Industrial robot Stäubli TX200L

Stäubli TX200L

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, General Control system: SIEMENS 840 D Main spindle Bar capacity: 60 mm Speed: 6000 rpm Power: 29 kW Torque: 140 Nm Synchronous spindle Technology: Mounted on the turret Mount: Collet chuck, D = 42 mm Maximum speed: 4,500 rpm Turret 1 (X/Z) Technology: Tool turret with 8 stations Tool holder: For DIN 69880 - 25x48 mm Maximum speed: 6000 rpm Power: 3.3 kW Maximum torque: 7.5 Nm X-axis: 90 mm Z-axis: 280 mm Turret 2 (X/Z) Itodpezgcp Sefx Ahbsn Technology: Tool turret with 6 stations Tool holder: Symmetrical dovetail mount Speed: 4,500 rpm Power: 4.2 kW Torque: 7.5 Nm X-axis: 81 mm Z-axis: 80 mm Equipment Chip management: Hinged belt chip conveyor Coolant management: Coolant pump, 8 bar Part removal: Workpiece removal device Bar loader: Bar loader magazine LM 3200 Ejector: On the synchronous spindle

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC-Steuerung Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer Itjdex Hn D Ropfx Ahben - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics The machine can be viewed under power by appointment.

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: KR210 R3100 ultra KRC4, overall weight: 1,154 kg, load capacity: 210 kg, arm reach: 3,095 mm, controller manufacturer: KUKA, controller model: KRC4, teach pendant manufacturer: KUKA, Equipment: documentation/manual, IRS Robotics® Refurbished industrial robot. Itedjxxamlspfx Ahbsn Reliability as Standard. 100% complete and fully functional: robot arm, controller, all cabling, and teach pendant. Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Brand: KUKA Type: KR210 R3100 ultra Controller: KRC4 Rated Payload: 210 kg Reach: 3095 mm General purpose: For heavy payloads and much more. Delivery time: To be agreed upon. IRS Robotics® refurbished: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL color. Includes Accuracy Status Measurements (repeatability, accuracy, backlash), especially useful for 3D applications such as 3D milling, 3D printing, and 3D trimming. About: Our daily business is the reliable supply of refurbished A-Brand robots: ABB – KUKA – ABB – YASKAWA. Established in 2002. We ship worldwide.

Year of construction: 2019, condition: as good as new (ex-display), ex demo HP 3D hardly used plus accessories located near London Itsdpolgwb Sefx Ahbjn

Condition: good (used), Year of construction: 2018, Technical details are shown on picture. Isdpjzrniujfx Ahbstn Machine is in good condition. Parts shown by hand not come.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Monforts RNC 500 MultiTurn, year of manufacture 2007 The machine was last serviced by Monforts Werkzeugmaschinen GmbH in July 2025 and is in excellent condition. Itsdexcwdvepfx Ahben All tools and accessories are included. Inspection possible by appointment.

Condition: used, Year of construction: 2002, turning diameter max. 420 mm turning length 1250 mm control INDEX, C 200-4 D swing diameter 630 mm travel x1 320 mm travel z1 1250 mm travel x2 170 mm travel z2 1250 mm travel x3 320 mm travel z3 1250 mm main spindle speed max. 3000 U/min main spindle drive 53 kW spindle passage 102 mm spindle head DIN 55026 Gr. 11 max. torque on the spindle 675 Nm sub spindle - spindle speed range max. 3000 U/min sub spindle drive 53 kW sub spindle - spindle passage 102 sub spindle - spindle head DIN 55026 Gr. 11 Ijdpfet U R Hzox Ahbotn sub spindle - spindle torque 675 Nm travel sub spindle 1250 mm feed power X1 14000/Z1 14000 N rapid traverse X1 20/Z1 40 m/min feed power X2 8600/Z2 14000 N rapid traverse X2 20/Z2 40 m/min feed power X3 14000/Z3 14000 N rapid traverse X3 20/Z3 40 m/min numbers of turret head positions Rev. 1 = 12 numbers of turret head positions Rev. 2 = 10 numbers of turret head positions Rev. 3 = 12 number of driven tool stations 12 / 10 / 12 speed of driven tools max. 6000 U/min max. torque 36 / 21 / 36 Nm tool taper DIN 69880 tool taper ø 40 x 63 mm total power requirement 120 kW weight of the machine ca. 19 t dimensions of machine L x W x H 5,77 x 2,47 x 2,62 m Accessories: segment bushing chuck HAINBUCH on main spindle, collet chuck HAINBUCH, SPANNTOP SP on sub spindle, various tool holders (also for driven tools), chip conveyor, coolant - all 3 turrets are prepared for coolant through spindle, but the highpressure coolant pump and tank are not with the machine -

Condition: new, Bernardo BM 32 SB pillar drilling machine Maximum drilling capacity: 32 mm Drill chuck: 1 - 16 mm / B 18 Morse taper: MK 4 Spindle speed: (12) 150 - 2450 rpm Ijdpjd Tcchsfx Ahbjtn Overhang: 255 mm Swiveling drilling table: 360° Distance spindle / table, max.: 750 mm Distance spindle / base plate: 1210 mm Quill stroke: 120 mm Column diameter: 92 mm Table size / T-slot size: 385 x 335 mm / 14 mm Work surface of base plate: 380 x 335 mm Motor output: S1 100% 1.1 kW / 400 V Motor input: S6 40% 1.6 kW / 400 V Machine dimensions (W x D x H): 450 x 800 x 1730 mm

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF Itedpfxsy Iplfo Ahbjn 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Very little use Ex Pharma Facility

Condition: used, Year of construction: 1998, turning diameter 200 mm turning length 400 mm control Siemens type C 200-4 840 C spindle passage 65 mm Tool changer 2 x14 Pos. live tooling 2x Revoler weight of the machine ca. 4 t Main and counter spindle 3-jaw chuck with numerous jaws Hainbuch collets Many tool holders Various driven tools Bar loader "Index MBL" Chip conveyor with coolant unit Complete set of spindle reducers Iedpfxjyqvygs Ahbstn etc. see photo The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team