Decrowner

Rink

Year of construction: 2001, condition: ready for operation (used), A case unscrewer/case uncorker Rink is available. Unscrewing heads: 4, uncorking heads: 2, container configuration: 20x0.5l NRW. Machine dimensions X/Y/Z: approx. 2900mm/1300mm/2000mm, control system: Siemens Simatic S7. Documentation available. An on-site inspection is possible. Itedjxxzihepfx Abnsk

Condition: used, Year of construction: 1998, Overview This Krones Sensometic beer filling system was manufactured in 1998 and was previously installed in a high-capacity beverage bottling line. The machine is designed for the isobaric filling of beer and is equipped with 77 filling valves, enabling high-throughput production. The filler is configured as a filling and capping block and includes two capping units: one for screw caps and one for crown cork closures. Both capping systems are equipped with 12 capping heads, and the closure sorting systems are integrated on the machine. With a designed line capacity of approximately 33,000 bottles per hour, the machine is suitable for large-scale returnable glass bottling operations. The system supports a wide range of bottle formats typically used in the beer industry. Technical Data Manufacturer: Krones Series: Sensometic Model: VPVI 77-103 / KK11 / SV11 Machine type: Isobaric beer filling machine with integrated capping systems Year of manufacture: 1998 Filling valves: 77 Capacity: approx. 33,000 bottles per hour Capping systems: - Screw capper – 11 heads - Crown cork capper – 11 heads Isdpfsytqzwox Abnstk Closure handling: - Integrated closure sorting systems on the machine Bottle Formats: - 0.25 L Individual bottle – Ø 57.5 × 215 mm - 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm - 0.33 L Ale bottle – Ø 68.5 × 234.5 mm - 0.5 L Ale bottle – Ø 68.5 × 270 mm - 0.5 L Steinie bottle – Ø 70.5 × 174 mm - 0.5 L Bavaria bottle – Ø 70 × 260 mm - 0.5 L NRW bottle – Ø 67 × 260 mm - 0.5 L Individual bottle – Ø 82 × 295 mm - 0.7 L GDB bottle – Ø 79 × 290 mm - 0.75 L GDB bottle – Ø 79 × 290 mm - 1.0 L GDB bottle (light) – Ø 84 × 305 mm - 1.0 L AMG bottle – Ø 83.7 × 298 mm Condition: Used Availability: On request

Condition: used, Year of construction: 2020, Overview This RINK automatic screw cap remover (unscrewer) was manufactured in 2020 and is designed for the automatic removal of screw caps from returnable glass bottles before the containers enter the bottle washing process. The machine was installed in a high-capacity returnable glass bottling line with a capacity of approximately 2,000 crates per hour. Systems of this type are typically positioned upstream of the bottle washer to ensure that bottles enter the cleaning process without closures. The machine is configured for 0.75 L GDB bottles in 12-bottle crates and includes format equipment for different crate variants. The system operates with cross-flow crate transport and a crate infeed direction from left to right. The installation includes a cap discharge system and blower unit for removing closures from the bottles. The machine was built with modern electrical components and is supplied with technical documentation. Technical Data Manufacturer: RINK Machine type: Automatic screw cap remover (unscrewer) Model: KM 790 / 4K-3K QL Year of manufacture: 2020 Capacity: approx. 2,000 crates per hour Application: Automatic removal of screw caps from returnable bottles before bottle washing Bottle format: - 0.75 L GDB bottle (height approx. 295 mm) Itjdpfoytphcjx Abnsk Crate formats: - 12-bottle Pool N2 crate (400 × 266 × 333 mm) - 12-bottle individual crate (395 × 295 × 355 mm) Crate transport: - Cross-flow crate transport - Infeed direction: left → right Transport height: approx. 700 mm (max. 750 mm adjustable) Dimensions: - Length: 2,700 mm - Width: 1,400 mm - Height: 2,950 mm Weight: approx. 3,000 kg Electrical equipment: - Danfoss frequency converter - Standard electrical configuration Additional equipment: - Cap transport system - Blower unit - Technical documentation available Condition: Used Availability: On request

