roof protection grilles for timber handling machines Rigid cabin system (viewing height 4.00 m) Cabin privacy glazing (side and rear window) Single-pane safety glass Sliding window in cabin door Clear glass roof window Windscreen wiper-washer system (front) Low-frequency suspended comfort driver's seat incl. seat heating and seat ventilation with synchronized armrests / joysticks Joystick steering Automatic climate control Multifunction display Document clip Reach at stick pin: 13m at grab tip: 10.7m Near-field extension for loading stick Level monitoring for coolant and hydraulic oil Attachment filter system Pipe rupture valves for lift cylinder Pipe rupture valves for stick cylinder Basic overload warning system Quick-release coupling on loading stick Wood grab available on request: 1 or 1.25 m³

Condition: good (used), Year of construction: 2003, Automatic hydraulic gluing press Kallesoe Type LV 7821 press is used for gluing wooden elements, e.g. tabletops with maximum dimensions of 7800 mm x 2100 mm, Ibsdpfxerqzgks Afusa the factor which accelerates gluing is warm water supplied to the press shelf and being in continuous circulation (it can be supplied from CO or heated by heaters mounted on the press) Heating power of the press 72kW Maximum capacity of the press up to 2000 m2 / 7.5h Glue applicator with feeder for Kallesoe press Type KL40 - used to automatically apply glue to each lamella and transfer directly to the press LV7821

Condition: used, Year of construction: 2007, spindle diameter: 45 mm, number of spindles: 6, No. 3176 Automatic planer and moulder WEINIG Hydromat 1000 Used, year of construction 2007, machine already dismantled 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished slat widths 4 - 15 mm Max. number of slats 16 pieces Slat lengths 400 - 4000 mm 1st spindle horizontal at the bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool flight circle 125 - 180 mm Ibsdpfx Afsu Agh Sjuja 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm 3. spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm Pressure shoe in front of the spindle, swiveling away, pneumatic roller contact pressure 4. spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 5. horizontal top spindle as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment travel reduced to 25 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 6. horizontal spindle at the bottom as saw spindle Brake motor 30 kW, 5000 rpm Axial adjustment travel reduced to 25 mm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm All moulder spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of the feed rollers compared to the left-hand spindle, axial 35 mm Shorter roller distance compared to the right-hand spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in the table, lateral pressure roller Automatic waxilite pump / lubricant pump Machine with 4-roller extension, pendulum shafts extended to 200 mm 2 driven, toothed rollers in the outfeed table 2 driven, toothed rollers in the machine table Pressure beam before and after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electrical height adjustment of the upper spindles and the feed Sale on behalf of customer, ex location near 39100 Bolzano (Italy), without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: like new (used), Socolest DAS 200 twin-shaft multiblade feeding and receiving table - Made in Italy - centering feeding table - discharge receiving table - top drawing rollers TECHNICAL PARAMETERS: - cutting height 200 mm - cutting width 400 mm - engine power 2 x 55 kW - track width 630 mm - disc diameter max 350 mm - feed speed 40 m / min - hydraulic roller height adjustment - hydraulic cutting height adjustment - hydraulic feed - four top pulling rollers - four rows of anti-rejection latches - shaft diameter 70 mm - sleeve diameter 90 mm - pneumatic side pressure centering - diameter of ferrules 2 x 250 mm - minimum workpiece length 720 mm - laser Ibjdpfjqup Anjx Afuja - feeding table belt 5700 mm - width of table 600 mm - top roller pneumatic pressure roller - speed of table regulated on inverter - receiving table 9200 mm - width of rollers 800 mm - diameter of rollers 135 mm - four drop chains - distance between chains 1900 mm Transport dimensions 1300 cm x 240 cm x 200 cm weight 8 t

Condition: excellent (used), belt driven Flow rate 14500 m3/h Negative pressure 3091 Pa Motor power 22 kW Speed ​​2340 rpm Suction DM 500 mm Outlet DM 400 x 500 mm Dimensions L x W x H = 1800 x 1300 x 1250 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. Ibedjh Tfqhopfx Afusa (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), High speed moulder infeed comprising a freestanding flat magazine in front of a high speed moulder. The infeed magazine is driven by hydraulic motors powered by an 5.5kW hydraulic unit (max 140m/min). Isdpfxewgbxzo Afusba A buffer of feedstock is alligned laying flat side by side on the chain cross feeder. The chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and the transport roller then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow operation of the EM814.

