CIP Pumpe mit Dosierung

Prominent CIP

Condition: like new (used), Year of construction: 2021, For sale Food Dryer - Dehumidifier. Used a few times. Max. indoor temperature: 60 degrees Celsius. Prodpfjibwb Tsx Apdec Flow rate: 4500 m3/h Shell for products: 25 psc. Power required: 220V 50Hz More parameters in photos. If you have an questions on this, please do not hesitate to contact us.

Condition: used, Year of construction: 2024, Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: Psdpfxsvrfivs Apdsrc - Capacity: 9,500 bph - Cell Pitch: 95 mm - Bottles per row: 25 - Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg - YOM 2024 - Formats: - 0,25l - 0,33l - 0,5l - 0,75l The Machine in Detail / Equipment Features: - Heated by steam - Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing - CE certified - Chemical Dosing Pumps - Machine data sheet included - High pressure pre rinsing - Rotating Spray nozzles - Single End Machine - Label discharge rear right - Finger discharge + finger feed - Bottle cells made of plastic - Concentration measurement - NaOH supply liquid - Sectional view arrangement of baths - Spindles SST - 24 volt control voltage - Control Siemens S7 - Regularly maintained - Full machine body in SST - Vapor Discharge - Machine dismantled, ready to ship - Automated machine Startup

Condition: used, Year of construction: 2002, CIP tanks for water, caustic, acid and disinfectant. Additional title: 4 vertical vessels Volume: 1270 l Caustic tank, acid tank, disinfectant tank Prodpfjxbpibox Apdsc Material: Stainless steel Features: Water tank, 870 l; Caustic tank, 1270 l; Acid tank, 1270 l; Disinfectant, 1270 l

Condition: excellent (used), Year of construction: 2012, clamping force: 160 kN, ENGEL VC 1050/160 Tech – Clamping unit Clamping force: 1600 kN Opening stroke: 608 mm Prjdpfox Up T Nsx Apdec Ejector stroke: 150 mm Ejector force: 61 kN Screw diameter: 45 mm Max. swept volume: 342 cm³ Screw speed max: 290 r/min Screw speed max (current): 290 r/min Injection rate: 170 cm³/s Injection rate (increased): 134 cm³/s Specific injection pressure: 2403 bar Specific injection pressure (increased): 2404 bar Nozzle stroke: 350 mm Nozzle contact force: 67.2 kN Type: Horizontal Drive: Hydraulic hours: 53.000h

Condition: good (used), Year of construction: 2014, functionality: fully functional, cooling capacity: 20 kW (27.19 HP), type of input current: three-phase, type of cooling: air, overall weight: 266 kg, input voltage: 400 V, total width: 1,480 mm, total length: 510 mm, total height: 2,010 mm, warranty duration: 6 months, heating capacity: 20 kW (27.19 HP), Aircooled chiller/Heat pump SYSTEMAIR SYSCROLL 20 AIR EVO HP 20 kW/20 kW Cooling capacity: 20 kW / 5.69 tons (12/7 — 35°C) Heating capacity: 20 kW / 5.69 tons (40/45 —7°C) Year of manufacture: 2014 Options: Heat pump. Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi ANB42FPJMT (scroll, inverter) Type of refrigerant: R410a Number of fans: 2 pcs. Hydraulic module: 1 pcs. water pump EBARA matrix 5-2T/0,45 COIB, buffer tank 112 l. Dimensions: 0.51x1.48x2.01 m. Weight: 266 kg. Condition: Good CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. Pedpfxezi Dhno Apdorc The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: ready for operation (used), Year of construction: 2017, A Jakü deaeration and CO2 impregnation system is available. Nominal capacity: 10000l/h, water inlet pressure range: 3bar-4.5bar, CO2 inlet pressure range: 8bar-10bar, nozzles: 3, nozzle fineness: medium/fine/very fine. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2400mm, empty weight: approx. 800kg, operating weight: approx. 1400kg. Documentation available. An on-site inspection is possible. Pedpfoy H I Hlsx Apdsrc

