Vibratory bowl feeder / sorting device / bowl feeder / vibratory feeder, vibratory bowl, sorting dev

RNA Rhein-Nadel Automation SRC-N 250-2L

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Kdedpfx Ajuzn Nnea Ejp Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: used, Year of construction: 2002, Machining dimensions (tool diameter 25mm): X=3015 mm Y=1483 mm Z=325 mm Max. travels: X=3268 mm Y=1483 mm Z=325 mm Max. programming speed: X/Y = 75 m/min / Z = 30m/min Tool holder HSK 63F Drilling unit 7964, 14 vertical drilling spindles with 32 mm grid (10 in x / 4 in y) Sawing unit 7946 3.6 kW, 90° pneumatically pivotable Milling unit 7933 9 kW Wood Her Vector axis (C-axis) Tool magazine (6 disk places) Hand control unit Laser device (positioning of the suction cups) PC control panel with 17" monitor Operating system Windows 2000 Software: TwinCAM32 - office version Vacuum pump 100 m³/h Dry running Selective safety mats (3-field division) Storage location: Nattheim Kjdpjvvi Nbefx Aa Eodp

Condition: used, Vibratory bowl feeder / Sorting device / Bowl feeder / Vibratory feeder RNA Vibratory bowl, sorting device / Screw feeding system with vibratory feeder for screw technology Ksdpfxey N Dvbe Aa Ejdp Feeding system, feeder device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Year of manufacture: approx. 2000 Bowl diameter (bottom): 300 mm Bowl diameter (top): 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6,000 rpm Power supply: 230 Volt, 50 Hz - The feeder was used for feeding automotive blade fuses Installation space required Ø x H: 420 x 390 mm Weight: 52 kg Good condition A bowl feeder always consists of two essential components. 1) Sorting bowl, in which the parts are oriented 2) Drive unit, which causes the sorting bowl to vibrate by mechanical oscillations, setting the parts in motion.

Condition: used, Vibratory Bowl Feeder / Sorting Unit / Spiral Feeder / Vibratory Conveyor RNA Vibratory bowl, sorting device / screw feeding unit with vibratory feeder for screwdriving applications Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-N 250-2L Serial No.: Year of manufacture: approx. 2000 Bowl diameter (bottom): 300 mm Bowl diameter (top): 350 mm Bowl internal height: approx. 25 mm Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Oscillation frequency: 100 Hz / 6000 rpm Power supply: 230 V, 50 Hz - RNA control unit, type ESG 90, for adjustable vibration speed - The feeder was used for feeding automotive blade fuses Space requirement Ø x H: 420 x 390 mm Weight: 52 kg Kjdpfsux Shvsx Aa Eodp In good condition A bowl feeder always consists of two main components. 1) Sorting bowl, which aligns the parts 2) Drive unit, which generates vibrations in the bowl via mechanical oscillation and thereby moves the parts.

Condition: used, Year of construction: 2005, - Fagor 8055 CNC control - Additional tank for internal spindle cooling (15 bar) 400 liters - Year of construction 2005 Technical data: - Travel X/Y/Z: 610 / 455 / 520 mm - Rapid traverse: 24 m/min Kedpfx Aajtvf Htj Esdp - Working spindle speed: 8000 rpm - Tool holder: BT40 - Table size: 762 x 363 mm - Maximum table load: 350 kg - Motor power: 18 kW - Operating voltage: 400 V - Weight: 3140 kg

Condition: used, table length 400 mm table width 300 mm x-travel 300 mm Kodpfxsvwgq So Aa Eedp y-travel 250 mm z-travel 250 mm weight of the machine ca. 1,2 t dimensions of the machine ca. 2000 x 1200 x 2500 mm The machine is supplied with a wide range of accessories