Condition: used, Complete pellet production line with a maximum capacity of up to 5 tons per hour (limited by dryer capacity). Pellet Presses (3 units): CPM 7122 CPM 7922-2 CPM 7930-4 (only ~200 working hours) Hammer Mills (3 units): Maier hammer mill for wet material Maier hammer mill for dry material Kamas hammer mill (for burner material production) Cooling System: CPM pellet cooler Additional Information: Electrical and control systems are fully integrated into container units Production line has been in operation for approximately 2 years Isdpfx Afjyvz Afeueba Belt conveyor, reception hopper 4 kW Dryer: distributor reception hopper 2,2 kW Conveyor belt, reception hopper 2,2 kW Worm conveyor for drum dryer 2,2 kW Drum dryer 7,5 kW Main cyclone 90 kW Sluice head cyclone 7,5 kW Fan cyclone 18,5 kW 1 Sluice cyclone 1 2,2 kW Sluice cyclone 2 0,55 kW Sluice cyclone 3 0,55 kW Worm conveyor for cyclones 1-3 3 kW Hammer mill – Maier 160 kW Hammar mill for dust burner – Kamas 110 kW Hammar mill for woodchips – Maier 132 kW Worm screw for elevator 4 kW Elevator for buffer pocket 7,5 kW Buffer pocket high/low 8/4,5 kW Scraper conveyor for the presses 2,2 kW Worm screw for dust mill 2,2 kW Press 1 CPM: Model: 7122 Main engine 160 kW Cascade mixer 7,5 kW Feeding screw 2,2 kW Oil lubrication 1,5 kW Grease lubrication 0,18 kW Press 2 CPM: Model: 7922-2 Main engine 250 kW 200 kW Cascade mixer 7,5 kW Feeding screw, frequency converted 2,2 kW Oil lubrication 1,5 kW Feeding screw 4 kW Press 3 CPM: Model: 7930-4 Work only 200 hours Main engine 250 kW Cascade mixer 7,5 kW Feeding screw 2,2 kW Oil lubrication 1,5 kW Oil cooler 2,2 kW Grease lubrication 0,18 kW Conveyor for warm pellets 2,2 kW Belt conveyor to the refrigerator 2,2 kW Pellet refrigerator, outflow 1,5 kW Fan for the pellet refrigerator 11 kW Fan for the suction 5,5 kW Elevator 2,2 kW Belt conveyor 1,5 kW Belt conveyor 4 kW Combustion air fan 45 kW Conveyor fan 22 kW Conveyor fan 11 kW Silo filter 0,04 kW Filter fan 4 kW Screw for dust silo 2,2 kW Driving motor for dust silo 1,1 kW Oil pump 1,5 kW Dosing screw 0,75 kW Sluice feeder 0,37 kW

Condition: reconditioned (used), input voltage: 400 V, type of input current: three-phase, Alfa laval HMRPX614 separator reconditioned complete with Ibodpfx Afoucq Rzjuja engine Cyclone Foundation plate Vibration damping feet Tools for bowl Compression tool for bowl

Condition: reconditioned (used), functionality: fully functional, empty load weight: 2,400 kg, Compact sawing machine with mechanical centering infeed, el.motors 2x75 kW and 2x90 kW, machine can be equipped with edging block and electric-operating cabinet with frequency converters Iedpfx Ajxfrmwjfujba TECHNICAL DETAILS Top diameter: 80-230 mm Maximum log diameter: 350 mm Minimum log length: 2.4 m Cant height in Chipper Canter: 60-232 mm Cant width in Chipper Canter: 70-210 mm Line speed: 70-150 m/min Chip length: 20-30 mm