Filling Machine

Rationator Robomat L2 2500/10 Twin-Color

Condition: good (used), Year of construction: 2004, functionality: fully functional, Manufacturer: HABERMEHL Anlagenbau GmbH Address: Hauptstr.1, 35510 Butzbach-Ebersgöns, Germany Type: EH 400/1 Bdsdpow Niuhsfx Aa Djb Serial number: 901 Year of manufacture: 2004 Voltage / Frequency: 400 V / 50 Hz Rated power: 3 kW CE-certified: Yes 🛠️ Device Description Industrial shredder or crusher (Shredder/Granulator). Notable features visible in the photos: - System with rotating knives (shredding unit) on a 2 mm shaft - 3 kW SEW motor and reduction gearbox - 8 mm screen (the screen is labeled “8 mm Sieb”) – determines the output particle size - Rollable, portable design - Material discharge container and lower motor drive system Machines of this type are typically used for shredding the following materials: - Plastics - Rubber - Wood - Light metal chips - Electronic scrap 📝 Technical information you should request If you require further details, you may request the following information from the supplier or manufacturer:

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Schubert TLM-F2 / F44 Packaging system for bottles and folding boxes in cartons with subsequent palletising. Bdjdpfx Ask Ttykja Dob Fully automised packing system. Pick a bottle and place in box. Place a box on pallet. Acceptance of bottles and folding boxes - Pre-grouping of bottles or folding boxes - Erecting cartons from flat blanks using hot glue - Filling the pre-grouped products into the erected boxes - Closing the filled boxes with hot glue - Weighing and labeling of the sealed boxes - Palletizing the boxes

Condition: ready for operation (used), Year of construction: 1993, power: 30 kW (40.79 HP), Shredder Manufacturer: Piranha Bdodpfsyh Narox Aa Dob For plastics and cables Motor: 37 kW Shaft length: 600 mm With 3 x 5 pcs. cutting knives With 40 mm screen With control unit Dimensions (L/W/H): 2.5 x 2.5 x 2.6 m Weight approx. 4.5 t

Condition: new, Year of construction: 2025, Fully automatic labeller for bottles, cans, containers. PLC control, operation via touch monitor. Variable speed motors and conveyor chain board. - Specifications: label length: 6-260mm; label width (backing paper width): 10-150mm; bottle diameter25-130mm; inner diameter of the label roll: 76mm; max. outer diameter of the label roll: 300mm; label precision: ± 1mm; production capacity: max. speed of the machine in neutral: 40 cycles/minute; power: 220V, 50Hz/60Hz. Bdedpfx Ajv Nk Sdja Dsb Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: like new (used), Year of construction: 2016, functionality: fully functional, total height: 11,000 mm, total width: 2,350 mm, total length: 11,395 mm, load capacity per storage section: 35 kg, load capacity: 49,560 kg, For SALE 6 pieces!!! KARDEX Vertical Buffer Module LR35® Bdjdpfx Aaowqp Npe Djb Machine Type: LR-35-19x400x600x11000 Machine height: 11,000 mm Required installation height: 11,050 mm Machine length: 11,395 mm Machine width: 2350 mm Storage segments: 19 pieces Bin width: 400 mm Bin depth: 600 mm Max. load (calculated per Bin): 35 kg Machine surface (without "turntable"): 23.49 m² Machine surface (incl. "turntable"): 26.77 m² Permitted total weight: 59,492 kg Permitted total load: 49,560 kg Empty weight (without Bins): 11,415 kg Speed x-axis: max. 3 m/s Speed y-axis: max. 3 m/s Safety intermediate distance: 60 mm Storage grid 25 mm Permitted ambient temperature in operation: +5° - +40° Permitted relative humidity: 85% Year of Build: 2016 Machinehandel De Leeuw BV is one of the few companies in Europe that trades and has in stock mainly used Kardex Remstar VLM automatic Lift (Shuttle systems) & rotating warehouse systems (paternoster systems). See our website for the current stock. We assemble and/or disassemble these systems in a safe manner with VCA certified technicians and we have been doing this for more than 33 years. We also disassemble other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Machinehandel De Leeuw BV Oordeelsestraat 7–b 5111 PA Baarle-Nassau TheNetherlands Email: info at deleeuw-machinehandel.nl

