Chips center

PROMATEC

Condition: used, TECHNICAL DETAILS - Quantity of spindles : 6 - Bar clearance : 40 [mm] - Rotation speed : 7 000 [rpm] - Spindle power : 13 / 24 [kW] NUMERICAL AXES : 27 - Slides unit 1.1 : axes X and Z CNC-controlled - Slides unit 1.2 : axes X and Z CNC-controlled - Slides unit 2.1 : axes X and Z CNC-controlled - Slides unit 2.2 : axes X and Z CNC-controlled - Slides unit 3.1 : axes X and Z CNC-controlled - Slides unit 3.2 : axis Z CNC-controlled - Slides unit 4.1 : axes X and Z CNC-controlled - Slides unit 4.2 : axis Z CNC-controlled - Slides unit 5.1 : axes X and Z CNC-controlled - Slides unit 5.2 : axis Z CNC-controlled - Slides unit 6.1 : axis Z CNC-controlled + SCARA axis - Slides unit 6.2 : axes X and Z CNC-controlled - Slides unit 6.3 : axis X CNC-controlled ELECTRICAL INPUT - Voltage : 400 [V] - Frequency : 50 [Hz] - Installed power : 65 [kW] DIMENSIONS OF THE MACHINE - Floor space : 3329 x 2032 [mm] - Height : 2654 [mm] Dcjdpfxjuhantj Ab Tjr - Weight: 7100 [kg] HOURS - Hours under power : 45965 - Production hours : 19065 EQUIPMENT - CNC Siemens 840D (PL) double NCU - 2 control panels CN - 6 collet receivers TOPLUS with built-in stop - 1 counter-spindle in position 6.1 - Clamping device in counter-spindle : chuck Röhm KFD-HS 110/3 - Coolant through counter-spindle center - Cn options counter-spindle/ polygonal milling - Rear machining device on slide 6.2 : 3x fix - Preparation 2 additional controls with electronic shaft in position 1.2.3 - Preparation 2 additional controls with electronic shaft in position 4.5.6 - STAUBLI robot type TX60 (6 axes) - Robot collet double clamping external type PZN50 - Swiveling plate (4 positions) - Coolant tank KNOLL with hinged chip conveyor, 2 HP pumps 40 [bars] - Oil mist aspiration device Büschel - Cooling unit RIEDEL - Preparation ARTIS

Condition: good (used), Year of construction: 2003, travel distance X-axis: 3,900 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, rapid traverse X-axis: 100,000 m/min, rapid traverse Y-axis: 60,000 m/min, rapid traverse Z-axis: 60,000 m/min, workpiece weight (max.): 2,200 kg, table width: 900 mm, table length: 4,200 mm, 5-axis CNC machine (VMC) DECKEL MAHO - DMF 360 Linear HSK-A63 Spindle Pendel screen Production package IKZ 40 Bar Filter capacity 23 L/Min Coolant tank 900 L Last DMG Repair in 2023 for 11.000 EUR    X - Travel: 3900mm Y - Travel: 920mm Z - Travel: 820mm B - Axis: 108° Table Length: 4200mm Table Width: 900mm Table load: 2200 Feed rate X-Axis: 100000mm/min. Feed rate Y-Axis: 60000mm/min. Dsdpfx Abjw Rdyho Tscr Feed rate Z-Axis: 60000mm/min. Spindle Taper: 63ISO/Bt/Mk Power on spindle: 35kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:40 Number of controlled axis: 3+1 Chip conveyor: Yes Coolantsystem: Yes Length: 8500mm Width: 3450mm Height: 2910mm Weight: 30700kg

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 25,000 m/min, rapid traverse Y-axis: 25,000 m/min, year of last overhaul: 2025, RepairFIT by Dornhöfer The Difference. Including installation and commissioning! Technical details of the machine: Year of manufacture: 2008 Control: Heidenhain iTNC 530 Travel range: X-axis (mm) 2,500 Y-axis (mm) 1,250 Z-axis (mm) 1,000 Rotary table size: Length (mm) 1,000 Width (mm) 1,000 Spindle speed range: 15,000 rpm Feed rates: X, Y & Z axes (mm/min): 10 - 10,000 Max. rapid traverse speed X, Y & Z axes (mm/min): 25,000 Milling head: Automatic milling head, vertical Tool holder: HSK 63 A Main spindle drive power: 100% duty cycle KW25 - Chip conveyor - Cooling lubricant system - 3D thermal expansion compensation - Portable electronic handwheel Heidenhain HR 410 with 3m spiral cable - INA RUE 45 linear guideway system on all linear axes with central lubrication - Complete splash guard enclosure RepairFIT is our proven offering for a profitable entry into our product lines. Dcodpjv Rw Uusfx Ab Tsr The machines available in this line are procured by us following a rigorous selection process and subjected to a thorough inspection (deep dive check). After intensive cleaning, any obvious defects and faults identified are professionally repaired by our expert service team.

