Chiller

RegloChill RC2E 20

Year of construction: 2003, condition: reconditioned (used), Stock - No. 2651 1 used underwater pelletizing unit, partially overhauled in 2023 Throughput up to approx. 450 kg/h depending on the material, consisting of: Type BKG ( Nordson ) Start-up valve with hydraulic station Granulator type A300 including die-plate and cutter bar, drive 4.4 kW by-pass system TVE 1000 ED pellet-dryer drive 4 kW incl. Agglomerate catcher Tempered water system with Water box 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15³/h heat exchanger Control unit - NEW Further UWP pelletizing units are available ex workshop in Wuppertal-Germany ( as Gala, BKG Nordson, Econ ) Available from the Wuppertal warehouse: complete compounding, pelletizing extrusion lines, Bwjdpfoiyyf Ijx Ak Eol with single-screw or twin-screw extruder.

Condition: good (used), functionality: fully functional, total length: 2,750 mm, total width: 2,800 mm, total height: 1,830 mm, space requirement length: 2,800 mm, space requirement width: 2,850 mm, space requirement height: 1,900 mm, motor manufacturer: Bitzer, volume flow: 940 m³/h, Two used Bitzer screw compressor skids for low-temperature applications on Freon. Both skids are supplied with a shared control panel. Originally, each skid served its own cold storage room, but the capacities listed in the specifications are combined. Skid 1 is equipped with two Bitzer HSN 7461-70-40P semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger used as an economizer, a brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 440 m³/h at 50 Hz and 532 m³/h at 60 Hz. Bwedpfx Ajx Ap Hpek Eol Skid 2 comes with two Bitzer HSN 7471-75 semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger used as an economizer, a WTT GmbH WP 7M-44 brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 500 m³/h at 50 Hz and 600 m³/h at 60 Hz. Bitzer HSN 7461-70-40P (x2) capacities: -20ºC/+40ºC: 229.6 kW -30ºC/+40ºC: 157.4 kW -40ºC/+40ºC: 102.0 kW -45ºC/+40ºC: 79.8 kW Bitzer HSN 7471-75 (x2) capacities: -20ºC/+40ºC: 240.6 kW -30ºC/+40ºC: 165.8 kW -40ºC/+40ºC: 109.0 kW -45ºC/+40ºC: 86.0 kW

Condition: new, Year of construction: 2024, functionality: fully functional, Multiple load banks are directly available from stock. Contact us today if you want to rent, lease, or buy a load bank. - Load bank 100 kW, 400Vac 50Hz, CosPhi 1 (Very compact, easy to carry in a service van) - Load bank 300 kW, 400Vac 50Hz, CosPhi 1 - Load bank 500 kW, 400Vac 50Hz, CosPhi 1 - Load bank 600 kW, 400Vac 50Hz, CosPhi 1 - Load bank 700 kW, 400Vac 50Hz, CosPhi 1 - Load bank 1000 kW, 400Vac 50Hz, CosPhi 1 - DC load bank with different voltages and capacities in stock, for example, 500VDC and 1000VDC, 1000 kW. Bodjr Eyycjpfx Ak Eswl If you are looking for a solution to test at different voltages, such as 440V, 690V, or medium voltages like 10kV, do not hesitate to contact us. We also offer solutions for load banks with a variable power factor (CosPhi) and load banks with a power factor of 0,8 (load bank with a CosPhi 0,8). For example, we have inductive load banks, which we could combine with resistive and load banks, including both. Most of our load banks are equipped with a switch where you can choose between internal and external power for the fans. We offer both stationary and mobile load banks. For mobile purposes, we can add forklift pockets and a robust bracket. We are looking forward to your request.

Condition: used, System: used piston diaphragm pump / pump Type: HMD-G-50-500 Flow rate: 40.0 m3/h Pressure: 1,6 MPa Bwedpfx Asdkdi Tek Eol

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, 1 used steam boiler ----- - mounted on frame - Manufacturer: Bay Kessel - BBS Germany Type: HDK 7000 Capacity approx.: 7,000 kg/h Bjdpox A Dplefx Ak Ejwl Operating overpressure: 10.0 bar Increased test pressure: 18.5 bar Max. steam temperature: 184.6 °C Water content full approx.: 17,500 l Year of manufacture: 2017 CE marking: CE 0036 Equipped with Weishaupt gas/oil burner WM-GL50/1-A, version ZM-R-NR, gas control line, separate control cabinet, feed water pump, Eco, and existing coarse and fine fittings.