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 612334X00379, Year of construction: 2020, operating hours: 2,810 h, load capacity: 750 kg, lifting height: 10,610 mm, fuel type: electric, construction height: 4,400 mm, battery capacity: 930 Ah, battery voltage: 80 V, fork length: 1,250 mm, overall weight: 8,330 kg, Equipment: lighting, Attention: The complete equipment list of the vehicle is included as a photo in the images of the ad! STILL Order Picker MX-X 80 – Used unit with premium features, single sale Vehicle Data: - Model: STILL MX-X 80 (Very Narrow Aisle Truck with Pivoting Reach Fork) - Year of manufacture: 2020 | Operating hours: approx. 2,810 h - Load capacity: 800 kg | Lift height: 8,750 mm | Height: 4,400 mm Bdsdpfew U El Tsx Aa Djb - Additional lift: 1,800 mm | Fork length: 1,250 mm | Aisle width: 2,200 mm - Pivoting reach fork: 180° swiveling, max. 1,400 kg at 600 mm LSA - Adjustable forks: hydraulic, outer width 400 – 1,650 mm Features (Selection): - Mobile personal protection system with 2 laser scanners, fully factory-integrated - Special design pivoting reach fork carriage with reinforced capacity, reach carriage for wide loads up to 2,600 mm - IZF – Inductive Guidance System with guide wire detection, lane detection, automatic aisle recognition & emergency stop on signal loss - Cabin: Combined design for standing/seated order picking, with LED work lights, warning beacon & polycarbonate windshield - Ergonomic driver’s seat (fabric-covered, height & tilt adjustable, suspended), foldable - Control panel: multifunctional, steering knob, 5 programmable favorite keys, contactless two-hand sensor, MMS terminal preparation - Safety: automatic braking, stop & absolute stop at aisle ends, rescue lowering system, RFID-controlled height limit (2 definable heights) - OPTISPEED 3.0: dynamic load display depending on fork height, automatic reach reduction - Additional equipment: Panoramic rear-view mirrors on both sides, DIN A4 writing pad, modular accessory system on cabin railing Battery & Charger: - 80V traction battery (930 Ah), low maintenance, with central water filling system (STILL) - External charger D 80/100 PXS, charging time approx. 9–11 h, 400 V / 32A CEE, LED charge status display Special features: - Extended chassis – ideal for special pallets/corlettes – no disadvantage in racking applications - Machine is currently set up and ready for demonstration - Single unit – not available as a series sale, we bought the truck ourselves 1 year ago but did not set up a warehouse Condition & Removal: - Very well maintained, fully functional, no known defects - Removal only possible by crane (hall height 10 m) – disassembly required and to be organized by the buyer or by arrangement

Condition: used, Manufacturer: Ima Farmomac Model: F370 18VL 8C Year: 1987 frame - Machine refurbished by the manufacturer in 2004 with pharmaceutical qualification. Type : Monoblock bottle filling and crimping machine. Application: Glass and plastic syrup bottles with aluminium PP28 cap (Ø 28 mm-) Industrial sector: Pharmaceuticals and cosmetics Movement: continuous automatic Number of filling heads: 18 units Number of crimping heads: 8 units Volumetric pump: max. filling 1000 ml   Available sizes: 370 ml and 200 ml Capacity: 6000 vials/h in 370 ml Capacity: 7500 vials/h in 200 ml   NEM cap lifter Vibrating bowl Electrical cabinet Laminar flow cabinet Vessel/buffer tank before filling. Vial infeed conveyor with paddles Control box and power cabinet. Bdodpfx Aajx R Dqzo Deb Protective covers with safety devices. Available history and documentation   These elements can be quoted separately. change of format, bottle sealing (screw caps, pressure caps, end caps, PFPs, etc.), etc.

