Corner clamp for frames Saomad

SAOMAD Operator 5

Year of construction: 1998, condition: excellent (used), I sell the window production set: Gedpofzzhyofx Acwebk 1pc. tenoning profiling centre Weinig Unitec 10 1pc. profiling automat centre Weinig Univar 10 Year 1998. Moulding heads OERTLI. Available immediately. Total price 17.000 euro. Condition very good !

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Storage location: Garbsen Godpfx Ajxnlgcocwobk

Year of construction: 2014, condition: used, PROLOGIC window construction software FenOffice 14 Conturex Gbodpjrci S Ssfx Acwsk

Year of construction: 1995, condition: excellent (used), The line consists of the following components: 1) Weinig Profimat 23 milling machine 2) Band Feeder KOCH -T-100-B (250x4550) 3) Weinig Uniplan milling machine 4) Band Feeder KOCH T-100-B (250x7050) 5) Tenoning machine KOCH SF -3 5a) Bottom feeding belt for waste (at tenoning machine 300x6050) 5b) Side feeding belt for wastes (at tenoning machine 300x1800) 6) Belt feeder KOCH T-100-B (250x5020) 7) Belt feeder KOCH T-100-A (300x3050) 8) Belt feeder KOCH T-100-B (300x3500) 9) Band feeder KOCH T-100-B (300x4530) 10) Weinig U2G milling machine 11) Feeding belt KOCH (250x4050) Line worked very few hours, is like new. Year of production machines included in the line is 1995. In addition, for each machine I add a set of Leitz cutters for the window with a profile of euro 68. Gbsdpfxjhm Exdj Acwsk The cost of a new line is currently more than 1 million euros.

Condition: good (used), Code: 0321 Gsdpfx Aoytn U Iocwjbk Brand: SCM Model: MULTIFLEX C - CE Standard Automatic working center for window frames for tenoning, profiling and contouring - Max workpiece thickness mm 140 - CE Standard Technical data Automatic carriage with chipbreaker Max working length 2800 mm Min/max workpiece thickness 30/140 mm End cutting saw diameter 400 mm - Motor Hp 4 Tenoning spindle useful length mm 320 - Motor Hp 10 Spindle diameter mm 50 Max tool diameter mm 350 Profiling spindles: 1° Anti-splinter profiling spindle length 320 mm - Motor Hp 7,5 - Tool diameter mm 220 2° profiling spindle length mm 320 - Motor Hp 7,5 - Tool diameter mm 220 Min and max diameter of profiling spindles tools mm 100/220 Profiling spindles diameter 50 mm Tool group Zuani Variable speed feed Glazing bead recovery group - Motor Hp 3 - Diameter of suction mouth mm 50 Overall dimensions mm 2400 x 3300 x 2000 h Weight kg 2200

Condition: used, Year of construction: 2005, functionality: fully functional, length stop: 3,200 mm, tool diameter: 400 mm, spindle diameter: 50 mm, spindle stroke: 640 mm, spindle speed (max.): 3,000 rpm, milling spindle length: 320 mm, saw blade diameter: 400 mm, height adjustment type: electric, type of input current: AC, working height: 130 mm, working width: 200 mm, SCM Windor 60/100 – Angle Processing Center Manufacturer: SCM Group Year of manufacture: 2005* 1. General Description of the System The system in question is a window and door production line of the type Windor 60/100 from the manufacturer SCM Group, built in 2005. It is a CNC-controlled angle processing center designed for the industrial machining of frame and sash components. The system is configured for series production and enables precise, repeatable machining in integrated process steps. 2. Main Components of the System 2.1 SCM Windor 60/100 Angle Processing Center The SCM Windor 60/100 features a modular design and is configured as an angle processing unit. Machining takes place on a tenoning side and a profiling side positioned at right angles to each other. The system combines several machining steps – such as milling, drilling, grooving, rebating, and tenoning – in a fully integrated, CNC-controlled process. Key Features: * CNC multi-sided machining * Multiple milling and processing spindles * Automated tool handling and changeover * High dimensional accuracy and repeatability 2.2 Fleximat Drilling Center The Fleximat drilling center is integrated into the system and is used for the precise execution of boreholes for joints and fittings. Machining is CNC-controlled with both vertical and horizontal drilling units. 2.3 Profiler Center The profiler center is designed for contour-forming milling operations and consists of two processing sides: Right side: * Lifting spindle with height adjustment * Suitable for variable profile and contour processing Left side: * 24-position tool changer Gbodpfx Aox Nqqxocwek * Automatic tool changing to minimize setup times * Suitable for complex profile milling 2.4 Löwer Surface Sanding Machine A surface sanding machine from Löwer is integrated into the production line. The machine is used exclusively for surface sanding, serving to improve the surface quality of the processed workpieces. 3. Control, Operation, and Safety The system is equipped with a CNC control unit that manages all machining operations, tool changes, as well as feed and spindle movements. Operation is semi- or fully-automated by trained personnel. The safety features are state-of-the-art as of the time of construction (2005) and include, in particular: * Mechanical guards and enclosures * Emergency stop devices * Safety locks on moving machine parts 4. Optional Expansion: SCM Topset XL Planer (10-spindle) For expansion of the existing machinery, provision has been made for a SCM Topset XL planer with 10 spindles. This machine will be operated as a standalone processing station at a separate location within the production hall and is not directly integrated into the CNC control of the Windor system. The system is available and can be dismantled at any time. Dismantling and transportation are to be organized by the buyer. Available from 07.01.2026

