Bandsaw machine

Rogi CY300 INVERTER

Condition: new, ROGI SAWING MACHINE TYPE CY300N INVERTER Sawing dimensions ----- 2750 x 27 x 0.9 mm Cutting speed ----- 20~80 m/min Engine power ----- 1.5 KW ( 400V ) Weight ----- 350 kg Cutting capacity 0 255 mm 200 mm 200 x 320 mm Cutting capacity 45 195 mm 195 mm 195 x 200 mm Cutting capacity 60 125 mm 125 mm 120 x 130 mm Cutting capacity -45 200 mm 170 mm 170 x 200 mm Ledpfxega T Eus Ag Rohp INCLUDED Adjustable material clamp Angle adjustment up to 60 degrees Automatic switch off Low-noise electric motor Closed worm gear transmission Hydraulic pressure control Rotatable undercarriage 45 gr. Emergency stop Cooling pump Support box Quick Release Clamp 1 Saw blade mounted

Condition: new, Year of construction: 2025, The CORMAK HBS260 band saw for cutting pipes, profiles and bars is widely used in all locksmith workshops where precision, quality and cutting speed are important. The model is equipped with a 0-60° swiveling arm. The frame design ensures accurate and quiet operation. It has a removable filing tray for easy cleaning! Machine characteristics A horizontal metal band cutter with a swiveling arm allows cutting in a plane perpendicular to the axis of the material being cut and at any angle ranging from 0 to 60°. The material to be cut can be fed manually or with any mechanical device, and the tool feed is automatic. The tape guides are equipped with special carbide plates and bearings. This has a huge impact on the belt guidance, its life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and saw blade. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The cutter's arm made of uniform cast iron together with the 27 mm wide cutting band used in this cutter allows it to fully perform multi-series cuts of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The saw blade guides are equipped with hard metal plates - sintered carbides and a rolling bearing system. It is the CENTRED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The shape of the upper part of the base constitutes a bathtub for draining coolant and catching chips generated while cutting the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the movement of the cutting band and the falling feed of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic actuator. The feed speed is regulated on the cutter's control panel. We can choose from two cutting band speeds: 35 and 70 m/min. In the lower position of the arm (after cutting the material), the cutting belt drive is turned off automatically. Safety is ensured by the cutting band covers and micro switches that stop the engine after the cutting cycle is completed or any of the covers are opened. Additional protection consists in automatic shutdown of the cutter in the event of the cutting band breaking. Cutting band size [mm] 2520 x 27 x 0.9 Tape tension mechanical (manual) Belt speeds [m/min] 35, 70 Adjustable arm drop stepless - hydraulic actuator Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame tilt [°] 0-60 Power supply 3 phases 400V Main engine power [kW] 1.1/1.5 Cooling pump motor power [kW] 0.05 Dimensions with base [cm] 150x80x140 Weight [kg] gross/net - 210 / 180 kg *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding. Lhedpfx Agemrnk Ee Rjp The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2025, Holzkraft band saw HBS 533 S. Heavy professional design with high dead weight for maximum running smoothness especially smooth and precise running thanks to torsion-free machine housing large dimensioned cast iron saw table in one piece, tiltable from 0° to +20° with ground and polished surface patented table tilting device with hand wheel and toothed rack saw band quick clamping ceramic saw band roller guide large cast iron parallel fence fast and precise cutting height adjustment via handwheel and toothed rack with millimetre scale safety switch for automatic shut-off when opening the door large cast iron parallel fence standard with angle stop Lhedpfx Aeb S Uzkog Rep flywheels made of grey cast iron with special coating on the running surfaces Inspection window for checking the saw blade running Professional saw table guide the heavy, massive saw table made of grey table is easily and comfortably adjusted by a handwheel rack and pinion guide system the inclination is steplessly adjustable from 0° to +20°. Patented working table dimensions 750 x 530 mm cutting speed 1400 m/min. flywheel Ø 530 mm max. cutting height 350 mm max. cutting width with fence 465 mm max. cutting width without fence 510 mm band saw blade length 4190 mm precision guide top / bottom saw table inclination 0° - +45° motor power 400 V/50 Hz/P2 4,0 kW Weight 305 kg Dimensions 1000 x 720 x 2040 Suction port diameter 2 x 100 mm Location: ex stock Bitburg

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: fortlaufend, Height: 200 mm Centers: 1000 mm Turning diameter over bed: 400 mm Turning diameter over support 220 mm Spindle Bore: 52 mm Speed ​​range: 9-1600 rpm Spindle nose: Bayonet DIN 5027 KK 6 Longitudinal feeds range: 0.028 to 6.43 mm / rev (93 steps) Area cross feeds: 0.012 -2.73 mm / rev (93 steps) Lhsdpfx Ags Nh Hxs Rjp Metric threads: 0.5 - 224 (48 steps) Inch threads: 72 - 1 / 8 tpi (46 steps) Module pitch: 0.5 - 112 (42 steps) Diametral thread: 56 - 1 / 4 DP Quill diameter: 75 mm Spindle stroke: 150 mm Taper: Morse taper 5 Motor power: 7.5 kW Weight: 2100 kg Dimensions: 2672 x 975 x 1230 mm Accessories: Digital display for 3-axis mark SINO, 3-jaw chuck Ø 250 mm, 4-jaw faceplate chuck Ø 400 mm, fixed + follow rest, coolant system, fire wall, rapid, manual lubrication, 4-way tool operating light.