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, pressing force: 500 t, stroke length: 400 mm, table width: 1,600 mm, table length: 900 mm, year of last overhaul: 2017, Equipment: safety light barrier, Dieffenbacher PO 500A press Pjdpfx Apov E Nlzsderc A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2017. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Dieffenbacher PO 500A press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2017. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Year of construction: 2024, condition: ready for operation (used), Nominal output: 9500 bottles/h (based on 0.5 litre NRW bottle, 68x260mm, 370g), mechanical control range: 3800-10,450 bottles/h, cycle time: 9.47s, total bottle cells: 3375, filled: 3175, per row: 135 basket rows, cell pitch: 95mm, chain pitch: 140mm, drive lanes: 3 lanes, discharge lanes: 3 lanes. Total throughput time: 21.32min, total immersion time: 7.24min, caustic immersion time: 5.34min, caustic filling time: 7.05 min, caustic contact time: 9.91min, total rinse time: 123s, total spray time: 47s, water consumption: 2.61m³/h, 275 ml/bottle, heat consumption (operation): 721. 715 kJ/h = 172,247 kcal/h, 75.97 kJ/bottle = 18.1 kcal/bottle, heat consumption (heating): 2,880 MJ = 687,467 kcal, total installed power: 27.2kW, pump power: 20.4kW, drives: 5.7kW, compressed air consumption (at 6bar): 0.2m³/h, dimensions housing: 7162x2740x2500mm. Overall dimensions: 7162x3540x2730mm, minimum access opening (W x H): 3840x2000mm, minimum ground clearance: 75 ± 25mm, height of infeed/outfeed: 645/1165mm, empty weight: 11,680kg, operating weight: 31,563kg, floor load: 8690kg/m², load per spherical base: 2130kg, number of spherical bases: 12. The machine has been running for approx. 6 months, so it is almost as good as new, including documentation. An on-site inspection is possible. Prjdpewb E S Iofx Apdoc

Year of construction: 2026, operating hours: 10 h, condition: like new (used), Machine is suitable for foundries, or standard work. Machine height : ~5.250 mm Machine width : ~3.300 mm Machine length : ~2.500 mm Maximum work volume : 0.150 m3 (150 litres) Maximum load weight : 300 kg Prsdpjlqxn Rofx Apdsc Maximum piece weight : 15 kg Blast compartment diameter : ~750 mm Blast compartment length : ~850 mm Number of blast wheels : 1 x 11kW E-Eco Frequency inverter for turbine : 1 pcs Magnetic cleaner : 1pc Blasting time : Adjustable PLC : Siemens S7 1200 + touch panel7'' Modem : 1 pc Safety fance with fotocell : Yes Automatic abrasive filling : Da Filter : Integrated in the machine Total installed power : ~17 kW Machine working hours : 10h The machine is on stock. A test of the machine in our premises is possible with prior notice

Condition: used, Year of construction: 2000, operating hours: 15,800 h, Used Bottle Washer KLINGER up to 9600 bph This Bottle Washer handles up to 9,600 bottles per hour. The machine features 20 bottles per row, ensuring a long soaking time and double lye pumps. Constructed entirely of stainless steel, this bottle washer uses a Siemens S7 control system, ensuring reliable and precise operation. Technical Specifications of the Washing System The Used Bottle Washer KLINGER up to 9600 bph includes double heaters and overflow pumps, providing a high cleaning capacity. Consequently, this configuration treats each bottle uniformly, enhancing the efficiency of the washing process. The Siemens S7 control system, furthermore, offers a user-friendly interface via a touch panel, simplifying operational management. Potable Water Treatment Plant Potable water treatment plays a crucial role in the proper functioning of the bottle washer. Hager + Elsässer provides the plant, which includes cation and anion exchangers, a salt container, a pre-filter, and a UV probe. This system processes 5 m³/h, ensuring high-quality water. Additionally, the reverse osmosis (RO) plant delivers a total desalination capacity of 2.5 m³/h, ensuring pure water for the washing process. Electrical Configuration and Control Panels This Bottle Washer features three electrical panels, arranged from left to right, with a Siemens touch panel for centralized control. This configuration allows for accurate monitoring and optimal operational management. In addition, the upper panels handle cooling, with a total residence time of 4.13 minutes and a treatment time of 1.63 minutes. Technical details Bottle cells: width and diameter: height 100 mm. 360 mm spray hole in the base of the cell diameter 20 mm. The bottle cell is not round on the lower insertion side, but flattened , so that even bottles with small diameters can be inserted into the cell without any problems. Bottles from 200 ml to 1,500 ml can be rinsed. The diameter of the bottle mouth must not be smaller than the spray hole in the bottom of the cell, i.e. at least 20 mm. Prodpfxoxqmrfs Apdjc If the bottles are very light, or made of PVC, the spray pressure of the pumps could be reduced using software, so that the bottles are not sprayed out of the cell. Fort PVC bottles the diameter of the bottles should not be smaller than 50 mm, depending on the shape and weight. The higher the weight, the better… PVC bottles do not cause problems because of their shape or diameter, but are usually too light… So your bottles can be easily worked. Treatment and Spraying Details of the Used Bottle Washer KLINGER up to 9600 bph The central panel, on the other hand, manages the spraying times with the following specifications: Spraying soda: 0.5 min. Residual soda: 0.83 min. Hot water: 0.38 min. Warm water: 0.38 min. Cold water: 0.38 min. Fresh water: 0.