Condition: excellent (used), Drilling capacity -20 mm Spindle taper FEHLMANN Spindle speeds 50-6300 rpm Throat 276 mm Cross table 530 x 255 mm Digital read-out Bodpfxjuy Sazj Ak Eswl Accessories MARCELS MASCHINEN CH

Year of construction: 2001, condition: excellent (used), Single screw extruder WEBER NE5 1-30:D with 2 co-extr. WEBER ZE30 Year of construction 2001 Screw diameter 50 mm Application:PE-PP, Three-layer pipes or pipes with colored stripes The plant has manufactured heating pipes Condition: very good 2 Co-Extruders WEBER ZE30 Bjdohy Tp Djpfx Ak Ejwl Screw diameter 30mm The three-layer pipe system is my property Location: Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn/Grabstede, Germany

Condition: good (used), Year of construction: 1988, operating hours: 9,999 h, functionality: unexamined, overall weight: 3,500 kg, fuel type: diesel, color: blue, output voltage: 400 V, output frequency: 50 Hz, nominal power: 360 kW (489.46 HP), nominal power (apparent): 450 kVA, total length: 3,200 mm, total width: 1,340 mm, total height: 1,800 mm, rotational speed (max.): 1,500 rpm, type of cooling: water, Brand: Mercedes Benz - Stamford Model: 450 kVA diesel generator Year of manufacture: 1988 Serial number: On request Operating hours (read): Unknown Capacity (kVA): 450 Capacity (kW): 360 Engine brand: Mercedes Benz Engine model: OM444A Fuel: Diesel Alternator brand: Stamford Bwedpfoydk Dgox Ak Ejl Alternator model: HC534C Voltage: 220 - 380 V Frequency (Hz): 50 RPM: 1500 Amperes (A): 684 Dimensions LxWxH (mm): 3200 x 1340 x 1800 Weight (kg) approx.: 3500 Units in stock: 1 Manufactured in: Germany Comments: Really good visual condition, operating hours unknown, twin turbo.

Condition: good (used), Year of construction: 2000, operating hours: 53,776 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 380 mm, rotary table diameter: 500 mm, rotational speed (max.): 18,000 rpm, For sale is a 5-axis simultaneous milling machine from Deckel Maho, model DMU 50 eVolution. The machine is in good condition and ready for immediate use. Technical Data: Year of manufacture: 2000 Control: MillPlus Power-on hours: 53,776 h Spindle hours: 18,512 h Bedpewxd Agofx Ak Ejwl X-axis: 500 mm Y-axis: 400 mm Z-axis: 380 mm B-axis: 0-180° C-axis: 360° Clamping surface: Ø 500 mm Max. table load: 200 kg Spindle taper: SK40 Max. speed: 18,000 rpm Spindle power: approx. 15 kW Tool magazine: 60 slots Dimensions: approx. 3,400 x 2,400 x 2,500 mm Weight: 5,500 kg Transport and loading can be arranged Europe-wide at an additional cost upon request. Prices are subject to VAT. Viewing possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell your equipment? For further information or contact options, please visit our website.

Condition: ready for operation (used), Year of construction: 2015, - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER and LOADING/UNLOADING SYSTEM X-AXIS TRAVEL: 4000 mm Y-AXIS TRAVEL: 2000 mm Z-AXIS TRAVEL: 115 mm RAPID FEEDS X-Y-Z: 245 m/min WORKING AREA: 4000 x 2000 mm ADMITTED LOAD ON TABLE: 1250 Kg SOURCE: TRUDISK 5001 ; 5000 W Bwsdsxqtx Sjpfx Ak Eel WEIGHT: 15000 Kg OVERALL DIMENSIONS: 10900 x 5700 x 2400 mm NOTE: LIFT MASTER COMPACT LOADING/UNLOADING SYSTEM