Lathe with tubular axle

SARO SN 710x10000

Year of construction: 1984, condition: ready for operation (used), Rafamet UBB 112/2 Wheel Tread Diameter Minimum 700 mm Ksdpfxohvml Is Ah Nedg Wheel Tread Diameter Maximum 1120 mm Clamping length 540 - 1050 mm Wheelset Axle Length Minimum 1640 mm Wheelset Axle Length Maximum 2800 mm Maximum Tire Width 150 mm Maximum Wheelset Weight 4000 kg Saddle Set Up Motion Speed 2000 mm/min Saddle Feed Maximum 2000 mm/min Main Drive Motor Power 80 kW Weight aprox 40000 kg

Condition: good (used), Year of construction: 1998, table diameter 1800 mm turning diameter 2060 mm swing diameter 2000 mm work height max. 1557 mm Kdedpfx Ahjw H Dkme Nsg power capacity - milling spindle 30 kW workpiece weight 12 t table drive 100 kW gear box 2 Stufen grinding spindle drive 30 kW milling spindle SK50 with Grinding device

Condition: good (used), grinding diameter: 1,600 mm, grinding length: 6,000 mm, Manufacturer: CINCINNATI Type: 60 x 216 Year of manufacture: 1970 Covex and Concave grinding 6 steady rest included 2 steady rest hydrostatic Coolant system with magnetic filter Measuring system with 5 arms caliber: Arm 1: Working area 1300 to 1600 mm Arm 2: Working area 1000 to 1300 mm Arm 3: Working area 700 to 1000 mm Arm 4: Working area 400 to 700 mm Specifications Metric US Standard Center height 787 mm Grinding diameter Ø 1574 mm Grinding length 5800 mm Grinding stone dimensions 914 x 101.6 x 304.50 mm Grinding stone speed 1800 rpm Dimensions (estimate) Length 15100 mm Width 5500 mm Height 3550 mm Kdodpfx Ajvvvw Ejh Neg Weight 120000 kg Please note: The information on this page is correct to the best of our knowledge and belief and, where possible, has been obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Initial commissioning: 2000 Control system: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ±110° C-axis: ±300° Clamping table Kedpsw Rl S Ssfx Ah Njdg Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic Spindle freshly overhauled at the end of 2024! Linear axis drives Feed rate X, Y axis: up to 20 m/min Feed rate Z axis: up to 20 m/min Axis acceleration X, Y, Z: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions & weights Machine footprint with peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - 3-sided enclosure, without extraction ducts - The additional clamping table shown is not included in the scope of supply Condition of the machine Fully functional, in very good condition. Machine remains connected and is available immediately.

Condition: used, Year of construction: 2000, x-travel 3.700 mm y-travel 3.050 mm Kdjdpfx Ahjwg Hrge Nsg z-travel 1.000 mm Control HEIDENHAIN TNC-430 PA distance between columns 2.300 mm 1.175 mm rapid travel x/y/z 25.000 mm/min feeds 15.000 mm/min tool taper ISO-50 - DIN 69871 table weight 20.000 Kg spindle drive 37 kW milling head -swivable +/- 45 ° milling head AB Achse 360.000 pos. Tools changer 30 fach/tools Chip coveyor Ink. Internal cooling system 20 bar table-size 4.000 x 1.800 mm weight of the machine ca. 42 t

Condition: good (used), Year of construction: 2009, feed length X-axis: 6,000 mm, feed length Y-axis: 3,000 mm, feed length Z-axis: 1,500 mm, controller model: HAIDENNAIN, workpiece length (max.): 6,000 mm, workpiece width (max.): 2,500 mm, table width: 6,000 mm, table length: 2,500 mm, Portal milling machine with 5-axis head Ksdpfxovcqybe Ah Nodg

Condition: ready for operation (used), Year of construction: 1978, travel distance X-axis: 4,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 2,066 rpm, table width: 1,000 mm, table length: 6,100 mm, overall weight: 19,000 kg, 3-axis Newall display with variable feed rate 50-speed head with continuously variable spindle speeds, max. 1,500 rpm 6100 x 1,000 mm table 4500 x 1,000 x 1,000 mm stroke 19-ton weight Kdjdpsvz Aydefx Ah Nog

Condition: used, Year of construction: 2000, Boring Mill Manufacturer: TOS Model: VARNSDORF WHQ 13.8 CNC Year of manufacture: 2000 CNC Control: Heidenhain 426 Kdsdpjx A Ayiofx Ah Nog Completely overhauled in 2022 Report available Travel (X/Y/Z): 3,500 x 2,500 x 1,250 x B800 mm Number of axes: 5 Table length: 2,200 mm Table width: 1,800 mm Clamping surface: 1,800 x 1,600 mm Table load: 12 t Number of tool stations: 60 Spindle taper: SK 50 Spindle diameter: 130 mm Spindle speed: 2,500 rpm Power: 90 kW Heidenhain handwheel Telescopic covers completely overhauled with new wipers. Dimensions (LxWxH approx.): 7,500 x 6,950 x 4,000 mm Weight: 40 t.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: GM2000.5000 H-322.41.9000.3E 130.20, Load capacity 5t Reeving 4/1 Kodpfxevx E I Sj Ah Nodg Lifting height 9m Lifting speeds 8/1.3m/min Cab travel speeds 20/5m/min FEM group 2M Operating voltage 400V Control voltage 230V Flange width 300mm Several immediately available in stock

Condition: like new (used), turning diameter: 1,500 mm, MAXIMUM WORK DIAMETER : 1600 mm. MAXIMUM WORKING LENGTH : 3000 mm. Kdedpfx Ahsr Ui R No Neg DIAMETER OF LANTERN SHAFT : 83 mm. OUR MACHINE IS ACTIVE WITHOUT ANY PROBLEMS ALL REVOLUTIONS AND AUTOMATICS ARE IN VERY GOOD CONDITION