Belt Grinding Machine

SCANTOOL 75 - 2000

Condition: new, Industrial belt sander Scantool 75 x 2000 Sanding belt 75 x 2000 mm Working width: 75 mm Motor: 4.1 hp Speed: 34 m/s Table height: 475 to 1240 mm Sanding belt dimensions: 75 x 2000 mm Platen size: 530 mm Weight: 76 kg The Scantool industrial belt sander models 75 x 2000 and 150 x 2000 are powerful, high-quality machines, built according to the strictest environmental and safety regulations. The belt sanders are equipped as standard with a motor brake, adjustable working height, eye protection, angle stop, and motor protection switch with zero-voltage release. The low-noise machine with CE marking is ideally suited for sanding all metals. Bdodpfx Aod Dw Ncspdei Motor protection switch with zero-voltage release Separate emergency stop Motor brake Adjustable angle stop Eye protection The infinitely adjustable working height enables an ergonomically correct working position. Perfect design for fast, effective, and safe sanding. Self-adjusting belt tension. Danish top quality.

Condition: excellent (used), throat depth: 1,100 mm, nominal power at 50% duty cycle: 96 kVA, short-circuit current: 31,500 A, input voltage: 400 V, type of cooling: water, overall weight: 830 kg, Equipment: type plate available, Spot welding machine, type PMS 11-4 G3, 3-phase DC version - specifically designed for welding aluminum sheets - rarely used, completely inspected and cleaned - fully functional, ready for demonstration - rated voltage 400V/50Hz - rated power 96 kVA - welding current 23 kA Bdjdpfxsh N Sc Ee Apdei - connection cable cross-section 10 sq mm/phase - fuse rating 63A - arm reach 1050 mm (!!) - electrode arm diameter 60 mm - electrode holder diameter 30 mm - electrode force 600 daN - stroke 65+25 mm - electrode cone MK2 - control unit MPS 8043/1 from Harms & Wende with current ramp-up and pulse function - with operating manual - 2-stage foot switch according to UVV standards - main machine switch - pneumatic maintenance unit - weight approx. 830 kg - complete documentation with wiring diagram, compressed air circuit diagram, and cooling water circuit - VAT can be shown separately - delivery from warehouse in Dresden approx. 4 days within Germany - export may take longer! On-site commissioning is subject to a charge and will be billed according to the actual effort involved. The machine is located in Dresden, near the A17 highway, and can be inspected and demonstrated by appointment.

Condition: new, Industrial belt sander Scantool 75 x 2000 with integrated dual dust extraction system Sanding belt 75 x 2000 mm Working width: 75 mm Motor: 4.1 HP Speed: 34 m/s Table height: 475 to 1240 mm Sanding belt dimensions: 75 x 2000 mm Platen size: 530 mm Weight: 100 kg The Scantool industrial belt sander models with dual dust extraction system, 75 x 2000 and 150 x 2000, are powerful, high-quality machines built to the strictest environmental and safety standards. The belt sanders are equipped as standard with a motor brake, adjustable work height, eye protection, angle stop, and motor protection switch with zero-voltage release. This low-noise machine with CE marking is ideally suited for sanding all metals. Motor protection switch with zero-voltage release Separate emergency stop Motor brake Adjustable angle stop Bodpfsflt Amjx Apdsdi Eye protection The continuously adjustable work height enables an ergonomically correct working position. Perfect design for fast, efficient, and safe sanding. Self-adjusting belt tension. Danish top quality.

Year of construction: 1990, condition: used, machine/vehicle number: 9072492, nominal capacity: 100 kVA throat: 500 mm spark plug air gap: 330 - 500 mm electrical connection: 400 V kW space needed: 700 x 1420 x 2000 mm weight: 750 kg Bdsdpfx Aez H Dyjpdei

Condition: good (used), functionality: fully functional, Year of construction: 2015, Four-Roller Plate Rolling Machine Manufacturer: FACCIN Model: 4HEL 2122 Year: 2015 Technical Specifications Brand: FACCIN Model: 4HEL 2122 Year of manufacture: 2015 Working width: 2050 mm Roll geometry: Linear guides Top roll diameter: 225 mm Bottom roll diameter: 210 mm Side roll diameter: 165 mm Bending force against top roll: 100 t Motor power: 9 kW Dimensions (approx.): L 3.50 x W 1.20 x H 1.10 m Weight (approx.): 4,200 kg Performance Rolling capacity (full working width): 12 mm Pre-bending capacity (full working width): 8 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Bodpfszguumsx Apdedi Pre-bending capacity (full working width): 6 mm From tube diameter: 295 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 1,125 mm With yield strength: 360 N/mm² Rolling capacity (full working width): 6.5 mm Pre-bending capacity (full working width): 5 mm From tube diameter: 295 mm With yield strength: 360 N/mm² Rolling capacity (half working width): 15 mm Pre-bending capacity (half working width): 10 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Equipment - Double linear guide system for roller movement - Extra wide bearing blocks - MCS double bearing system for roll rotation - Extra heavy-duty, doubly supported drop end bearing - Electronic parallelism system (EPS) - Hardened rolls for maximum wear protection and reduced sheet damage - All rolls polished after heat treatment - SIEMENS S7 PLC touch control - Safety cable with emergency stop and CE certification - Water cooler for hydraulic unit All details without guarantee. A live demonstration under power is possible at any time in our showroom.

