Welding and straightening table

RABOMA RT2000

Condition: used, REX four-sided planer, planing width 51 cm, maximum planing height 20 cm, 2 feed speeds, vertical spindles have 2 rotation speeds, electric table lifting device Lsderxf Smspfx Ahvjhd

Condition: good (used), Year of construction: 1988, machine/vehicle number: 1669-110-1406, Offer 25094 Technical specifications: - Drilling capacity in steel ST 60: 50 mm - Drilling capacity in steel ST 60: 60 mm Ledpfowdvwtex Ahvjhd - Drill spindle mount: MT 4 - Drill spindle stroke: 225 mm - Drill spindle speed continuously adjustable from 35 – 950 rpm - Right-hand and left-hand rotation - 3 feed rates: 0.1; 0.16; 0.25 mm/rev - Throat 360 mm - Max. distance between drill spindle and table/base plate 740/1220 mm - Table with 2 T-slots 700 x 590 mm - Height adjustable via rack and pinion with hand crank - Drive 400 V / 2.2 / 4.0 kW - Space required approx. W 700 x H 2150 x D 1150 mm - Weight approx. 850 kg - With: - Emergency stop button - Lighting - Coolant system

Year of construction: 2023, condition: new, PLASMA CUTTING MACHINE MODEL MTX 1500/3000 Construction: steel+aluminium Overall dimensions: 3350/2200/1300 Working area: 3100/1520/140 XY axis drive: 4Nm stepper motors with gears, precision grade 8 Z axis drive: stepper motor ball screw Travel speed: up to 25m/min Z axis control system: THC My plasma system Collision protection system to prevent burner damage Linear guide: TBI Automatic material detection system Power supply: 240V Maximum load: 1700kg Total weight: 1200kg net INCLUDED: - control panel -water table Lhodpfx Aheh Rabnevjd -exchangeable grate -control software in German, English, Polish -Certification of conformity CE - DTR - warranty The possibility of selecting the appropriate Hypertherm cutter to individual needs of the company.

Condition: good (used), Year of construction: 1984, FORD 6610 tractor, year 1984, no. 08076000 Ljdsycqmrepfx Ahvehd

Condition: used, fuel type: diesel, Year of construction: 2016, operating hours: 955 h, Round tipper Dumper Bergmann 2060Rplus Year of manufacture: 2016 Operating hours: only approx. 950 Payload: 6,000 kg Ljdpfx Aoyaa S Eshvohd Unladen weight: 4,045 kg Body capacity (struck): 2.5 m³ Body capacity (heaped): 3.6 m³ Body system: hydraulically 180° rotatable and tiltable skip Height: 3,107 mm Width: 2,018 mm Length: 4,489 mm Ground clearance: 2,373 mm Speed: 0-28 km/h Gross weight (road): 7,490 kg, Road payload: 3,190 kg This offer is addressed exclusively to commercial buyers as defined by §14 BGB.

Condition: good (used), Year of construction: 1985, Table milling machine, table milling machine Lhedpfx Ahjcnpxnevjd -Table milling machine: with rigid spindle -Feed: -Speeds: 3000, 4500, 6000, 9000 rpm -Dimensions: 1400/800/H1480 mm -Weight: 600 kg

Year of construction: 1998, condition: good (used), machine/vehicle number: 0159488169537, Offer 23293 Technical data: - Pressure capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm - stroke infinitely variable 0 to 28 mm Lodpfx Aopuy H Dehvehd - stroke rate 26 to 36 1/min - throat 610 mm - Installation height 240 mm - Drive 400 V / 4 kW - Space requirement approx. W 750 x H 1650 x D 1350 mm - weight approx. 1300 kg - with: - foot switch - grain search device, - support table with foldable stops W 1100 x D 850mm - shifting distance of the stops from the center of the punch - width between Li and Re approx. 470 mm x D 510 mm

Condition: used, turning length 600 mm turning diameter over bed 360 mm turning diameter over slide rest 190 mm bed width 295 mm number of spindle speeds 45 - 2240 U/min. spindle bore 33,0 mm tailstock quill taper MT MK 3 feed Längs 0,02-0,8 mm/U feed Quer 0,0125-0,5 mm/U total power requirement 5,5 kW weight of the machine ca. 1900 kg range L-W-H 2050 x 950 x 1280 mm Refurbished and repainted in 2013 Costs around 16.000 euros Lhodpfx Ahjxaamujvjd Furnishing: - WNW NILES 3-jaw chuck Ø 200 mm - Multifix steel holder size B with inserts - revolving center points - chuck key - Movable tailstock - Operation manual

Condition: like new (used), Year of construction: 2009, functionality: fully functional, Planer machine with two cutters, lower and upper. Lhodpfx Aheufr H Ajvsd

Condition: excellent (used), Year of construction: 2011, For sale are 3 cross conveyor assemblies, each consisting of 2 cross conveyors including connectors: Number of strands: 4, clear dimension between the strands 2,400mm Conveyor length: 12,500mm Conveyor height: 500mm Drive: spur gear motor Conveying element: Duplex-Präzi roller chain Lhedpfjrfab Rsx Ahvod Conveying direction: forwards/backwards Course: horizontal Carrier distance: without carrier Load in t: 30t - max. 20t can be transported Discharge: Holders for timber discharge available Optionally, the 6 cross conveyors can also be used individually.