Condition: used, Year of construction: 2004, x-travel 3.000 mm y-travel 1.000 mm z-travel 860 mm Control Heidenhain iTNC-530 table-size 3.600 x 1.050 mm T-slots 7 x 18 T - slots distance 125 mm distance table - lower edge spindle 25-366 mm Dcedpfx Aswqr Nlsb Ter table weight 4.200 Kg b-axis +-105 ° c-axis +-360 0 rapid travel x/y/z 30.000 mm/min rotary table Durchm. 1.000 mm max. turning diameter 1.400 mm number of spindle speeds 9.000 U/min/rpm tool taper ISO-50 DIN 69871-AD spindle drive 28,5 kW max. torque on the spindle 240 Nm tool change unit AITEK, 40 fach 20 handwheel Ink. Shuttle operation Inkl Chip coveyor Ink. Internal cooling system 20 bar total power requirement 65 kW weight of the machine ca. 24,8 t dimensions of the machine ca. 8.056 x 5.496 x 3.790 mm

Condition: excellent (used), Year of construction: 2017, operating hours: 10,240 h, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller model: Heidenhain, spindle speed (max.): 15,000 rpm, operating hours of spindle: 10,400 h, We offer in good condition DMG Mori DMF 360-11 4-axis milling machine. X-Axis travel: 3600 mm Y-Axis travel: 1100 mm Z-Axis travel: 900 mm Spindle has been changed 2000 hours ago due to short circuit (no crash) HSK-A63 15.000 RPM spindle 46kW / 61.7 hp - 200 Nm Machine has following options: Swivel head Heidenhain Touch probe TS 642 Dcjdpfx Aexqa I Hob Tsr Automatic door Internal coolant 40 bar with paperbelt filter

Condition: excellent (used), Year of construction: 2014, CNC Heidenhain iTNC 530 Electronic handwheel Milling head 13,000 spindle hours Speed: 20 – 14,000 rpm Motor power: 18.9 kW Tool holder: SK40 Continuous feed rate up to 20,000 mm/min Clamping table: 2100 x 700 mm Max. table load: 1,500 kg X axis: 1,800 mm Y axis: 700 mm Z axis: 700 mm Tool magazine capacity: 30 positions Dcodpfx Abjxbyrmo Ter Max. tool in magazine: length 300 mm, Ø130 mm Through-spindle coolant Chip conveyor: 5,890 x 1,030 x h1,550 mm, weight 770 kg Tool set: 25 pcs BLUM tool probe Complete documentation Transport dimensions: 3,423 x 7,060 x h2,622 mm Weight: 12,380 kg Videos available.

Condition: used, Year of construction: 2020, Technical details: turning diameter: 670 mm turning length: 1540 mm control: F31iB5 Celos Fanuc 35iB5 swing diameter max. over bed cover: 700 mm Travel turret No.1 (milling spindle) x/y/z: 495 / ± 150 / 1562(+164) mm Rotation B-axis: -30° / +210° Rapid traverse feeds turret 1 (milling head) x/y/z: 40/40/40 m/min RPM milling spindle: 12000 1/min power capacity - milling spindle: 20,2/18,8 kW Torque of milling spindle: 120 / 44 Nm tool taper milling spindle: Coromant Capto C6 Tool magazine for milling spindle (turret 1): 76 Tool change time tool/tool, milling spindle: 1,25 s Spindle 1 RPM: 3000 1/min Spindle 1 Power: 36 / 30 / 25 kW C-axis spindle 1: 0,001 ° Bar capacity spindle 1: 102 mm Spindle 2 RPM: 4000 1/min Spindle 2 power: 26 / 22 / 15 kW C-axis spindle 2: 0,001 ° Bar capacity spindle 2: 80 mm dimensions of the machine ca.: 7,8 x 3,6 x 2,9 m Linear scales on axis: X, Y programmable steady: KLU-A530 & SLU-X3.2 Accerories Chip conveyor tool setting spindle load monitor Airblow system Airblow system internal to cutting tool Spindle 1 Chuck Kitagawa 250 (B 210) mm Spindle 2 Chuck Kitagawa 250 (B 210) mm Interface for coolant through the spindle 70 bar Tailstock specification for spindle 2 Measuring probe for work piece Renishaw OMP60 pendant hand wheel Parts and total counter Signal lamp 3 colors Robot interface Matris Robot System R-2000iC/165F Dcodpfowl Ag Dsx Ab Tjr Automatic door Rotoclear window Quick fixed cycles Program restart Signal lamp 4 colours Ethernet I/P Interface manual tool eye Automatic door Air Filter Oil skimmer Tactile sensor for workpiece measuring Airblow system external Subspindel Spindle 1 coolant jet Spindle 2 coolant jet Coolant Gun Coolant through spindle 70 bar with filter Knoll High performance turning and milling center with multi axis milling head, 76 tool magazine Capto C6, main- and sub spindle, which can act as tailstock. It has automatic door and Matris robot R-2000iC/165F. *