Condition: as good as new (ex-display), functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 58 mm, turning diameter over bed slide: 430 mm, center height: 215 mm, turning length: 760 mm, quill stroke: 127 mm, quill diameter: 58 mm, total length: 1,885 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,680 kg, quill mount: MK 4, Tip height: 215 mm Center width: 760 mm Spindle bore: 58 mm Spindle nose according to DIN 55029 Camlock D6 Motor power: 5.5 kW Spindle speed range: 20-2000 mm Weight approx. 1680 kg Equipment including Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Lodpfx Agscir Ans Rohp Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: used, turning diameter . mm Lodpfx Agoqn A Rrj Rjhp turning length . mm swing diameter over bed slide . mm

Condition: excellent (used), Year of construction: 2001, Technical data: Year of manufacture: 2001, service in 2024 Working length: 3100 mm Lsdpfx Aovy H Iisg Rohp Stand width: 2650 mm Pressing force: 300 tons CNC control: Robosoft BC55 touch graphics 2D Controlled axes: Y1 / Y2; X CNC table bending compensation Projection: 300 mm Stroke: 350 mm Motor power: 18 kW Dimensions (length x width x height): approx. 4200 x 2200 x 3700 mm Weight: approx. 19 tons Accessories: various tools The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear are in keeping with its age; used machines are sold without any warranty.

Condition: new, thread dia. M6 - M24 mm turning speeds 200 U/min radius 1200 mm angle adjustable from - to 0 - 90 Grad weight of the machine ca. 0,4 t dimensions of the machine ca. 1,4 x 0,1 x 0,7 m Ljdpfsg N Nl Djx Ag Rshp Electric tapping machine / 4450124SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head - Setting the parameters via touch display on the swivel arm - Both manual and automatic switching from forward to backward to reaching the entered Incl. 1 each GT24 M6, M8, M10, M12, M14, M16, M18, M20, M22-24 tapping chuck Substructure 900 x 600 x 875 mm

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 32 [mm] - Max. machining length : 320 [mm] - Spindle speeds : 8.000 [rpm] - Spindle power : 3.7 / 5.5 [kW] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Max. bar diameter : 32 [mm] - Spindle speeds : 8.000 [rpm] - Spindle power : 2.2 / 3.7 [kW] - C axis indexing precision : 0,001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 9 - Number of motorized positions : 4 - Live tools speed : 6.000 (T01-T02-T03) / 4000 (T04) [rpm] - Live tools power : 1 [kW] - X/Y stroke : 142 / 348 [mm] GUIDE BUSH HOLDER 2 - Number of positions : 3 GUIDE BUSH HOLDER WITH AXIS B - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 5.000 [rpm] - Live tools power : 1 [kW] - Stroke axis B : 0 - 135 [°] SECONDARY OPERATION - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 6.000 [rpm] - Live tools power : 1 [kW] END ATTACHMENT - Number of positions : 2 - Number of motorized positions : 2 - Live tools speed : 8000 [rpm] - Live tools power : 1 [kW] POWER SUPPLY - Total installed power : 21 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.150 x 1.280 [mm] - Machine height : 2.010 [mm] - Machine weight : 3.600 [kg] MACHINE HOURS - Number of hours under power : 37855 [h] Lsdpfx Aswdalnjg Rehp - Number of working hours : 9578 [h] EQUIPMENT - CNC : Fanuc 31i-B5 - Interface : RS232 / PCMCIA / RJ45 / USB - Rotating guide bush - Parts catcher - Ejection of workpiece - Parts conveying strip - Chips conveyor - Coolant tank : MULLER COMBILOOP CL2 * with high-pressure pump : 100 [bars] - Bar loader : IEMCA BOSS 338 HD / 32 LL - Electric transformer

Condition: new, Experience unparalleled precision and performance with the surface grinding machines from PERFECT. Now even supported by BAFA! Our machines offer grinding lengths from 500mm to 4000mm and grinding widths from 150-1000mm available, also available as controlled variants. Partially available from stock! Discover our extensive range of special accessories that make your surface grinding machine even more versatile. Whether for complex workpieces or demanding tasks, our machines always deliver the best results for you. Trust in our many years of experience and let us optimize your machining processes together. Invest in quality and precision - contact us today! Our selection of conventional or controlled machines (further models available on request): Model FSM 2550 FSM 3060 FSM 4080 Grinding Length 500 mm 600 mm 800 mm Grinding Width 250 mm 300 mm 400 mm Distance Table Surface/Spindle Center 500 (Option 600) mm 500 (Option 600) mm 550 (Option 650) mm Table Size 250×500 mm 300×600 mm 400×800 mm Ledpfxsdzk T Rs Ag Rehp Max. Table Load 250 kg 300 kg 400 kg Model FS-NC-50AHR FS-NC-60AHR FS-NC-70AHR Grinding Length 1020/1520/2020 mm Grinding Width 500 mm 600 mm 700 mm Distance Spindle Center to Table 600 (Option 800, 1000) mm Table Clamping Surface 500×1000/500×1500/500×2000 mm 600×1000/600×1500/600×2000 mm 700×1000/700×1500/700×2000 mm Table Load 800/1000/1000 kg 1200/1400/1400 kg 1500/1700/1700 kg ACCESSORIES: Grinding wheel, Grinding wheel flange, Grinding wheel dresser, Grinding wheel puller, Assembly elements, Machine tool, Balancing mandrel, Machine light, Hydraulic unit with cooling fan, Technical documentation in German, CE design CURRENT STOCK MACHINES (see pictures): New machines with grinding area 250x500mm, 300x600mm, 400x800mm, 700 x 1520mm Overhauled machines with grinding area 250x500mm, 300x600mm, 400x800mm Furthermore, we have access to various used machines with large grinding areas. Contact us! For more technical data, description, and accessories, please refer to the PDF file below. By the way, in addition to inexpensive new machines and tested used ones, you can expect even more from us: • Consultation and solutions at your location • Organization of the transport of your machine to your factory • Installation, assembly, commissioning, and ready-to-use handover, and more.