Hydraulic profile steel shear + punching machine

PEDDINGHAUS Peddicat 360 H

Condition: used, Year of construction: 2004, Technical details: Blsdpev Szwcjfx Aafoc current capacity: 630 kVA Voltage primary: 20 kV Voltage secundary: 400 V frequency: 50 Hz voltage: 400 V / Hz rated current: 18,2/24,2 A weight: 2,6 pro Gerät t dimensions L x W x H: 1,7 x 0,82 x 1,66 m This isn't a medium voltage plant! Protection class IP 00 Cooling type AN insulation class F - F with interior insulation Winding material Al / Al Ambient temperature = 40° C Application Rated voltage: 1. 21.000 V 2. 20.500 V 3. 20.000 V 4. 19.500 V 5. 19.000 V *

Condition: used, Year of construction: 2001, Cast resin epoxy distribution transformer 630kVA manufactured by TESAR Italy, voltage ratio 10000 ( ± 2 x 2,5 %) /400V, Dyn5 or Dyn11 or Dyn1, IP23 or IP00, forced cooling AF, conductor Al/Al, temperature monitoring unit, functional,available 2 pcs. Bedpfsquwtxox Aafslc

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Bledpekvnumofx Aafec Dimensions (Estimate) Length 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2004, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm number of spindle speeds: 63 - 3.150 1/min feed stepless: 12-3000 / 6-1500 (Z) mm/min quill stroke: 100 mm milling-head swivable +/-: 90° spindle taper ISO: SK 40 surface area: 630 x 400 mm total power requirement: 8 kW weight of the machine ca.: 2,2 t Blsdek Hdu Djpfx Aafec dimensions of the machine ca.: 2 x 1,9 x 1,95 m universal milling machine with point to point control, mechanical handwheels, swivel - rotary table (mech.) +-45°, hydr. tool clamping, half cabin, coolant device, manuals (German language) *

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 4,000 mm, overall weight: 820 kg, load capacity: 500 kg, The offer concerns the following set: (possibility to adjust device parameters or to purchase the vacuum lifter or jib crane separately) - Vacuum lifter for boards, suitable for handling MDF, laminated boards, raw boards, particle boards, etc. (model WOOD SYSTEM DS 250) - Stationary jib crane - Electric chain hoist - Manual trolley Features of the WOOD SYSTEM DS 250 vacuum lifter: - Designed for handling boards - Actuator for rotation between vertical and horizontal positions - 6 suction cups Ø 200 mm - Frame allows for adjustment of suction cup positioning to match the material being handled - Beam length: 2500 mm - Each suction cup is equipped with a ball valve for individual deactivation - Integrated air pulse function to prevent material adhesion - Individual X and Y axis adjustment for each suction cup - Control from the operating console (control panel): - Power on/off for the generator - Vacuum engagement/release - Thumb-operated control of the electric hoist – raising/lowering the lifter - Pressure gauge - Pneumatic supply – equipped with vacuum generators - Lifting capacity: 400 kg - Device weight: 100 kg - CE certificate Stationary jib crane Technical data: • Column height: 4 m • Height under the jib: 3 m • Jib length: 4 m • Lifting capacity: 400 kg • Slewing range: 270 degrees • Lifting speed: approx. 3 m/min • Colour: any RAL palette colour on request Bedpfx Asxln Drjafslc • Manual slewing • Manual trolley • Quadruple/double needle bearing on the jib arm for smooth rotation • Electric chain hoist • CE certificate INCLUDED IN THE PRICE: • Pillar jib crane • Electric hoist – single phase • Manual trolley • CE certification • Complete documentation Standard warranty: 12 months