Condition: new, Experience unparalleled precision and performance with ROBBI's range of cylindrical grinding machines. Our machines offer grinding lengths starting from 2000mm and are available in semi-automatic and CNC versions. With a grinding diameter range of 300-1000mm, the possibilities are endless. Partly available from stock! Discover our extensive range of optional accessories that make our cylindrical grinding machines even more versatile. Whether it's for complex workpieces or demanding tasks, our machines always deliver the best results. With ROBBI's years of experience, trust us to optimize your machining processes. Invest in quality and precision - contact us today! MAIN TECHNICAL DATA: Model: Omicron CNC 80 Grinding diameter: 795/895/955 mm Grinding length: 3000-6000 mm Center height: 400/450/500 mm Center distance: 3000-6000 mm Swing over bed: 795/895/955 mm Max. workpiece weight between centers: 4 t Additional technical data in the appendix MAIN TECHNICAL DATA: Model: Omicron CNC 60 Grinding diameter: 595/695 mm Grinding length: 1000-3000 mm Center height: 300/350 mm Center distance: 1150-3150 mm Swing over bed: 600/700 mm Max. workpiece weight between centers: 1200 kg Additional technical data available on request or in the appendix MAIN TECHNICAL DATA: Model: Omicron CNC 36 Grinding diameter: 355/455 mm Grinding length: 630-2030 mm Center height: 180/230 mm Swing over bed: 355/455 mm Max. workpiece weight: 250 (300 opt.) kg Additional technical data available on request or in the appendix ACCESSORIES (EXAMPLE FOR OMICRON CNC 80) CNC control: Siemens 840D Glass scales: in the X-axis Coolant system: with coolant collection tray Grinding wheel dresser: mounted on the tailstock (without diamond) Telescopic cover: for the table made of fabric Machine oil: 5l for the spindle Frequency converter: for spindle motor and workpiece drive (stepless) Hydraulic unit: for controlling the tailstock quill Ball screw in the axes: X and Z Dcedpfx Ajtximvjb Tjr Optimized cycle with geometric and process parameters - The CNC grinding machines meet the production requirements for medium-sized workpieces. - The machines are equipped with the latest generation SIEMENS 840Di sl system. - The machine can be equipped with automatic measuring systems. - It is possible to design the grinding wheel for geometries specifically created for the required type of production. - High-precision machining can be performed when the grinding machines are equipped with a third interpolated axis and specially designed software. EASY PROGRAMMING Complex programs can be created without the need for ISO programming knowledge. The input of parameters is facilitated by a series of messages and characters that explain the meaning of the various parameters step by step. The programming of work cycles is done by entering the same parameters of the cycle. The sequence of execution of the various cycles can be quickly and intuitively changed. By the way, in addition to affordable new machines and tested used machines, you can expect even more from us: • Consultation and problem-solving at your location • Organization of machine transport to your facility • Installation, commissioning, and turnkey delivery, and more.

Condition: refurbished (used), Year of construction: 2013, Electrostatic air filter Indusa elstar EL4001 NVAS R/O Dcodpfx Aefyiqbeb Tjr There are 3 units still available. Air intake is on the lower right, air outlet is on the upper left. The air filters are from 2010–2013 and have seen very little use, as operations switched to a central extraction system in 2014. All filters have been fully overhauled, cleaned, disinfected, and fitted with new internals. The units are in excellent optical and technical condition. Each unit undergoes a 24-hour test run prior to delivery. The elstar series’ thoughtful design, high-quality workmanship, and flexible modular system form the basis of its success among electrostatic air filters. The electrostatic air filter purifies contaminated machine exhaust precisely where it is generated—making the air breathable again! The elstar electrofilter is designed for the separation of oil mist, coolant mist, oil smoke, welding fume, vapors, airborne particulates, oxidized smoke, and aerosols, making it suitable for almost any industrial application.

Condition: used, Cnc multispindle lathe INDEX MS 32 C Dedpfjuhaqbsx Ab Tocr