10,875-liter heatable/coolable reactor with anchor agitator made of V2A stainless steel

Schleifenbaum & Weber 8139

Condition: used, Used concentration / evaporation system previously used to separate water from surfactant. Capacity for this process was approximately 8-12 m3/day of water/surfactant mix. System was built by Ecotecno during 2011/2012 and was shut down in April 2022. Nkedpsw U A Hbjfx Ad Net System described as a single effect vacuum evaporator with condenser. Includes flash reservoir in vacuum, distillate tank, vacuum tank, plate heat exchanger. Full documentation for equipment available.

Condition: new, Year of construction: 2025, Conveyor system for powder products. Stainless steel housing with stainless steel tube. Motor mounted at bottom of machine with screw feeding device. Infeed hopper with 230 liter volume. Capacity 3 to 5 m³/h depending on product. Nkedpfev Nmnnox Ad Not Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Vertical insulated tank 100m³ Nkodpfx Ajxl Th Ned Net Diameter 3.85m Height 11.25m The tank is insulated with mineral wool It is lined with trapezoidal sheet metal It has space for a side agitator The tanks are dismantled, ready for loading.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Preheating boiler (oil) Aura AKL 2504 G ▪ Power: max. 2500 kW ▪ Flow rate: max. 99 m3/h ▪ Pressure: max. 10 PS ▪ Temperature: -10 / 315 °C ▪ Volume: 1873 L Burner Weishaupt WM-G30/1-A ▪ Power: max. 3500 kW ▪ Gas type: Natural ▪ Pressure: max. 1 bar Njdpfsxfa Tlex Ad Njkt

Condition: used, functionality: fully functional, total height: 6,500 mm, tank capacity: 36,900 l, inner diameter: 3,200 mm, TECHNICAL SPECIFICATIONS Nkedpfewvu H Rex Ad Njt - Tank with sloped bottom on skirt - Material: 304 stainless steel and 316 stainless steel dome - Capacity: 369 HL - Temperature controlled: shell and flag circuit ROOF - 1 central chimney with hatch - Gas connection on chimney - Power supply inlet for 1 flag - 1 walkway support - Lifting rings RING - 1 ladder support bar - 8 shell circuit turns over 1000 mm - 1 thermometer - 1 tasting tap - 1 Bellot rectangular door opening outwards, with 1 DN 70 butterfly drain valve on square flange - 1 DN 40 riser pipe - 1 support and level tap - 1 DN 70 butterfly drain valve on square flange BOTTOM - Sloped on skirt DIMENSIONS - Diameter: 3200 mm - Height: 6500 mm

Condition: excellent (used), functionality: fully functional, usable tank capacity: 60,000 l, total height: 11,500 mm, inner diameter: 2,900 mm, outer diameter: 3,000 mm, wall material: stainless steel, Agitator Tank made of Stainless Steel (V2A), Insulated (Milk Tank) Technical Data / Dimensions Available quantity: 5 Volume: approx. 60,000 liters Tank type: Agitator tank Condition: used Food-grade: yes Design: vertical Nkodpfxexw Rrpj Ad Net Internal diameter: approx. 2,900 mm External diameter: approx. 3,000 mm Cylindrical height: approx. 8,100 mm Total height: approx. 11,500 mm Specific gravity of medium: 1.0 t/m³ Operating pressure: non-pressurized Operating temperature: 40°C Notes: former milk storage tank Material / Construction Internal shell material: V2A (1.4301) Foot material: stainless steel Internal weld seams: ground smooth Insulation Insulation thickness: approx. 50 mm Insulation material: PU foam Insulation shell material: stainless steel Insulation shell: diffusion-tight welded Notes: The insulation shell of the tank has some minor dents which do not affect its functionality. Equipment Support design: foot ring / support skirt Mounting: fixed Top head: conical Cone angle: approx. 15% Bottom head: conical Top head features: 1 x vent hood with mesh 1 x CIP nozzle 1 x threaded socket for level limit measurement 2 x lifting lugs Shell features: 1 x oval manway, swing-type (approx. 340 x 440 mm) 1 x oval manway (approx. 340 x 440 mm, in support skirt) 1 x agitator flange with agitator 1 x threaded nozzle for temperature measurement Bottom head features: 1 x threaded nozzle for temperature measurement 1 x nozzle for level limit measurement 1 x residue drain Notes: The connection configurations differ slightly between the 5 tanks Agitator Agitator included Type: propeller Classification: high-speed Quantity: 1 Mounting position: lateral Speed: 940 rpm Agitator power: 2.2 kW Impeller length: approx. 600 mm Manufacturer: Stelzer Notes: Some agitators supplied with stainless steel cover

