SAC RS530 thickness planer

SAC RS 530

Condition: used, Thickness planer SAC RS/530 - used - Segmented pressure beam, electric height adjustment, Hfedpfx Ahjw I T N Hs Nob under-table roller, separate feed motor ----- Technical Data ----- Planing width: 530 mm, Number of knives: 4 units, Passage height: 240 mm, Feed speed: 7 / 14 m/min, Extraction port Ø: 140 mm, Motor: 4 kW, Weight: 840 kg

Condition: good (used), Gabbiani SA 300 multi-saw - Italian production TECHNICAL SPECIFICATIONS: cutting width 300 mm engine power 40 kW cutting height 100 mm smoothly adjustable feed feed speed range 8-56 m / min blade diameter 300 mm spindle diameter 50 mm Hsdpfxshcwrko Ah Nsfb sleeve diameter 70 mm 3 upper pressure rollers minimum material length 700 mm table top dimensions 1750 x 700 mm three rows of pawls height from the base 740 mm stub diameter 2 x 150 mm dimensions (length / width / height) 270/170/160 cm

Condition: ready for operation (used), functionality: fully functional, Thickness planer SAC RS53, 4 knives Specification: • Condition – used, after inspection • Working width – 530 mm • Working height – 240 mm • Motor power – 4.0 kW • 4-knife cutterhead for traditional knives • Analog thickness indicator • 2 feed speeds • Full, straight infeed roller before the cutterhead • Two steel outfeed rollers after the cutterhead • Slip roller in the lower table • Manual height adjustment (up/down) • Table supported by a single solid piston • Original paintwork • Outlet for chip extraction, diameter 145 mm • Weight approx. 800 kg Hjdpfx Aoxdxk Teh Nefb • Overall dimensions: 95 x 100 x 105 cm (L x W x H) Additional information: • The photos shown reflect the actual condition of the item for sale • Possible to power on and test the machine on site.

Condition: good (used), Year of construction: 2001, saw band length: 4,500 mm, total height: 2,100 mm, roll diameter: 600 mm, Cutting height 300 mm Cutting width 570 mm Table size 610x700 mm Extraction 120 mm Band saw guide above and below Stop Total height of the machine approx. 2100 mm Hfedpfsvt Sxgex Ah Njb

Condition: used, mileage: 167,000 km, power: 88 kW (119.65 HP), first registration: 12/2018, fuel type: diesel, overall weight: 2,800 kg, next inspection (TÜV): 10/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 4,999 mm, total width: 1,956 mm, total height: 1,951 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), had accident, navigation system, soot filter, Special equipment: * Rear parking assistance * Wooden floor in the cargo area * Mobile office package 1 * Full wheel covers * Spare wheel with road tires * Trim in cargo/passenger area Additional equipment: * Driver's airbag * Traction control system (ASR) * Exterior mirrors electrically adjustable and heated * 85 Ah battery * On-board computer * Rev counter * Automatic headlight activation * Rear wing doors without glazing * Cabin filter: pollen filter * Body type: panel van * Fuel tank: 80 liters * Adjustable steering column (steering wheel) Hjdpsww Sgdjfx Ah Nofb * Engine: 1.6 L - 88 kW dCi diesel * Rear fog lamp * Wheelbase: 3098 mm * Low emissions according to Euro 6 standard * Sliding door right side cargo/passenger area * Seat upholstery: fabric, Seats in driver's cabin: driver's seat comfort, 3-way adjustable * Daytime running lights * Lashing rings on the side walls and on floor of cargo area * Pre-installation for body electrics * Heat-insulating glazing * New tow bar * Note: Increased oil consumption (2 l / 1000 km), vehicle is drivable but needs repair, possibly turbo. Engine smokes slightly during cold start phase, then runs clean. If you are interested in this panel van, please contact Mr. Krey Monday to Friday from 9 am to 6 pm, otherwise please send me an email and I will get back to you promptly. I speak German, English spoken, on parle français. Errors and omissions excepted.

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls Hfodpfjh Nvyzsx Ah Nsb -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg

Condition: new, Cutting range: round 0°: 170 mm square 0°: 150 x 150 mm flat 0°: 150 x 190 mm round 45°: 125 mm square 45°: 95 x 120 mm Hfedpfsilk H Tox Ah Njb working height : 870 mm cutting speeds : 40 / 80 m/min saw band: 2080 x 20 x 0,9 mm coolant pump: 100 W saw motor: 0,75 kW connection: 400 V dimensions L x W x H, approx.: 1340 x 810 x 1320 mm Weight, approx.: 146 kg Features: - Saw bow can be tilted up to 45°. - With 2 saw blade speeds for optimum adaptation to the workpiece - Ideal for cutting tubes, profile material as well as solid material made of VA, iron, etc. - Generously dimensioned saw arm for low-vibration work - Lowering of the saw arm via hydraulic lowering cylinder - Low noise level due to stable design - Switch-off after end of cut by micro limit switch - Quick-action vice for simple and fast workpiece clamping - Precise, adjustable saw blade guide for optimum cutting results - Coolant system with pump - Incl. base frame - CE/IEC, German documentation and German service Scope of delivery: - BiMetal saw band 2080 x 20 x 0.9 mm, 6/10 ZpZ - Band tension adjustable via manometer - quick clamping vice - material stop - Coolant device with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic limit stop after end of cut - underframe

Condition: good (used), Year of construction: 1990, cutting width (max.): 1,000 mm, cutting height (max.): 140 mm, table length: 1,400 mm, power: 5.5 kW (7.48 HP), Types:F 45 ,Machine nr:90-8-86 Hjdpfjtxh Nisx Ah Nefb

Year of construction: 2022, condition: new, Thickness planer KD410 Weight 205 kg Voltage: 400 V - 3 phases, power (S6) 4,4 kW / 6,6 PS chip and dust extraction diameter 100 mm Planing table dimensions 600 x 410 mm Maximum planing height 230 mm Shaft diameter 70 mm Number of knives: 3 Maximum thickness per pass: 4 mm Speed: 5500 rpm Speed 6 m / min. Hfodpfxsgx T Hho Ah Nob Accessories: - Handwheel with indicator for thickness planer - Planer cutterhead Tersa Location: Ex stock 54634 Bitburg - immediately available -

Condition: ready for operation (used), Year of construction: 1984, Press force: 3600kN, press force stroke: 1.7mm, press work capacity: 6120J. Stroke: 60mm, installation height: 340mm. Table clamping width/depth: 440mm/525mm, tool holder width/depth: 440mm/320mm. Dimensions X/Y/Z: 1300mm/2000mm/2230mm, weight: approx. 6300kg. Hfjdpfxjr A Eifj Ah Nob