Complete microbrewery

Pfanne: Schulz 10 hl

Condition: refurbished (used), functionality: fully functional, warranty duration: 6 months, type of input current: AC, input voltage: 240 V, ambient temperature (min.): 16 °C, electrical fuse: 16 A, input current: 3 A, input frequency: 50 Hz, ambient temperature (max.): 25 °C, stack height: 880 mm, total length: 1,850 mm, total width: 100 mm, overall weight: 142 kg, inner dimension width: 863 mm, inner dimension length: 1,723 mm, inner dimension height: 733 mm, tank capacity: 595 l, energy consumption: 5 kWh, power: 0.4 kW (0.54 HP), Equipment: freezer, lighting, Fun Ice SRL is AHT representative in Romania since more than 25 years Dsdpfx Ajrhwt Sjkvswa All equipments are refurbished, but our company is selling the not-refurbished units as well During refurbishment, all the proposed used freezers undergo a full factory restoration, namely: - damages and dents of the case are eliminated; - 3-sides labeled on white RAL9003 / Gray RAL7043 (Optional any RAL or design available on request) - Hygienically cleaned - glass lid seals changed - fully accessorized inside - wall grid set, shelves and dividers - complete testing of the freezers is carried out with preservation of the change statistics and maintenance of the set temperature; - if necessary, repairs are made exclusively by ORIGINAL NEW spare parts from the manufacturer (AHT Cooling Systems GmbH); (According to the company's policy, donor parts from other freezers are never used for reconditioning) - all freezers are packed in the original factory manufacturer’s transport packaging (AHT Cooling Systems GmbH); (At the request of the customer, it is possible to use reinforced packaging for deliveries over long distances and on bad roads) All reconditioned AHT EQ series freezers are warranted for 6 (six) months for parts, with the exception of consumable and wear materials (refrigerant, gaskets, neon lamps, etc.) - Can be used as a stand-alone unit - Can be used in a line up Btqqmuwb - Accessories on stock (fixing brackets, top and side covers for multiplexing in a island, glass lid seals, sliding glass lids) - Spare parts available (compressors, inverter, control panel, sensors, fans)

Condition: like new (used), Stainless frame, belt dimensions 1200mm x 150mm, aperture 200mm x 70mm, stop/start, with alarm, 3Ph Dwsdpfefhdu Tex Akvsa

Condition: like new (used), Year of construction: 2020, We offer this second hand IWT Moldrup-SPP Hydro-Thermal Treatment Plant Industrial MOLDRUP-SPP plant designed for hydro-thermal modification of timber up to 2,600 mm diameter and 12,000 mm length. Built in heavy-duty stainless steel and engineered for continuous industrial production with fully automatic PLC control. Dwjdpoymxqajfx Akvoa Industrial Hydro-Thermal Wood Modification Plant – Ø2,600 x 12,000 mm Industrial hydro-thermal treatment plant designed for efficient and uniform thermal modification of timber in a controlled oxygen-free environment. The plant is built around a heavy-duty Ø2,600 mm × 12,000 mm stainless steel autoclave, handling approximately 15–22 m³ of timber per charge, with operating pressure up to 12 bar (abs). Fully automated via PLC, the system enables precise control of vacuum, pressure, temperature and multi-phase process cycles. The integrated vacuum system ensures safe oxygen removal, while the thermal oil heating system provides accurate temperature management throughout the treatment process. The complete installation includes pressure vessel, heating system, vacuum pump, circulation fan, condensate handling, trolley loading system and safety equipment. Thermal oil boiler skid and emission control equipment are included. Technical documentation available on request. The complete hydro-thermal wood treatment plant is sold as seen / as is. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Technical Data Faceplate diameter: 1580 mm Max. turning diameter: 1700 mm Djdpfx Akjwyn Ntjvswa Max. turning height (cross rail support): 1250 mm Max. turning height (side support): 1160 mm Max. faceplate load: 12,000 kg Max. distance from faceplate to underside of cross rail: 1210 mm Max. distance from faceplate to underside of side toolholder: 980 mm Max. distance from faceplate to underside of turret head: 1420 mm 18 spindle speeds: 2.8 – 140 rpm 18 feed rates: 0.063 – 3.15 mm/rev Total power requirement: 55 kW Required floor space approx.: 5300 x 3500 x 4100 mm Control: conventional

Condition: excellent (used), warranty duration: 6 months, type of input current: AC, ambient temperature (min.): 16 °C, electrical fuse: 16 A, input current: 2 A, input frequency: 50 Hz, ambient temperature (max.): 35 °C, total length: 2,500 mm, total width: 754 mm, overall weight: 400 kg, energy consumption: 12 kWh, Equipment: freezer, lighting, Fun Ice SRL is AHT representative in Romania since more than 25 years Dedpfxjrhwuae Akvowa AHT reseller of new and used equipments Quick delivery, worldwide AHT Kinley 210/250 cm (can be used as a freezer or refrigerator, medium and low temperature) !!! Fully tested and complete system (base + 2 rows of shelves) Refrigerant ECO R290 Ready to plug-in, easy installation LED internal light (canopy LED and doors LED lighting) Random units on stock - AHT Kinley / Epta or Carrier top freezers at 210 cm and 250 cm lenght Can be combined with AHT Miami or Athen XL LED cabinets (on stock in Oradea, Romania) All reconditioned AHT EQ series equipments are warranted for 6 (six) months for parts, with the exception of consumable and wear materials (refrigerant, gaskets, neon lamps, etc.) Any accessories and spare parts on stock

