RÜCO double crosscut saw Type 22

Rüco Type 22

Condition: used, Year of construction: 2013, functionality: fully functional, Fisher+Rueckle FZR-24 Veneer cross-gluing machine, year 2013 for sale! Veneer strip length 400-1100 double lane/ 350-2100 mm single lane Veneer strip width 50-500 mm Veneer strip thickness 0.3-1.5 mm Max nominal output /machine cycles 30 cycles/min Average production speed 17-20 cycles/min Effective length of heating zone 2478 mm Iaodoumrf Ajpfx Aa Esw Connection power 22 kW Compressed air 6 bar Glue types PVA or UREA based

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Isdpfx Aev Si Szja Eoaw Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2013, operating hours: 3,000 h, 5-axis CNC portal machine; Console table with 6 movable consoles, each with 2 suction cups, side and longitudinal stops, LED position display for vacuum suction cups Venture 316 Future Package 10 extraction rails, Power-Clamp connection, vacuum connection for templates WORKPIECE PARAMETERS: – Maximum workpiece length: All units, single operation: 3300 mm; pendulum operation: max. 1740 mm Tool diameter 25 mm: single operation: 3475 mm; pendulum operation: max. 1915 mm Ijdpjy E Npfofx Aa Eoaw – Workpiece width: Front stop: 950 mm all units / 1050 mm with tool diameter 25 mm Rear stop: up to 1400 mm / 1550 mm – Workpiece thickness: – Max. 250 mm including clamping devices – Up to max. 60 mm with standard clamps SAFETY AND PROTECTIVE EQUIPMENT: EC-compliant; Safety enclosure on the right with door Left and rear: wall installation! Equipment: 10 kW Drive5C spindle and 14-position tool changer (carousel) + 9-position linear changer (side mounted) Drilling head with 16 spindles (V12/H4/S0/90°) DRIVE5C+ interface for aggregates Tool length measuring probe Software for position measurement and CNC coordinate rotation Tool transfer station Coolant tank for processing spindle Vacuum pump 300/360 m3/h Powerclamp pneumatic package Control system: POWERCONTROL PC85 with POWERTOUCH system; IPC POWERPACK Operator terminal for program start; camera system with tablet PC WOODWOP CAD/CAM standard interface Documentation and control texts: German Delivery includes only the tools and HSK tool holders shown in the images!

Condition: new, The new cylinder brush and sanding machine from Holzprofi Maker can be quickly and easily converted from a sanding machine to a brushing machine in just a few seconds. It is ideal for smaller workshops as it combines two machines in one. Advantages and Features: - Versatile options for surface finishing - Quick and easy changeover from sanding to brushing - Many different brushes available for a wide range of effects and processing possibilities - Infinitely variable feed rate and roller speed for perfect results - Workpiece width up to approx. 1100 mm - Precise adjustment of sanding height for consistent results Iasdpfewzzivex Aa Ejw Technical Data: Sanding width: 560 mm (1120 mm) Sanding height: 3 to 75 mm Roller diameter: Ø132 mm Table dimensions: 592x530 mm Extension table dimensions (2x): 582x245 mm Roller speed: 0 to 1800 rpm Feed speed: 0 to 7.5 m/min Extraction port diameter: 100 mm Main motor power: 1.5 kW Feed motor power: 120 W Voltage: 230 V Dimensions: 1010x1060x1190 mm Weight: 155 kg Optional Accessories: Texturing brush for even and structured surfaces Abrasive flap brush for finishing and surface preparation tasks Steel wire brush for a used-look finish and pronounced grain effect

Condition: new, Year of construction: 2025, Roller diameter: 640 mm Outrigger overhang: 620 mm Cutting depth: 400 mm Table can be swivelled: yes, -0 to +15° Table size: 870 x 620 mm Belt speed: 1660 m/min Motor power: 2.2 kW / 400V Motor brake: yes / automatic Dust extraction port: 2 x 120 mm Machine length: 1190 mm Machine width: 780 mm Isdpfx Aaogtdpmo Eoaw Machine height: 2063 mm Weight: 320 kg

Condition: excellent (used), Tacchella Macchine grinding machine, type 40LR, in very good condition. Specifications: Longitudinal travel, X-axis: 400 mm Cross travel, Y-axis: 250 mm Iedpfxjivg E He Aa Eeaw Clearance between worktable and spindle axis: 375 mm Wheel speed: 3000/6000 rpm Wheel dimension: 150x20 mm Weight: 800 kg

Condition: used, CNC machining center BIESSE Rover C 6.50 CONF.2, year 2007 Working area: approx. 140 × 460 cm Machine dimensions: 300 × 650 cm Isdsw Rpd Sspfx Aa Eeaw Weight: approx. 6,100 kg Two working heads Tool magazine: 22 positions Vertical drilling spindles: 28 pcs Horizontal drilling spindles: 12 pcs Price negotiable, available immediately. Price is without VAT.

Condition: used, Year of construction: 1995, cutting width 375 mm Cutting height 150 mm dimensions of saw-blade 500 x 30 mm Motor output 2 x 3 kW Cutting length 5100 mm speeds 2800 U/min air pressure 6 bar weight of the machine ca. 700 kg dimensions of the machine ca. 6100 x 1450 x 1450 mm * Profile support plate made of steel * Stable cast construction of the saw unit * Large cutting range, 2 profiles can be cut at the same time * Easy adjustment of the moving unit with roller guides * Double storage of the swivel device * Safe clamping thanks to the two-pressure system Iedpfx Aastv Rgro Eoaw * Double saw feed guide * Hydropneumatic saw feed * External dimension correction scale * Left saw unit fixed * Swivel range 45°-90° * Including suction (without piping) ALKO Mobil-Jet 100 year of manufacture 2002

Condition: used, Year of construction: 1995, functionality: fully functional, total length: 36,000 mm, Ironing dryer, working width 4,600 mm, length 22,000 mm, of which 10,000 mm with press rollers, separate press cooling field, hot water heating medium, semi-automatic feeding device, type BFT46 and lifting platform, max. veneer length: 4,600 mm, roll width 600 mm, total length: 36,000 mm, 11 fans, PLC control renewed in 2017 Iajdpfx Aaev Hygfj Ejw A second ironing dryer of a similar design is available.

Condition: used, pressure 160 t passage width / mm stroke / mm Working height 800 mm Iaodpfxeiulkqj Aa Esw total power requirement 15 kW weight of the machine ca. 11,8 t - Table size: 1000x1000mm - Distance table/ram, large stroke above, gain. above: 800mm extra information Removable table