Blasting turbine, shot blaster.

KOVO STANĚK MZ350

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 680 kW (924.54 HP), Equipment: cooling unit, condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture:2004 Nominal power 680.4 /579.2 kw Refrigerant:R404 Djdpfx Aksvllxdecocg Refrigerant content:218.9+25 liters Flow rate: Temperature range: -50°C- +100°C Max pressure: Operating pressure: 28bar/-1bar (performance depends on usage parameters) Number of fans: 5 pcs, diameter 900 mm, Air flow:162500 /131000 m3/h Motor power consumption:17.60/11.50 Kw Heat exchanger aream2 Operating noise 52 dB Length: mm Height: mm Width: mm Weight: ca kg The radiator has been technically inspected, fully functional

Condition: new, Year of construction: 2023, total length: 6,700 mm, total width: 1,500 mm, total height: 2,950 mm, warranty duration: 12 months, overall weight: 2,200 kg, power: 12 kW (16.32 HP), Machine height : ~2.950 mm Machine width : ~1.500 mm Machine width with open doors : ~2.950mm Machine length : ~2.950 mm Table diameter : 1.200 mm Maximum work piece height : 500 mm Maximum table capacity : 500 kg Number of blast wheels : 1 x 7.5kW E-Eco Frequency inverter for turbine : 1 pcs Djdpfxevr Tbaj Akcecg Blasting time : Adjustable PLC : Siemens S7 1200 + TP 4'' Filter : PC2 (1.500m3/h) Total installed power : ~10,5 kW Application for sandblasting truck rims: YES Application for sandblasting pipes from 1’’(24mm) to 8’’(203mm) :YES This type of machine can be assembled before delivery, it takes just a day to prepare it for work. The machine is in stock. A test of the machine in our premises is possible with prior notice

Year of construction: 2007, operating hours: 25,300 h, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 192-237, The LM 6000 gas turbine is a dual rotor aeroderivative turbine connected to a generator via a reduction gear. The nominal power output under ISA conditions is 45 MW. The gas turbine operated exclusively on natural gas. The turbine had run only 25,300 hours before it was sent for factory inspection and conversion at the GE facility. Turbine inspection and PD-PF conversion were completed in 2025. The gas turbine is equipped with the SPRINT system for higher power output at elevated ambient temperatures. Following the PF conversion, the turbine's emission values are compliant with GE standards. Dodpfx Akey Dq Dujcecg This set does not include the hydraulic starter, lube oil system, noise hood, air intake systems, or protection and control system!

Condition: used, Technical details: material diameter up - to:: Ø 20-30 mm material length: ca. 70 mm Numbers of turbines: 3 Stck. Beam Hour: ca. 200 space requirement approx.:: Höhe ges. ca. 4,5 m connected load: ca. 40 kW Shotblasting Line for Springs Dcodpsu Nu I Tofx Akcsg application area: - for automatically cleaning of beam technical work of springs in troughput transportation trough the plant via drag chain. - troughput speed of the chain adjustable Has been in use very little, only approx. 200 running hours plant consists of: - machine housing, internal ( (high - alloy tool steel - hardened) with interchangeable beam plates - conveyor system - 2 pieces of blasting chamber maintenance doors - bucket conveyor - beam chamber length / depth: approx. 2000mm / approx. 670mm - material steel balls Ø 0,3 - 0,8mm - material to be machined: springs Ø 20 - 30mm x L: 70mm - drive power of the traction chain 1.1 kW - -feed speed max. 15 rpm. - maximum beam feed approx. 500kg (per unit) - connected load approx. 40 kW Condition: - without turbine blades (can be retrofitted for an extra charge) i.D. *

Condition: used, functionality: fully functional, machine/vehicle number: H2X386B02278, Year of construction: 2011, operating hours: 15,632 h, load capacity: 1,400 kg, lifting height: 3,145 mm, free lift: 1,518 mm, fuel type: electric, mast type: duplex, construction height: 2,121 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-Wheel Forklift VIN: H2X386B02278 Load Center: 500 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Duplex Technical Condition: Good Front Tires Type: Super Elastic Rear Tires Type: Super Elastic Battery Voltage: 48V Battery Ah: 500Ah Battery Manufacturer: TAB Battery Type: PzS Battery Year of Manufacture: 2018 Dodpfewhtf Nex Akcjcg Battery Condition: 40 - 60% Sideshift, 3rd Valve,

Condition: good (used), functionality: fully functional, MAPELLI 3-bag sawdust extractor 11 kW Specification: • Condition – used, serviced • Manufacturer – MAPELLI • Turbine motor power – 11 kW • Turbine diameter – 70 cm • Bag shaking mechanism with control cabinet • Turbine inlet – 420 mm diameter • Filter area: 18 filter bags 25x160 cm • Airtight body with warm air return • Pipes and chimney from the photos included • Collection bag diameter – 3 x 600 mm • Overall dimensions – 395/290 x 105 x 380 cm (length/length without turbine x width x height) • Transport height – 280 cm + skids Dcedpfew U D Itsx Akceg Additional information: • Good original technical condition • Photos reflect the actual condition of the item for sale • Possibility to power up and test the machine on site

Year of construction: 2011, condition: ready for operation (used), An industrial multi-bath continuous spray cleaning system Pero for components is available. Belt width: 500mm, clearance height: 300mm, max. belt load: 40kg/m, loading height: 900mm, belt speed: 2.8m/min, cleaning volume flow: 320l/min, cleaning pressure: 2bar, machine dimensions X/Y/Z: approx. 5100mm/2100mm/2300mm. Documentation available. An on-site inspection is possible. Dedpfxoy Ax T Is Akcecg

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, filter area: 120 m², input voltage: 380 V, volume flow: 15 m³/h, total width: 2,400 mm, total length: 2,000 mm, total height: 8,000 mm, compressed air connection: 6 bar, warranty duration: 12 months, water pressure: 3 bar, water connection: 50 mm, water consumption per time unit: 200 l/min, Equipment: documentation/manual, • AIR FLOW: 15,000 m³/h • DIMENSIONS: 2000 x 2400 x h 7500 mm (approx.) • Filter surface area: 120 m² • No. 108 filters, model 2850 F.P. • Filter media: antistatic, 500 g • No. 108 cage supports with ABS venturi • Filter cleaning system: Pulse-Jet with control panel/sequencer • No. 1 perforated tube Ø 2” for internal fire extinguishing – supply at 3 bar • No. 1 explosion vent panel, installed horizontally in dedicated structure • No. 1 inspection door in hopper • No. 1 rotary valve • Conical hopper for gravity discharge of filtered dust • Support frame for height below rotary valve: h. 1500/1800 mm • Ladder with safety cage, upper safety handrail • Electrical control panel for machinery • No. 1 fan, 18.5 or 22 kW Dcodpfxey Dd E Eo Akcog Filtration unit for direct discharge into big-bags.