Condition: used, Year of construction: 1995, Overview The bottle washer "Sirio 7" from the German manufacturer MAG was built in 1995. Maintenance was carried out regularly by MAG. The machine can be inspected and tested in person. Technical details  Capacity up to 7,000 bph Bottle cells for 1.0 liter bottles (smaller bottles can also be used, but additional insertion plates are required) Diameter of bottles: 78 - 90 mm Bottle height: 288 - 310 mm Bottle cells per row: 10 Dimensions (LxWxH): 7,880 mm x 3,045 mm x 3,325 mm Empty weight: 14,300 kg Full load weight: 25,600 kg Installed power: 20.85 kW Heating system: Steam 3 bar Dwjdpfxetrbrqs Akvoa

Year of construction: 2026, condition: new, Our belt presses are equipped with two large pressing rollers that extend the pressing process, ensuring particularly gentle juice extraction. The result is a clear, foam-free juice of high quality. The pneumatic belt tension and automatic belt control guarantee consistently high quality throughout the entire pressing process. The belt press features an automatic brush cleaning system, eliminating the need for a high-pressure cleaner. The belt is cleaned by six specially designed water nozzles. For cleaning, only a compressor with 8 bar pressure and a ½” water connection are required. Thanks to these special nozzles, water consumption is reduced, leading to lower operating costs. The open design allows for quick and uncomplicated cleaning, which can be completed in just a few minutes. Technical Information: • Nominal capacity: 950 kg/h • Power requirement: 1 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h at 6 bar • IP65 electronic control cabinet • Juice yield: Up to 75% • Fully automatic and stepless control of belt speed • User-friendly • Easy to clean Djdpfx Aov Sq S Njkvswa • Rollable machine feet Dimensions: Length: 2230 mm Width: 1450 mm Height: 1250 mm Loading height: 1240 mm Pomace discharge height: 500 mm Juice outlet height: 370 mm Weight: 540 kg Optional: Juice collection tray ISW 100 Automatic juice discharge

Condition: used, Additional title: Brewing vessels with copper hoods and hop dispenser, whirlpool and wort cooling Capacity: 150 hl/brew Dwodjvcqufepfx Akvsa Operation / Control: ProLeit / Siemens S7 Material: brew house vessels copper-covered Features: mash/wort kettle, mash/lauter tun, hop addition, vapor condenser system, whirlpool, wort cooler, various pumps and fittings

Condition: new, Year of construction: 2026, The item is generally a project-based product or, depending on availability, available as a demonstration machine. The purpose of the labeller is to fully automatically label a cylindrical product. Description - Machine materials: 1.4301 and anodised aluminium alloy Dsdpfsq U Sihsx Akvswa - Control via Siemens PLC + HMI - Cylindrical products from Ø20mm to Ø110mm - Accuracy: ± 1 mm (excluding product and label faults) - Technical documentation provided via regional partners Label roll - Inner diameter: 76 mm - Outer diameter:

Condition: used, Year of construction: 2018, operating hours: 3,500 h, machine/vehicle number: LC636, Used filling KHS Innofill can line 16000 CPH - year 2018Technical Specifications & Performance DataThis complete used bottling line is a second hand beverage canning system engineered around a KHS can filler block, integrated with high-quality upstream and downstream packaging machinery. Designed for industrial packaging and beverage production, it delivers reliable performance for aluminum cans.Production speed: up to 16000 cph (cans per hour)Primary filler: KHS Innofill Can C (2018)Can seamer: Ferrum FC03 (2018)Depalletizer: SKA Fabricating Can-I-BusInspector: Heuft fill level detectorRinser: AV-C500 can air rinserDryer: Air Control Industries can dryerLabeller: Pack Leader (Advanced Dynamics system)Case packer: Atlanta Rafaello 726Case coding: SATO S86-EX printerConveyors: KHS and AE Conveyors, plus KBR outfeed belt conveyor with PCUtilities/auxiliaries: Conveyor lubricator (Loewados)Container type: Aluminum cansDocumentation: Hard‑copy manuals includedAdvanced Automation & Control SystemsThe line is equipped with dedicated control cabinets for conveyors and labeling, supporting coordinated start/stop logic and smooth product handling. The KHS Innofill Can C filler block provides modern automation architecture with line-friendly integration, recipe handling, and synchronized drives for consistent filling and seaming operations. Safety interlocks and guarding are present across key stations for operator protection and process reliability.Production Line Integration CapabilitiesThis packaging line offers end-to-end integration from depalletizing to case packing, enabling seamless flow of cans through rinsing, filling, seaming, inspection, drying, labeling, and secondary packaging. Modular conveyors by KHS, AE Conveyors, and KBR facilitate balanced accumulation and stable transfer, helping maintain throughput at rated speeds. The configuration is suitable for a wide range of beverage production scenarios and can be adapted to different aluminum can sizes with appropriate change parts and guides.Machine Condition & Maintenance HistoryAs a second hand used bottling line, the core process equipment includes 2018-generation KHS Innofill Can C filler and Ferrum FC03 seamer. The asset list indicates a complete, coherent set of stations with hard‑copy manuals available, supporting efficient commissioning, maintenance, and spare parts management. The line is presented in working condition and ready for operation, subject to standard site preparation and utilities.Operational Performance & VersatilityDesigned for high-efficiency can handling, the line features a SKA Fabricating depalletizer for automated infeed, an air rinser for internal container preparation, precise isometric filling via KHS Innofill Can C, and robust double seaming with the Ferrum FC03. Quality assurance is enhanced by a Heuft fill level detector. Downstream, an Air Control Industries dryer pre... Djdpfxsy Szbys Akvjwa