Condition: used, Year of construction: 2002, Overview This KM 790/5K crate decapper was manufactured by Rink in 2002. The machine can be inspected at any time and is immediately available.  Technical details - Output: approx. 2,800 crates/h (6K), approx. 2,040 crates/h (4K) - Format parts: - 5x centering plates for 0.7l GDB - 5x centering plates for 0.75 Gastro - 3x centering plates for 0.5l GDB/0.5l Euro - Crate conveyor speed: 0.6 m/s - Crate guide: All crates are moved lengthwise through the machine - Noise level: 83 dB(A) - Space requirement (LxW): 4,100 x 1,260 mm - Working area: min. 1,500 mm on the operating side Ijdpfx Asw Nk E Ijbnotk - Hydraulics: Working pressure 150 bar, residual pressure 35 bar - Pneumatics: Air consumption approx. 5.2 m³/h at 5 bar; operating pressure min. 5 bar, max. 10 bar; connection size ½" - Electrical: Operating voltage 230/400 V; control voltage 24 V; power 12.0 kVA; frequency 50 Hz; fuse protection 3 x 25 A min.; supply line min. 2.5 - Control: PLC control Siemens S7-300, HMI Simatic OP7

Condition: used, Year of construction: 1993, Palletization including pallet loader and unloader, pallet magazine, banding machine, pallet labeling Ijdpfx Ajw Uc A Aobnstk Capacity: 150 Pallet/h Features: Pallet loader and unloader: Nagema PA; Year of construction: 1993; Capacity: 1700 crates/h; Dimensions: Length: 3 m, width: 2 m, height: 3 m Weight: 1.6 tons Banding machine:Athena Roboband 2VH; Year of construction: 2004Capacity: 150 pallets/h; Pallet dimensions: 1.2 m x 0.8 m; Logopac Logomatic 915/T; Year of construction: 2014; Capacity: 150 pallets/h

Condition: used, Year of construction: 2016, Overview The crate decapping machine was complete renewed in 2016 by the company Hormes. The machine was previously used in a German company. Tech Specs: Iodpfx Aewigy Nebnjtk - Capacity: app. 2.800 crates/h - Formats: - 0,7 l GDB in 12er crates - 0,5 l GDB in 12er crates - Crate dimension: - 356 x 275 x 257 mm (0,5 l GDB) - 356 x 275 x 346 mm (0,7 l GDB) - Electrical control - Siemens S7 control - Caps - For the decapping of aluminium and plastic caps, 28 mm

Condition: used, Year of construction: 2012, Overview This RINK KM 690/4K empty bottle unscrewing machine, manufactured in , is designed for the automatic removal of screw caps from returnable empty bottles directly inside the crate. The machine is installed in the empty bottle infeed section and removes screw closures before the bottles are transported further towards the bottle washer. The machine is equipped with 4 units, each with 4 x 3 unscrewing heads, allowing multiple bottles to be processed in parallel inside the crate. In operation, the crates are transported continuously under the unscrewing sections. The head units lower cyclically onto the bottles, unscrew the closures and then return to the upper home position. The machine is operated via a Siemens SIMATIC Panel touch display integrated into the stainless steel control cabinet. Technical Data - Manufacturer: RINK GmbH & Co. KG - Machine Type: Empty bottle unscrewing machine - Model / Type: KM 690/4K - Year of Manufacture: Application: Unscrewing / removal of screw caps from returnable empty bottles inside crates - Equipment: 4 units, each with 4 x 3 unscrewing heads Itsdjzcgppjpfx Abnok - Operation: Automatic crate transport under cyclic lowering unscrewing units - HMI / Control: Siemens SIMATIC Panel touch display - Signal Tower: Red / orange / green status light - Safety: Stainless steel enclosure with transparent sliding doors and safety warning labels - Electrical Supply: 230 / 400 V, 50 Hz - Connected Load: 18 kVA - Current: 25 A - Condition: Used, installed in industrial returnable bottle line

Condition: ready for operation (used), Year of construction: 1996, A palletizing and depalletizing system Otto Fleischer (Flema) for crates is available. Pallet types: NRW pallet/Euro pallet/beer pallet, palletizing capacity: 500crates/h, beer pallet dimensions X/Y: 1200mm/1000mm, operating pressure: 4bar. Documentation available. On-site inspection is possible. Isdpfoyhgm Ssx Abnetk

Condition: used, Year of construction: 2001, Uncorker Manufacturer: Rink Model: KM 670/2K Year of manufacture: 2001 Additional title: cycled uncorker Capacity: 30000 Bottles/h Power: 6,5 kW Current: 10 A Voltage: 230/400 V Frequency: 50 Hz Length: 2800 mm Width: 1000 mm Height: 2300 mm Formats: 0.33 l bottles, 0.35 l bottles, 0.5 l bottles, module box Running direction: from left to right Operation / Control: Simatic S5 Position: free standing Ijdpfx Aow Ta D Ujbnetk Base construction: Square frame construction painted on dome feet Features: Crate transport, format sets/corker heads for 2x20 bottles and 2x24 bottles, housing with doors, protective grille, control cabinet with operating front, various spare parts Layer patterns: 2x20 bottles, 2x24 bottles