Condition: ready for operation (used), Year of construction: 2010, Large semi-automated Pace cutting system Polar 137 XT-Autotrim with pile lifter, jogging system with count scale, gripper transport system, rotary gripper, and delivery unit Year: 2010 Approx. 5.43 million cuts Workflow: The material to be cut is raised to an optimal working height using a loading lift, placed into the jogger by the operator, automatically jogged, and then transported via the Autotrans gripper system from behind the jogger to the rear table of the high-speed cutter and rotated. Bsdpexd U Saefx Aafelc After cutting, the Transomat automatically stacks the layers onto a pallet, allowing continuous cutting operations. Polar Stack Lift LW 1200-4 Platform size: 80 x 126 mm Load capacity: 1200 kg Equipped with steplessly adjustable photoelectric sensors for automatic lifting and lowering. Jogger RAH-4 with air removal roller and unloading for rear-table feeding Working format up to 75 x 105 cm Unloading of the jogged cutting material occurs automatically to the rear into the STR stacking rack. The Autotrans gripper transport system then handles layer transport onto the rear table of the high-speed cutter. Sheet scale – Polar count scale Avery Weigh-Tronix For creating quantity-accurate cutting layers Gripper transport system POLAR Autoturn – clamp transporter for rear-table loading and rotary gripper Takes over the prepared cutting layer from the stack rack or buffer table Via air tables, which use air cushion for optimized material handling, the cut material is transported directly onto the rear table of the high-speed cutter and placed with precision. The cutting layer is held firmly by the grippers during transport, ensuring even pre-aligned layers remain precisely squared during movement. Cutting machine Polar 137 XT-AT with touch control And Autotrim function for automatic waste removal under the front table during cutting - Lowerable side gauge left (required for rear-table loading); also allows handling of formats with a diagonal of...

Condition: new, Vacuum lifter BARBARIC B3 swiveling, incl. crane - Exhibition unit - Including: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg Vertical and horizontal transportation of flat commercial commercially available boards (coated boards, natural wood panels) up to a panel size of 3,000 x 2,100 mm - a tilting range of 90° with pneumatic tilting mechanism - Complete with hoist and corresponding safety devices safety devices (vacuum manometer and manual manual slide valve with mechanical safety device) - uniWood traverse with 2 suction pads Ø 270 mm on an adjustable traverse (traverse length: 1,500 mm) Includes: - Optional reinforced BARBARIC uniWood version for easily permeable boards Load capacity: 250 kg Bedpsu R Szajfx Aafslc with 2 oval suction pads 500 x 250 mm on an adjustable cross beam (cross beam length: 1,250 mm) and reinforced vacuum pump for permeable sheets. The reinforced design enables lifting materials weighing up to 250 kg. Includes: - BARBARIC uniWood comfort operation option All controls for the lifting gear and for the vacuum the vacuum lifter are integrated in one control unit - our special handling handle is accommodated. This makes it possible to operate the system and guiding the load in one-handed operation. The lifting process can be steplessly controlled by a frequency converter. The comfort version comes complete with hoist and corresponding safety devices (vacuum pressure gauge and 2-button safety control for releasing the load). Includes: - BARBARIC column-mounted slewing jib crane Lifting capacity on the lifting device: 250 kg The lifting capacity is the specified working load on the lifting device. Barbaric slewing jib cranes are designed for handling tasks in all areas of application and are extremely lightweight. SSK consisting of column, bracket and smooth-running jib. jib. Slewing and trolley travel by hand. The prerequisite for attachment is a suitably concrete floor (C20/R5, min. 20 cm). The static inspection of the floor must be carried out on site and documented accordingly. For fastening on cracked concrete or less load-bearing substrate, we offer enlarged base plates enlarged base plates on request. Fastening: Supplied with adhesive anchor for concrete floor When ordering without lifting gear, please specify the cable or hose type! Delivery includes: incl. sliding trolley, power supply and compressed air connection. - new exhibition machine -

Year of construction: 2009, condition: ready for operation (used), machine/vehicle number: 527, Offer 23035 Technical data approx: - Pressure capacity 30 T. - max. sheet thickness 10 mm - max. punching diameter 105 mm - punching capacity - e.g. steel sheet : 105 mm in 1,5 mm ; 45 mm in 5 mm - e.g. VA - sheet metal : 90 mm in 1,5 mm ; 45 mm in 4 mm - stroke 7 - 70 mm - throat 560 mm - maximum stroke rate 120 H/min - single stroke / continuous stroke - drive 400 V / 4 kW - space requirement approx. W 8000 x H 1850 x D 1700 mm - weight approx. 1900 kg Bedpfx Aaslnkc Uefjlc - with: - stop table with stops - foot switch; - emergency stop button - punch quick change device - various receptacles for punches and dies

Condition: ready for operation (used), With hydraulic pump. Bedohw E D Sjpfx Aafelc

Condition: new, pressure 25 t throat 200 mm stroke 4 - 80 mm Blodpfxsb U Hwps Aafoc table surface area 520 x 400 mm no. of strokes 160 Hub/min ram surface 160 x 160 mm ram adjustment 40 mm ram hole 32 H7 mm hole in the table 200 x 150 mm clamping plate 500 x 380 x 60 mm total power requirement 2,7 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 1,3 x 1,0 x 1,85 m