Condition: refurbished (used), Year of construction: 1988, Graver grinding machine Make: Maschinenfabrik Baden-Baden Model: FSS Year of manufacture: 1985 - overhauled, repainted RAL7012 basalt gray, RAL 7035 light gray Machine no.: 2992 Warranty: 12 months single layer from delivery, on the mechanics overhauled by us. The electrics and electronics are excluded, as they have only undergone a functional test. For machines located outside our northern Bavarian sales area, travel costs are to be borne by the customer. Accessories: - Grinding wheel with flange - Operating instructions Bsdpfx Apetqdqgjdedi incl. new electrics On/off switch in new housing with undervoltage coil to realize the restart protection z. e.g. in the event of a power failure or if the mains plug is pulled out Used as seen The machine corresponds technically the state of the year of manufacture at that time.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, travel distance X-axis: 310 mm, travel distance Y-axis: 310 mm, warranty duration: 12 months, pump pressure: 2,000 bar, power: 3.7 kW (5.03 HP), OMAX ProtoMAX® – the smallest industrial-grade waterjet cutting system in the world! Its compact design, combined with its comprehensive versatility, makes the ProtoMAX® waterjet cutting system a perfect solution for applications such as the production of small batches and prototypes, as well as for educational purposes. Furthermore, the ProtoMAX® can also be used as a complement to larger waterjet cutting systems. Thanks to its small footprint, the ProtoMAX® waterjet cutting system is ideally suited for smaller spaces. Mounting the system on rollers allows for easy and straightforward relocation. ✔ 3.7 kW pump with 2,000 bar operating pressure ✔ Cutting thickness up to 25 mm for a wide range of materials ✔ Efficient and reliable pump technology with direct drive ✔ Includes laptop with pre-installed CAD/CAM software ✔ Quiet and clean underwater cutting (< 76 dB) ✔ Protective cover with safety switch ✔ Clamping device for securing the material Bjdpey Umphofx Apdodi A timely delivery can be arranged with INNOMAX AG. This is a demonstration machine.

Condition: reconditioned (used), Steel grinding machine Manufacturer: REMA Model: DS 07/ST Version with reversible motor 0.22/0.37 kW 1450/2900 rpm Year of manufacture: unknown Serial no.: 022857 Equipment: - Reversing switch for right/left rotation - Benchtop version with chip tray - Wet grinding system - 2 pcs. support table ATS (left) adjustable from -5° to +15° and with spring suspension - 2 pcs. angle stops - Adjustable support table ATK (right) for grinding chip guide steps - Steel holder for support table ATK 360° rotatable, pivotable, with height adjustment and knurled screw for adjusting the chip depth - Enlarged protective cover (left) with silicon carbide cup wheel Ø 175 mm with mounting flange Bdedpfx Apshvu Tmedsi - Protective cover (right) for grinding wheels Ø 125 mm with mounting flange - Operating manual Used, as is, no guarantee

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, CNC Vertical Machining Center HERMLE B 300 V Bjdpszf Ik Ejfx Apdsdi With Heidenhain iTNC 530 path control Year of manufacture: 12/2010 Travel ranges: X 800, Y 600, Z 500 Spindle speed range: 20 – 15,000 rpm, stepless With the following accessories: Fixed angular table, 1000 mm x 560 mm clamping surface Vertical tool changer with 30 magazine positions (SK 40) IKZ 40 bar Chip conveyor Coolant system Manual cabinet door, manual cabinet roof Polycarbonate safety screens Electronic thermal compensation iTNC 530 Electric hand control module HR 410 3D measuring probe Renishaw Control cabinet cooling unit (RITTAL) Spindle oil cooler 4 adjustable machine feet Operating manuals

Condition: new, Ostas Profile Ring Bending Machine OPK 125 Bdsdsxrd Rnopfx Apdsi Technical Specifications: • Tool holder, shaft: 120 mm • Tool: 390 mm • Working speed: 2-7.5 m/min • Motor: 15 kW • Dimensions (L-W-H): 2000 x 1700 x 1950 mm • Weight: 4850 kg • 3 rollers are driven separately by a hydraulic motor and planetary gearbox • Hardened standard rolls • Hardened and ground tool holder, shaft • Mobile control panel • Horizontal and vertical working position • Hydraulic side supports • Digital displays (2 pcs.) • In accordance with CE standard