Bandsaw

SOITAB 850 SUP. AUT

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Bcodpfxohzbipj Ahvew Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: excellent (used), Span actual approx. 25,0 m Bsdpfx Ahjd N D U Djvecw Jibs fixed leg useable (possible)/ total (possible) max. approx. 18,5 (21,5)/22,0 (25,0) m swing leg useable/total max.approx. 12,5/16,5 m Lifting height under Spreader actual/possible approx. 11,3/14,0 m Construction/reconstruction TAKRAF/TEICHMANN Year of reconstruction 2019

Condition: used, Year of construction: 2009, cutting diameter 15 - 560 mm 560 x 630 mm Bedsvxwkfepfx Ahvocw dimensions of saw-band 7.400 x 54 x 1,60 mm Control KASTO material feed - single 900 mm multiple feeding length max. 9.999 mm cutting length min. 6,00 mm sawing motor 5,50 kW cutting speed 13 - 127 m/min height of material-table 700 mm total power requirement 12,00 kW weight of the machine ca. 6,00 t dimensions of the machine ca. 3,70 x 2,50 x H2,50 m Automatic two-column band saw with KASTO Compact Control; frequency-controlled saw band drive; chip conveyor; infeed roller-conveyor electrically driven (6m), 3x roll-conveyor 1m and outfeed roller 2m; Machine can be inspected under power.

Condition: used, Double Girder Overhead Crane 40T DEMAG Manufacturer DEMAG Type Double girder overhead crane Industrial Applications Bcodpfxsxfh Ike Ahvjw Heavy lifting in manufacturing, metallurgy, mechanical workshops, logistics warehouses, and port terminals. Main Technical Specifications - Lifting capacity: 40 tons - Span width: 28 meters - Structure: Double girder - Lifting system: DEMAG - Installation: Rail-mounted or on structural beams - Operation: Radio remote control or operator cabin - Use: Indoor or outdoor depending on industrial setup 🧩 Machine Usage The DEMAG 40T double girder overhead crane is designed for moving heavy loads across wide working areas. Its 28-meter span ensures full coverage of the operational zone, making it ideal for high-volume production and logistics applications. ⚙️ Features / Differentiators This model combines a 40-ton lifting capacity with a 28-meter span, offering high operational flexibility. The DEMAG lifting system ensures precise handling, maximum load stability, and proven durability for demanding industrial environments.

Condition: excellent (used), Year of construction: 2002, x-axis 4000 mm y-axis 3500 mm z-axis 1500 mm Control SIEMENS 840 D w-axis 1500 mm column daylight 2500 mm surface area 3000 x 2000 mm workpiece weight 10000 kg spindle turning speed range 5-6000 U/min transmission ratio 2 power capacity - milling spindle 45 kW dist. cutter spindle - workpiece spindle 3500 mm max. torque on the spindle 1250 Nm tool change unit 200 -fach tool diameter 135 / 250 mm weight of tools max. 50 kg tool length - max. 400 mm tool taper ISO SK-50 the portal milling machine is in very good condition. ADDITIONAL EQUIPMENT DRILLING/MILLING Angle milling head yes automatic tool clamping yes Tool clamping yes Ball screws yes Guideway cover yes Coolant system yes High-pressure cooling system (internal cooling) yes Full work area panelling yes Portal machining centre with tool changing system and second table top. Bsdpfx Aovwgmmshvecw

Year of construction: 2004, condition: ready for operation (used), A fully automatic Kasto band saw system is available. Cutting range at 90°: round material: 530mm, square material: 530mm/530mm, flat material: 530mm/640mm, saw blade length: 7675mm, saw blade width: 54mm, saw blade thickness: 1.6mm, cutting speed: 120m/min. Overall system dimensions X/Y/Z: approx. 5200mm/2700mm/2700mm, weight: approx. 6000kg. Including roller conveyors. Documentation available. On-site inspection is possible. Bedpjv S E Edofx Ahvocw

Condition: new, For sale, a pipe straightener from the German manufacturer SMS MEER, the machine is brand new, it was dismantled from a plant that collapsed during the delivery and assembly of the machine. The machine has two Siemens 200 kW drive motors each. Straightening rollers have a length of 460mm, diameter on the sides 400mm, diameter in the middle 300mm. Bedpfxjm H Unhs Ahvscw The weight of the machine itself is 44 tons, the total weight is 55 tons. I can send a lot of photos before dismentling.

Year of construction: 1988, condition: as good as new (ex-display), machine/vehicle number: 1116/87, MANUFACTURER: ELTERMA/IPSEN MODEL: VDFC-413 DESCRIPTION: Vacuum tempering furnace YEAR OF PRODUCTION: 1988 STATUS: New unused, need revamping of the obsolete parts ( Cabinets ) Max Load Dimensions: 610x900x500mm Bjdpsm E Tvhofx Ahvecw Max Load Weight: 500 kg Working temperature: 150-750⁰C Approximate warm-up time of the vacuum chamber at 550 ° C for 30 minutes

Condition: good (used), Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Bedpfx Ahjpbvqvsvscw Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Condition: ready for operation (used), functionality: fully functional, cutting height (max.): 1,200 mm, cutting width (max.): 1,100 mm, Danobat CP 1211T Large Capacity Bandsaw Cutting Capacity Dia / Square 1100mm Cutting capacity rectangle 1200mm wide x 1100mm high Fully automatic Bjdpfxotv Nade Ahvjcw