Lathe - cycle-controlled

Pinacho Smart Turn 285

Condition: excellent (used), Year of construction: 2010, Control: Siemens Sinumerik 840D Work Area Swing diameter over bed: 820 mm Swing diameter over cross slide: 520 mm Cross slide travel: 600 mm Tool Holder: Front: Capto size C6 – Multifix D1 Rear: Boring block with clamping claw Centre Distance: 3,000 mm Main Spindle Drive Power digital AC motor – 60% duty cycle: 46 kW Number of gear stages: 2 Cedpfx Asxgdfbob Terk (ZF planetary gearbox, electrically shifted, mounted outside the headstock) Headstock Spindle nose DIN 55027 / Bore (standard): 11 / Ø 132 mm Spindle diameter in front bearing: 190 mm Speed range (constant V): 1 – 1800 rpm Standard chuck sizes: Ø 315, Ø 400, Ø 500 mm Spindle nose DIN 55026 / Bore (option): A 11 / Ø 164 mm Spindle diameter in front bearing: 210 mm Speed range (constant V): 1–1600 rpm Cross Slide Transverse feed range: 0.001 – 1000 mm/min Longitudinal feed range: 0.001 – 2000 mm/min Thread pitches: 0.01–999.999 mm Rapid traverse transverse/longitudinal: 5/10 m/min At centre distance: 4,000 mm Transverse feed force: 16,000 N Longitudinal feed force: 22,000 N Turning tool section: 40 x 40 mm² Tailstock Quill diameter: 125 mm Quill travel: 280 mm Taper: 6 Mk Electrical Equipment Three-phase: 400 V, 50 Hz Design in accordance with VDE and EMC guidelines EN50081-2 / EN 50082-2 Interference suppression level A according to EN 50081-2 For TN-S or TN-C networks / industrial networks without RCD protection Dimensions Machine (L × W × H) = 2.88 m + centre distance × 2.55 m × 2.32 m Machine Weight (Centre distance / weight approx. kg) 3000 mm: 10,900 kg

Condition: like new (used), Year of construction: 2021, operating hours: 1,200 h, functionality: fully functional, turning diameter: 1,100 mm, power: 46 kW (62.54 HP), distance between centers: 2,000 mm, load hours: 1,200 h, A DMT CD1100 lathe with Heidenhain control and only 1200 operating hours is available. The working area includes a swing diameter of approx. 1100 mm over bed and approx. 800 mm over cross-slide. The tool holder is a Multifix D1. The distance between centers is 2000 mm. The main spindle drive is a motor with 46 kW power at 60% duty cycle and features a two-speed gearbox. Tailstock: - Quill diameter: 125 mm - Taper: 6 Mk Electrical equipment: - Three-phase current: 400 V, 50 Hz - VDE and EMC directives EN50081-2 / EN50082-2 Delivery: Collection by the buyer Cedpfxoxlza He Ab Terk Payment: 100% prepayment by bank transfer immediately upon invoicing All details are subject to change and prior sale is reserved. The machine is sold without any warranty claims and remains our property until full payment has been received.

Condition: new, Year of construction: 2025, table length Rohmateriallänge 6500 mm table width Rohrdurchmesser max. 230 mm burner heads 1 Control CNC workpiece weight 300 kg Crodpfx Abjwh Ulde Tjk traversing speed 91 m/min weight 5750 kg dimensions of the machine ca. 12900 x 2370 x 2650 mm Tube laser with T-loader Configuration 1. Bodor Power laser source 6 KW 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Pneumatic chuck 5. Adaptive adjustment of jaw clamping force 6. Follow-up servo blanking clamp 7. Support for composite clamping rollers 8. Active collision avoidance 9. Automatic tube inspection 10. Automatic tube edge detection and positioning 11. Automatic adjustment of cutting gas 12. Laser cutting process database 13. Air-saving continuous jet nozzle 14. Intelligent maintenance reminder 15. WIFI internet connection 16. Water cooler 17. Extraction system 18. Wear parts set 19. Auxiliary feeding device T-Loader: - One-click adjustment - Material shortage alarm - Automatic loading - Scratch-resistant tube - Host safety lock - Tube size range: Round tube 20 - 220 mm Square tube 20 - 220 mm Rectangular tube 220 mm = side length = 20 mm - Maximum tube weight: 300 kg - Pipe loading length range: 4500 mm-6500 mm - Maximum loading weight: 1800 kg CUTTING CAPACITY: STRUCTURAL STEEL 16 mm STAINLESS STEEL 12 mm ALUMINUM 10 mm WALL THICKNESS STRUCTURAL STEEL* (mm) If DM < 50: WS = 1.2 If DM = 50: WS = 2.5% × DM Max. finished part length 4500 mm OPTIONAL: LANTEK FLEX3D TUBES PLUS