Condition: used, Year of construction: 2017, Descrewer / Decorker, make Rink, type: KM 740/2K, as crate-descrewer/-decorker, 2-head for screw cap 0,5 lt NRW in 20-bottle module crate, and 1 head for crown cap, built 2017 Isdpey Iz Aiefx Abnstk

Condition: used, Year of construction: 2004, Overview This complete filling line for returnable glass bottles was manufactured between 1993 and 2004 by several well-known European producers, mainly Klann, Klinger, Krones, Nate, and Datz. The line is designed for high-capacity beverage production, handling up to 20,000 bottles per hour in different formats.  It includes all components from decrater to crater. The line is for it´s age in a good condition. The labelling machine was maintained in 2023 completely. It remains installed and connected and can be inspected upon request. Technical Data - Capacity: up to 20,000 bph - Bottle Formats: 0.25 L Vichy, 0.5 L Set 1–3, 0.7 L GDB, 0.75 L GDB - Application: Water, CSD, or other beverages in returnable glass bottles - Condition: Line in good condition - Availability: Immediate - Status: Still installed and connected   Scope of Delivery Decrater | Otto Fleischer | 1993 Crate washer | Klann | 2,000 crates/hour | 1997 | GDB crates, stainless steel Itjdpfxsyb R Uaj Abnjk Bottle washer | Klinger | 1993 | Stainless steel, multi-zone, steam extraction, dosing system Empty bottle inspector | Krones | up to 50,000 bottles/hour | 2004 | Linatronic system Filler | Nate-Veral 60 | 20,000 bottles/hour | 2004 | glass bottles, without closer Capper | Datz | 20,000 bottles/hour | 2004 | 8-head Solo SV, left–right working direction Swing-top capper | Datz | 20,000 bottles/hour | 2004 | 24-head BVM-24R, swing-top closure Labeller | Krones | up to 20,000 bottles/hour | 2004 | Prontomatic, 2 stations, Checkmat inspection Crater | Otto Fleischer | 1993 | ROTA 1 E, automatic case packer

Year of construction: 2026, condition: new, Continuous pasteurizer electric - up to 400 ltr./h Itedpfx Aot Uzitebnok * Water bath boiler * Electric heating 13.5 / 18 / 27 / 31.5 kW - 400 V * Container (stainless steel) 150 ltr. with thermal insulation * Stainless steel tubular heat exchanger * Automatic low temperature safety device (compressed air required) * Stainless steel juice pump * Chassis with holder for low temperature safety device and pump ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Year of construction: 2026, condition: new, Coaxial tubular heat exchanger for connection to an existing heating system / heat source Itsdpjt Uzhcjfx Abnek * Coaxial tubular heat exchanger (KRWT) with thermal insulation * Automatic low temperature protection * Stainless steel juice pump * Chassis Advantages: * Low maintenance * Suitable for media containing turbid matter * Simple, quick cleaning * Durable thanks to the use of high-quality and robust components Optional: Mixing unit incl. circulation pump for a stable inlet temperature of the heating water ##### RINK - Pasteurizing systems for more than 30 years Proven technology - more than 500 units in customer use

Year of construction: 2026, condition: new, Continuous pasteurizer electric with preheating of the juice in the coaxial tube heat exchanger They use available low-cost energy (e.g. from solar, heat pump, biogas, tec.) although the temperature level is not sufficient for pasteurization. The rest of the temperature increase to pasteurization level is done electrically (with less energy requirement). The components: Preheating: * Coaxial tubular heat exchanger (KRWT) with thermal insulation (max. 60kW) thermal * Mixing unit incl. circulation pump ensures a stable inlet temperature of the heating water Isdouadm Djpfx Abnstk Continuous pasteurizer electric: * Electric heater 13.5 / 18 / 27 / 31.5 kW - 400 V * Tank (stainless steel) 150 ltr. with thermal insulation with stainless steel tubular heat exchanger * Automatic low temperature safety device (compressed air required) * Stainless steel juice pump Pasteurizer mounted on chassis Simple operation Total capacity up to 1100 liters per hour ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use