Condition: used, Year of construction: 2010, Overview  This semi-automatic pouch filling machine was manufactured in 2010 by AIT. The machine is available for sale because it is no longer in use by the seller. It is suitable for filling liquids and semi-liquid products into Doypack bags with screw caps. Thanks to its simple and user-friendly interface, the AIT DOYPACK is ideal for small to medium production volumes. The machine is promptly available. Technical data Capacity: Up to 600 bags/hour (depending on product viscosity and format) Volume range: 0.5L – 3L Pressure: min. 6 bar Bag type: Doypack with screw cap Filling principle: Gear pump with high-precision flowmeter Operation: Semi-automatic (manual bag positioning, automatic filling and capping) Frame: Stainless steel Cleaning/Sterilization: Integrated cleaning and sterilization functions Control panel: Touch screen Scope of Delivery  AIT DOYPACK semi-automatic filling and capping machine Integrated gear pump and flowmeter Touch screen control panel Bdjdpfx Aaswiu Hks Dob

Condition: used, Comprehensively tested, used Olsa Process Mixing Suite. This mixing suite comprises of: 2 off Olsa Pharmaceutical grade mirror polished 316 stainless steel vacuum mixer homogenising vessels.  Full hydraulic raise/lower with electrical panels, touchscreen PLC controls, CIP pumps, diaphragm product discharge pumps, both vessels on load cell system. Manuals/drawings included. Technical specification below for each main process vessel.   Vessel 1 Gross capacity 266L, full scraped wall 2.2kw anchor mixer, contra rotating mixer 1.1kw, bottom entry high speed homogeniser 7.5kw.  Vessel rating 2.5bar plus full vacuum at 155 Degrees C.  Jacket 4.5bar 155 degrees C. CIP system.  150mm dia hinged chargeport with sight glass, vessel light.  Numerous top dish connections, vacuum pressure gauge, 30mm dia outlet.  Vessel dimensions 1.3m x 2m x 2.4m closed.   Bdjdpfxjymaz He Aa Dsb Vessel 2 Gross capacity 266L, full scraped wall 2.2kw anchor mixer, bottom entry high speed homogeniser 7.5kw.  Vessel rating 2.5bar plus full vacuum at 155 Degrees C.  Jacket 4.5bar 155 degrees C. CIP system.  150mm dia hinged chargeport with sight glass, vessel light.  Numerous top dish connections, vacuum pressure gauge, 30mm dia outlet.  Vessel dimensions 1.3m x 2m x 2.4m closed.

Condition: like new (used), Year of construction: 2022, operating hours: 170 h, functionality: fully functional, machine/vehicle number: 156-600, total height: 2,920 mm, total width: 1,480 mm, total length: 2,600 mm, type of input current: AC, overall weight: 2,500 kg, film width: 100 mm, compressed air connection: 6 bar, input voltage: 400 V, product height (min.): 50 mm, product height (max.): 110 mm, product width (max.): 50 mm, product length (min.): 50 mm, product width (min.): 50 mm, product length (max.): 110 mm, nominal power (apparent): 8 kVA, filling weight (min.): 5 g, filling weight (max.): 20 g, air demand: 0.4 m³/h, input current: 12 A, roll diameter: 76 mm, Equipment: documentation/manual, safety light barrier, The FlexiBag Bi 260 was acquired as a test machine for processing polymer-bound phase change granules. All specifications regarding packaging width, package weights, and output rates refer to polymer granules with a bulk density of 550 kg/m³ and a density of 860 kg/m³. In principle, the machine can be used for all types of granulates, powders, etc. For dosing, a BW211 Micro belt weigher from DOWATEC is installed. This enables very precise dosing. Thanks to two dosing belts, a high productivity of 30 cycles per minute can be achieved by the packaging machine. Bedpfx Aaoyi Eqxo Dodb The FlexiBag Bi 260 is suitable for impulse and heat-sealable films as well as nonwovens. The packaging machine has only been used as a test machine and has a low total operating time of 170 hours.