Condition: good (used), turning diameter over cross slide: 570 mm, turning length: 6,000 mm, turning diameter: 840 mm, Manufacturer: L&W Type: FB 33240 Control: Siemens 840D Solution Line Year of manufacture: 2021 3-jaw chuck SCHUNK ROTA-S Plus 500-102 3 x Fixed steady rest Duplomatic VDI turret Siemens 840 DSL This type of lathe is commonly used in industries such as: - Oil & gas (pipe threading, tool joint machining) - Steel industry (roll turning) - Power generation (turbine shaft turning) - Heavy machinery manufacturing Specifications Metric US Standard Turning length: 6000 mm Swing over bed: 840 mm Swing over cross slide: 570 mm Spindle bore: 105 mm Spindle power: 33 kW Bed width: 450 mm Quill diameter: 220 mm Crodpfewtdz Ejx Ab Tjk Spindle taper: 5 MT Spindle speed: 1200 rpm Feedrate X-axis: 5000 mm/min Feedrate Z-axis: 7000 mm/min Workpiece weight: 2500 kg Dimensions (approximate) Length: 9500 mm Width: 2300 mm Height: 2300 mm Weight: 8600 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, it does not constitute representation or contractual terms. We recommend verifying all critical details.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, overall weight: 2,500 kg, total length: 4,200 mm, total width: 2,500 mm, total height: 2,170 mm, travel distance X-axis: 390 mm, controller manufacturer: Siemens, controller model: 840D sl + ShopTurn mit „manual machine“, turning diameter over cross slide: 370 mm, bed width: 433 mm, center height: 315 mm, center width: 2,000 mm, quill diameter: 100 mm, quill stroke: 200 mm, rapid traverse Z-axis: 8 m/min, rapid traverse X-axis: 8 m/min, spindle bore: 140 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 2 rpm, turning diameter over bed slide: 630 mm, Equipment: rotational speed infinitely variable, Swing over bed: 630 mm Center distance: 2000 mm Maximum speed range: 2500 rpm Spindle power (100% duty cycle): 20 kW (AC drive) Spindle mount: Camlock D11 Spindle bore: 140 mm Included equipment includes: - 8-station SAUTER VDI-40 turret - Movable control panel along the entire length - Chip conveyor - Siemens AC servo motors - Siemens power supply and amplifier modules - Automatic (or via M function) gear change (2 speeds) - Machining area covered by two sliding doors - Operating mode 1 and operating mode 2 (setup mode at 5 rpm) - Siemens 840D sl ShopTurn control system with "manual machine" - 15-inch touchscreen format 16:9 - With manual machines, cycles can be executed without creating a program header. - Siemens control option: residual material detection. - Absolute encoder (i.e., no reference point travel required). Crsdpfxowgbuis Ab Tok - USB interface on the control panel. - Manual tailstock with drag device and 100 mm spindle diameter. - Automatic central lubrication. - Coolant system.

Condition: excellent (used), Year of construction: 2010, Swing over bed 710 mm Center height 350 mm Distance between centers 3000 mm C-axis +/- 0.05° Spindle speeds 2-1850 rpm Control: SIEMENS 840D Shop Turn Chip conveyor Misc. accessories Codpfxex A Exbj Ab Tork MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Machine-Details: Stock-No. 1022-2413 Type of machine Lathe - cycle-controlled Make SEIGER Type SLZ 700 E x 3000 Year of manufacture 2005 Type of control CNC Storage location Germany Country of origin Germany Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details: swing over bed 730 mm centre distance 3000 mm control Heidenhain MANUALplus4110 Additional information: Very well-maintained cycle lathe with only 15652 operating hours. Working area: Center distance 3000 mm Swing diameter over bed 730 mm Swing diameter over cross slide 450 mm Bed width 480 mm Main spindle: Spindle mount according to DIN 55027 size 11 Spindle bore 130 mm Spindle diameter at front bearing 170 mm Spindle taper 1:20 Tap in center sleeve MT 6 Main drive: AC drive with 2-stage ZF gearbox (automatic shifting gearbox) Drive power (100/60% duty cycle) 22/28 kW Total speed range 1 - 2200 rpm Maximum spindle torque: approx. 2200 Nm X-axis (cross slide) performance data: Maximum travel: 400 mm Feed force: 14 kN Speed: 4 m/min Z-axis (bed slide) performance data: Feed force: 18 kN Speed: 7 m/min Max. workpiece weight: Crodsxzp Nzspfx Ab Tok Between centers without steady rest: 2000 kg With one steady rest: 2200 kg With two steady rests: 2500 kg In the chuck: 750 kg Tailstock: Quad diameter: 115 mm Quad stroke: 225 mm Quad taper: MK 6 Equipment and accessories: Heidenhain MANUALplus 4110 CNC control SCHUNK ROTASplus 400-102 3-jaw manual chuck 2 steady rests PARAT tool holder Chip conveyor Coolant system Work area enclosure with two sliding doors. The machine is sold without a boring bar holder and boring bar.

Condition: new, Year of construction: 2025, 0554 mm 2000 mm 277 mm 104 mm Crsdpfx Aexxb A Uob Tok 400 mm 2000 U/min D1-11 DIN 55029 95 mm 145 mm

Condition: good (used), Technical Data for the Pallet Racking System: Racking system: SLP Technical Data for Assembly: Number of rack rows: 01 pc. Length per rack row: 15,480 mm Number of bays per rack row: 05 pcs. Number of levels plus ground level: 04 pcs. Included in the scope of delivery: 06x pallet rack uprights, used Material finish: Sendzimir galvanized Profile dimensions: C 80 x 50 x 15 x 3.5 Including horizontal and diagonal bracing, footplates The uprights are pre-assembled (welded truss design) Height: 6,870 mm Depth: 1,100 mm 40x pallet rack beams, used Material finish: grey IPE profile: 100 x 55 mm Connector: 3-hook Clear span: 3,000 mm 80x safety pins, used Material finish: Sendzimir galvanized For securing the longitudinal beams against accidental lifting 24x anchor bolts, new Manufacturer: Hilti Model: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 12x leveling plates, used Version: fully galvanized For leveling rack uprights installed on uneven floors 01x load capacity sign With information on bay load and shelf load, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Crodpfjxx Tvysx Ab Tok Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipment of this item is subject to additional charges, which can be requested from us depending on the place of delivery and the scope of delivery.