Condition: used, Aqua’s optimised adiabatic cooling system achieves a perfect balance between load, water usage and fan speed. The innovative control management system engages the water spray only when absolutely necessary. This ensures maximum water evaporation with minimum water wastage. In addition, all spray pipework is constructed in stainless steel rather than plastic, eliminating any risk of corrosion. The coil is protected with a hydrophilic coating. Adiabatic coolers are low-maintenance, cost-effective, and environmentally friendly options for temperature control at your facility. They are a popular alternative to cooling towers and are used in situations requiring water temperatures of 25˚C and above. Nksdpswv Raasfx Ad Njt

Condition: used, tank capacity: 8,550 l, GENERAL Equipment: Crane lugs Design: Suspended Remarks: Feet made of Fe; Flanges partially made of Fe Speed: 8.5 - 51 rpm Internal diameter: 2,000 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Overall height: 5,200 mm Heating/Cooling: present Power: 15 kW Max. allowable operating temperature: 200°C Max. allowable operating overpressure: 6.0 bar Max. overpressure: 3.2 bar Mechanical seal: Mechanical seal with thermosiphon vessel Agitator: Anchor agitator Support type: Feet Location: Bremen Technical documentation: Drawing, TÜV certificates Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 8,550 liters Double jacket volume: 160.0 liters Cylinder wall thickness: 8 mm Product-contact material: V4A 1.4571 (AISI316) Condition: Used Cylindrical height: 2,200 mm Last application: Pharmaceutical chemistry VESSEL Max. allowable operating temperature: 200°C HEATING/COOLING JACKET Bottom temperature control: Half-pipe coil EQUIPMENT Manway / Dome: In top head (DN 500) Outlet: Flange DN150 MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Agitator manufacturer: Ekato Voltage: 380 Volt Interference suppressor: TECHNICAL DATA / DIMENSIONS Bottom plate wall thickness: 8 mm Agitator arrangement: Centered in the top head Agitator equipment: Drive was controlled by an external speed controller by the previous owner (no longer present) Top head wall thickness: 10 mm Nkodpfxsxqah Ts Ad Not

Condition: excellent (used), Year of construction: 2003, tank capacity: 14,100 l, total width: 3,000 mm, total height: 5,700 mm, overall weight: 2,800 kg, operating temperature: 150 °C, negative pressure: -1 Pa, pressure (max.): 3 bar, Reactor by E.BACHILLER, manufactured in 316 stainless steel, with agitation and jacket. Year 2003. Nsdpfx Adsxnyp Ss Nokt Lower Klopper head with DN50 and DN80 connections. Side connections: DN25 and DN50. Upper Klopper head with manhole, 495 mm diameter. Connections: 5 DN25 flanges, 10 DN50 flanges, DN80, DN100, and DN150. Mounted on 4 support brackets. Vessel pressure: -1/+3 bar Jacket pressure: 10 bar Temperature: 150 ºC Jacket volume: 340 liters. Agitator motor: 11kW at 1465 rpm.

Condition: used, tank capacity: 6,510 l, GENERAL Design: suspended Remarks: Several connections have been modified by the previous operator (not listed in TÜV documents); vessel supported on 3 lugs made of Fe (not on 4 lugs as shown in the drawing); heating coil in the cylinder only in the lower section; insulation jacket with sheet metal cutouts and dents Speed: 73 rpm Internal diameter: 1,900 mm Total height: 4,450 mm Heating/cooling: available Insulation: available Power: 5.5 kW Max. permitted operating temperature: 165 °C Max. permitted operating overpressure: 6.0 bar Max. overpressure: 2.00 bar Agitator: beam agitator Location: Bremen Technical documentation: Drawing, TÜV documents Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.00 bar Volume: 6,510 liters Double jacket volume: 34.0 liters Cylinder wall thickness: 7 mm Double jacket material: V2A 1.4301 (AISI304) Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,800 mm Last used for: Ethanol VESSEL Max. permitted operating temperature: 165 °C Stand type: lugs Number of legs: 3 HEATING/COOLING JACKET Bottom temperature control: half-pipe coil INSULATION Insulation jacket: bolted Insulation material: Armaflex Insulation jacket material: aluminium EQUIPMENT Manhole / dome: in the top head (DN 600) Outlet: flange DN65 Note: slight residue AGITATOR Agitator manufacturer: Ekato Voltage: 230/400 Volt Current interrupter: Agitator arrangement: centrally in the top head TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 7 mm Nsdpfx Asxqbaqod Nskt Top wall thickness: 8.0 mm