Condition: good (used), Year of construction: 2003, operating hours: 106,864 h, clamping force: 1,300 kN, screw diameter: 35 mm, The machine was very well looked after, service and maintenance were always carried out on time. Good condition, fully functional Still in use until week 11 Kjdsrp Dyropfx Aa Ejdp Further service reports and documents available Technical data: YEAR OF MANUFACTURE: 2003 Automatic operation: 106,864 h Clamping force: 1300 kN Screw diameter: 35 mm Screw stroke: 180 mm Closing force: 50 kN Opening stroke: 500 mm distance between ejector plates: 750 mm Ejector force: 40 kN Advance package - VE561/20 LGS Position-regulated screw with control valve on the injection unit for particularly high dynamics and reproducibility of the injection process, the back pressure is regulated, the nozzle contact force is manually adjustable - VE 557/00 AES Energy-saving system for automatic performance optimization and corresponding energy energy saving through infinitely variable adjustment of the pump drive speed to the respective power requirement of the spraying cycle - VE 460/00 ED Electromechanical metering drive via a speed-controlled three-phase asynchronous motor to increase productivity through simultaneous movement, through gentler material preparation and corresponding energy savings compared to hydraulic dosing On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2011, *The video is just an example of how this cell can be prepared. Grinding cell with Kuka KR 180 grinding robot Berger grinding cell 2012 (external grinding A1) - Total weight approx. 6300 kg - Cell dimensions: approx. 4650 x 2400 x 3100 mm 6-axis robot Kuka KR 180 R2500 Extra Kodpfx Aasg Saqve Eodp - Year of manufacture 2011 - KRC 4 controller - Additional axis (7th axis) BSS10 belt grinding station - Max. belt dimensions 3500 x 30 mm - Max. contact wheel diameter 200 mm - Motor power 4 kW 2 x polishing stations - Polishing wheel diameter 350 - 600 mm - Power 5.5 kW Tool changer cabinet Interoll Automation GmbH belt conveyor - Total length approx. 2000 mm - Belt width approx. 440 mm We have 4 such cells.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10564 Manufacturer: TOYODA Type: FH 630 SX Year of construction: 2008 Type of control: CNC-Steuerung Control: Fanuc 31i - A Storage location: Halberstadt Country of origin: Japan Serial no.: NS2XXX X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 850 mm B-Axis: 360 ° Max. Workpiece Weight: 800 kg Max. Tool Weight: 27 kg Max. Tool Length: 545 mm Max. Tool Diameter: Ø 120 mm Max. Size Of Workpiece Lxwxh: Ø 1000 x 1000 mm Tool Taper: BT - 50 Kdsdpfx Aoxvw Izea Eep Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 6000 RPM Machine length: 7000 mm Machine width: 3500 mm Weight Of The Machine Ca.: 20,1 t Further information: - Equipped with IKZ and chip conveyor - NC rotary table 360,000 * 0.001° Machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 2000, High-performance CNC vertical machining center with SIEMENS 840 D, dual pallet changer, internal coolant system, linear guides, and 30-tool automatic tool changer. Table size: 2 x 1000 x 450 mm Tool holder DIN 69871: ISO 40 Travel ranges: X-axis: 1100 mm Y-axis: 500 mm Z-axis: 640 mm Spindle speed range: 50 – 10,000 rpm Table load: 600 kg Feed rate range, X/Y/Z, stepless: -10,000 mm/min Rapid traverse in all axes: 30 m/min Drive power: 18.5 kW Machine dimensions L x W x H: approx. 3605 x 3041 x 3220 mm Weight: approx. 6700 kg Accessories / Special features: • CNC control system SIEMENS 840 D • Dual pallet changer • 30-tool automatic tool changer • Full enclosure with safety doors, electrically secured • High spindle speed up to 10,000 rpm and drive power of 18.5 kW • Linear guides with double roller recirculating bearing, allowing high torques to be absorbed evenly in all directions • Ball screws in all 3 axes • The entire machine bed is made of Meehanite cast iron, ensuring precision, rigidity, and vibration damping • Tool holder DIN 69871, ISO 40 • Chip conveyor with integrated coolant system • 4th axis pre-configured • CE compliant Kdjdpod I R E Njfx Aa Eep Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel