Engraving machine

SK LASER GmbH F20iMW1 – 20 W MOPA Faserlaser mit Work

Condition: excellent (used), Year of construction: 2002, Control: 3-axis active path control, Heidenhain TNC 123 Spindle speed: 40 - 2000 rpm, geometrically stepped direct drive with 16 gear stages for maximum torque / milling performance Feed rate: 5 to 500 mm/min, infinitely variable Rapid traverse: 1.2 m/min Quill: Extendable vertical quill, 60 mm, SK40 M16 draw thread Axes X/Y/Z: 300/160/340 mm Swivel table: 600 x 210 mm, max. load 200 kg Todpfsyg I Nfsx Apdjd

Condition: used, Year of construction: 1985, Technical details: x-travel: 485 mm y-travel: 385 mm z-travel: 380 mm control: Contour 1 Bahnsteuerung spindle taper ISO: SK 40 spindle head swivable left - right: 90° ° quill travel: 80 mm milling head vertical adjustable: 150 ( y-Achse) mm range of revolution per miute: Spindel vertical: 50 - 2.500 / 18 step U/min Todpfju Ndcmex Apdod feed:: X/Y/Z: 2 - 1000 steples mm/min rapid traverse : X/Y/Z: 2000 mm/min revolution per minute: horizontal: bis 1.000 U/min Table dimensions: 460 x 800 mm table load: 0,4 t total power requirement: 9,5 kVA machine weight approx.: 1900 kg dimension machine xH: 2,35 x 2,2 x 2,0 m -Equipment: - Operation via control panel Grundig elektronic with boom - Cooling with pump - machine lighting - Linear interpolation, circular polarization in XY and XZ planes - quick chuck - manual control unit *

Condition: excellent (used), Year of construction: 2000, turning length: 2,000 mm, spindle bore: 105 mm, spindle motor power: 21,000 W, total height: 2,100 mm, total length: 4,500 mm, total width: 2,000 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, turning diameter over bed slide: 620 mm, workpiece weight (max.): 2,500 kg, overall weight: 7,800 kg, Very little hours Hydraulic tailstock CE Safety doors Multi Fix Tool holders system  D1 Chip conveyor Swing over bed Ø: 620mm Swing over cross slide Ø:370mm DBC Turning Length: 2000mm Spindle bore: 105mm Spindle power: 21kW Tailstock spindle Ø: 100Ø Stroke pinole: 200mm Spindle taper: 6Mk Workpiece weight: 2500 Speeds / ranges: 1600Rpm Tsdjyuchrjpfx Apdsd Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Length: 4500mm Width: 2000mm Height: 2100mm Weight: 7800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 320 path control in very good CONDITION CE compliant!! Technical data: >> Year of manufacture 2006 Machine-No. 348013 >> Rigid angle table >> Speed: stepless up to 4500 rpm >> Feed stepless in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min Z axis 4000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m Tjdjwrhxfjpfx Apdjd >> Drive power: 15 KVA Accessories and equipment: >> Heidenhain TNC 320 path control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare part diagrams, operating instructions for the control and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the machine: A Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 320 path control is being offered. This universal milling machine is in very good condition. It comes from a company where it was only used a little for training. A very easy-to-use control. Furthermore, the machine has hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal is very simple, thanks to the fold-away vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and test the Kunzmann live on site under power.

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, DECKEL FP4M Universal milling machine (1984) Serial number: 2203-1545 Control: HEIDENHAIN POSITIP 855 Travel distances: X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Rapid traverse rate: 1300 mm/min Feed rate: 8 – 630 mm/min Table dimensions: approx. 800 x 460 mm Max. table load: approx. 600 kg Spindle speed range: 50 - 2500 rpm Tool holder: SK40 Todpfszmhlfox Apdod Without machine vice.

Condition: ready for operation (used), Year of construction: 2020, A Panasonic laser marking machine (laser marking station) with a defective laser head is available. Travel X/Y/Z: 500mm/430mm/350mm, marking range X/Y/Z: 720mm/430mm/350mm, machine dimensions X/Y: approx. 800mm/1900mm. Documentation available. On-site inspection is possible. Tsdpfx Apjv Rfqqedod

Condition: reconditioned (used), Universal Tool Milling Machine Make: harich (DECKEL) Model: B (FP 2) Aktiv Refurbished with CE certification Geometric inspection with test protocol with warranty Accessories: - 3-axis digital readout Heidenhain Positip 8016 - Fixed table or universal table - Vertical milling head SK 40 - Centralized manual lubrication - Coolant system - Operating manual CE and safety equipment: - New machine electrics with control cabinet - Electronically monitored cover on the vertical milling head Todpfx Ajx A T Evepdod - Chuck guard with electrical interlock - Drive motor with brake function - Control panel with emergency stop, enable, start and stop buttons, potentiometer for feed rate adjustment - New documentation for machine and control cabinet - CE declaration of conformity

Condition: excellent (used), Year of construction: 2003, Tool holder, vertical + horizontal SK 40 Table size L x W 710 x 315 mm Speed range, vertical spindle 63 – 2500 rpm Speed range, horizontal spindle 45 – 1800 rpm Travel ranges: X-axis, longitudinal adjustment, automatic / manual 400 / 420 mm Y-axis, cross adjustment, automatic / manual 220 / 228 mm + cross slide 375 mm Z-axis, vertical adjustment, automatic / manual 350 / 380 mm Adjustment of the quill, vertical, manual 80 mm Machine dimensions, approx. 1550 x 1620 x 1850 mm Machine weight, approx. 1300 kg Accessories / Special features: • 3-axis digital display, manufacturer HEIDENHAIN • Infinitely variable feeds with rapid traverse in the 2nd feed stage • Two working spindles for horizontal and vertical tool holders (vertical milling head does not need to be removed during machining when the horizontal spindle is in use) • Ball screw spindles for the X and Y axes, simultaneous milling in X and Y direction possible • Trapezoidal screw spindle, hardened and ground, for the Z axis (vertical) • All operating elements on one side, in the mobile control panel • Additional manual adjustment of the cross slide increases the working area of the machine, even beyond the table surface Tsdpfeziutzjx Apdsd • Safety handwheels • Tool holder according to DIN 2080 – steep taper ISO 40 • Automatic central lubrication for speed and feed gears • Vertical milling head with quill, swiveling L+R • Fixed angle table 315 x 710 with 5 slots 12 mm, spacing 63 mm • Tool clamping spindles, horizontal and vertical • Splash guard made of Plexiglas on 3 sides of the horizontal table • Coolant system • CE compliant TOP condition! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 1,550 mm, total height: 2,050 mm, total length: 900 mm, overall weight: 120 kg, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, laser wavelength: 1,064 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Tsdpfowkpx Rjx Apded The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 W, 20 W or 50 W - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus system - system for automatically determining the focus distance - EZCAD marking software in German / English - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Year of construction: 2019, condition: used, Travel X/Y/Z: 650mm/500mm/475mm, table dimensions X/Y: 1530mm/450mm, max. table load: 400kg, spindle taper: SK40, max. spindle speed: 4000rpm, spindle power: 7.5kW, milling head swivel range: 140°, control: Heidenhain TNC 620. Weight: approx. 2750kg, machine dimensions X/Y/Z: approx. 2200mm/2300mm/2050mm. An on-site inspection is possible. Tsdozwgidepfx Apdod