Combination grinding machine

Rogi WG200S

Year of construction: 1995, condition: good (used), machine/vehicle number: 044092, Offer 22148 Gedpfeiba R Njx Ab Deit Technical data: - Grinding wheel diameter approx. 200 mm - grinding wheel width approx. 25 mm - grinding wheel bore approx. 51 mm - wheel speed 1450 rpm - drive 400 V / 0,7 kW - Space requirement approx. W 600 x H 400 x D 350 mm - Weight approx. 30 kg - Console for wall mounting

Condition: new, capacity: up to 2 000 kg/h brushes contact length: 2x2 m contact time: 5 – 50 sec. Gjdpedix E Refx Ab Djit power: 1,5 (2,0) kW (PS) electric outlet: 220V 50Hz (1 phase) fuse: 16 A plug type: F (=SCHUKO) dimensions: length: 2 670 mm width: 825 mm height: 1 400 mm weight: 350 kg fruit insertion height: 840 mm fruit discharge height: 700 mm fresh water Connection: ¾ ”

Condition: used, Year of construction: 1968, roll diameter 500 mm throat 1050 / 485 mm workpiece height 300 mm saw band length 3920 - 4050 mm cutting speed 15 - 940 m/min Gedpfx Aoiqp Erjb Deit table height 1040 mm table surface area 750 x 800 mm Table tiltable 15 Grad total power requirement 4,0 kW weight of the machine ca. 1750 kg dimensions of the machine ca. 2100 x 1000 x 2100 mm - Unique mitering range left/right up to 30° acute angle - Mitering adjustment via lockable detent every 15° - Adjustable saw blade for optimum cutting angle - Hydraulic clamping device on both sides - Electric blade breakage monitoring - Smooth-running saw carriage via preloaded recirculating ball bearings - Additional table 450 x 450 - Machine light

Condition: good (used), Year of construction: 1993, Rotor width 800 mm Gjdpsp H Sv Dofx Ab Djit 22 kw motor 20 knives on rotor 25 mm concave There is also a wooden frame to put the chipper higher so that a conveyor belt fits in below

Condition: good (used), 1 x Drill + tap machine Steinel GT.6.52 Giodpfx Abema Efye Dst Technical data: Speeds: 500/630/1000/1250 rpm power in steel: M 6 max.clamping diameter collet: 10 mm The machine can be visited under power.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, working width: 2,000 mm, bending angle (max.): 135 °, sheet thickness steel (max.): 1 mm, back gauge adjustment: manual, overall weight: 540 kg, total length: 2,400 mm, total width: 850 mm, total height: 1,175 mm, Finger setter with segmented top clamp PNEUMATIC CYLINDER !!! Gedpoga T Dpjfx Ab Dsit Including manual back stop Max. bending capacity over the entire working length ----- 1.2 mm Max. working length ----- 2000 mm Max. opening width ----- 30 mm Width of fingers ----- 38 | 38 | 50 | 50 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 mm Max. angle of attack ----- 0 - 135 Weight ----- 540 KG Width ----- 2400 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: reconditioned (used), functionality: fully functional, Locatelli Miniariete 35 Automatic Lathes Maximum material length: 1000 mm Maximum machined material length: 100 mm Automatic material feeder CE certificate Complete DTR technical documentation Giedpfxex Ar Ivo Ab Dst Main motor power: 3/4 kW

Year of construction: 2018, condition: new, max. dia. of grinding wheel 175 mm Gedpslp U Ucsfx Ab Djit boring diameter 32 mm max. width of grinding wheel 25 mm

Condition: excellent (used), Here we offer a Weiss climate test chamber. Designation: SB2/500/80 water cooled Cold-heat operation: -75°C ...+180°C Climatic operation: +10...+95°C Humidity range: 10...98 % r. h. Temperature constancy, temporally ± 0.2K Humidity constancy: ±1 r.F. Temperature rate of change: Cooling: approx. 1.4 K/min Heating up: approx. 2.5 K/min External dimensions: Height 1980 mm, width 1265 mm, depth 1365 mm Feedthroughs: left side: ∅ 100 mm right side: ∅ 50 mm The connection voltage is: 400V/3Ph+N+PE/ 50 Hz Power: 10,4 kVA Weight: approx. 720 kg Refrigerant R404a / R 23 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Type: SB2/500/80 Gedem Tvzcopfx Ab Dsit Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: new, Finger setter with segmented top clamp PNEUMATIC CYLINDER !!! Max. bending capacity over the entire working length ----- 1.5 mm Max. working length ----- 1500 mm Max. opening width ----- 48 mm Width of fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 2x 250 | 275 mm Max. angle of attack ----- 0 - 135 Gijdoga T Dlspfx Ab Djt Weight ----- 430 KG Width ----- 1820 mm Depth ----- 850 mm Height ----- 1175 mm