Condition: used, Year of construction: 2021, Number of spindles 5 St. Working width 250 mm Working height 160 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. control K2 Basic 7"-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm, spindle 4.5 to 8,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carrier motor-controlled - Additional motor-controlled positioning: right spindle radial and axial Gbsdpfx Ajwgwmnjcwsk left spindle axial - working width 250 mm TECHNICAL DATA ----- Working width (perimeter of tools 163 mm) 15 - 230 mm Working height(perimeter of tools 163 mm) 10 - 150 mm (perimeter of tools 123 mm) 10 - 160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter of the chip removal and feed speed. If necessary adjustments to the operating parameter have to be done. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 250 mm Usabale length for tools Spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 125 - 160 mm Reference cutter Diameter difference 20 - 25mm to the cutterhead Connecting piece D = 125 mm Quick action lock nut Pro-Lock 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Adjustable table plate to tool radius Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Standard profile depth 20 mm Adjustable table plate to tool radius Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Pressure shoe pneumatically, via linear guides dynamically adjustable Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle lenght minus approx. 6 mm Drive, frequency-controlled...

Condition: excellent (used), Year of construction: 1992, beautiful machine in good condition as it came from a small business with little use. with IV 68 tool is still in operation ready for demonstration Gbjdpfou S Afcsx Acwsk

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm 1 used Weinig Unicontrol 6 window system ----- Manufacturer's description: For the production of individual parts, elements, and small series. Spindle arrangement: Gbsdpfjx Tu N Hox Acwsk One cross-cutting saw, one single-sided tenoning and slotting spindle, one right-hand profiling spindle, one tenoning and slotting spindle, and profiling spindle suitable for holding multiple tools stacked on top of each other, with pneumatic spindle movement. Slotting table with motorized table movement and automatic transfer to the continuous, chainless rubber roller feed of the profiling unit. Feed height adjustment manually. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifying glass for frame or sash external dimensions. Tool positions (longitudinal and transverse machining) controlled via selector switch on the control panel. Technical Specifications ----- Crosscut Saw ----- Number of Tools: 1 Spindle Speed: 2,800 rpm Spindle Diameter: 40 mm Max. Tool Diameter: 350 mm Motor: 3 kW Mortise and Slot Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 3,500 rpm Spindle Diameter: 50 mm Tool Clamping Length: 320 mm Max. Tool Diameter: 320 mm Motor: 11 kW Profile Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 6,000 rpm Spindle Diameter: 50 mm Tool clamping length 320 mm Max. tool diameter 232 mm Motor 11 kW Special equipment: Synchronous spindle ----- Pneumatically timed forward/backward for tear-free rerouting of window sashes, frames, and doors. Spindle diameter 50 mm, 4 kW Tool clamping length 120 mm, zero tool diameter 112-140 mm Max. tool diameter 232 mm, spindle speed 6000 rpm Motor boost for synchronous spindle from 4 kW to 7.5 kW Screen control for 99 window types. One type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Production options: single parts, double parts, frame-by-frame, series, rerouting. Data entry via keyboard with integrated operator guidance and error diagnostics. 1 Grooving spindle from above ----- Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm, with 10 x 4 mm key Clamping length: 13 mm Clamping length: 40 mm Axial stroke, 2 positions Radial stroke, 2 positions Max. tool diameter: 130 mm Grooving spindle motor boost from 2.2 to 3 kW 1 Fitting milling unit, right: ----- For milling fitting grooves in the circumferential milling pass or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on the control panel. Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool cutting radius: min. 140 mm, max. 180 mm Home position below table level: 10 mm Special design of the fittings milling machine: Clamping length 150 mm Axial stroke 80 mm, 3 positions 3 tools Radial cycle, 2 positions Motor booster for the hinge milling spindle from 2.2 to 3 kW Hinge milling spindle for 230 mm tool diameters in and above the table Electric height adjustment of the feed with selector switch on the co...

Condition: used, Tenoning spindle 1 St Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 CNC - Spindles radially and axially CNC-controlled ----- The machine was factory overhauled by Weinig in 2024. The control system was also upgraded to a Siemens S 7 677 C, with a new membrane panel "Touch". With the following machining units: Crosscut saw ----- with laser alignment light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 Axially adjustable via NC axis Radial pneumatic adjustment to 8 positions for edge rounding from above Unit from below for edge rounding ----- Axially adjustable with crosscut saw Gedpfx Acexpi Dujwobk Tenon and slotting spindle ----- Motor power 15 kW Spindle diameter 50 mm Spindle speed 2,925 rpm Tool travel radius min. 380, max. 400 mm Tool clamping length 640 mm Axially adjustable CNC axis Axially adjustable travel 580 mm Adjustment speed 100 mm/sec. 1. Profile spindle (up- and down-rotation) ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis 2. Profile spindle ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis Profile milling unit horizontally mounted on top ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 9,000 rpm Pneumatically adjustable to 8 axial and radial positions Profile milling unit vertically mounted on the right side Machine end ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 5,850 rpm Pneumatic adjustment to 8 axial and radial positions Additional accessories ----- CNC-controlled length stop, mounted on the slotting table for lengths up to 3,500 mm, including a positioned cross-cutting saw integrated into the control system. Studio window device, pivots 60° on both sides Double-part package with automatic separation and transfer Synchronization device with automatic window rebating Rebating carriage for rebating small sash widths Air conditioning unit in the control cabinet PC control NEXUS Automatic turning system Slat conveyor, including conveyor belt for returning the workpieces to the operator (Technical specifications according to the manufacturer - without guarantee).