Flatbed

Panhans 335A

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment and technical data: - User-friendly controls - Ideal working height - Large opening - Full access from all four sides - Push-button control - Stop button - Safety cable - EMERGENCY STOP at every location - Timer with acoustic signal - Pressure switch automation - Automatic temperature control system - Infinitely adjustable stroke limitation - Heavy-duty rack compensation - Energy-saving mode as standard - Switchable side cylinders - Total pressing force: 120 tons Bwjdpfx Adjy R Haxorsp - Plate dimensions: 3000x1350 mm - Number of cylinders: 6 - Piston diameter: 85 mm - Max. opening / stroke: 400 mm - Closing time: approx. 16 sec - Heating time to 80°C (from room temperature): approx. 14 min - Maximum permissible operating temperature: 140 °C - Total connected load: 20.1 kW - Hydraulic power: 1.21 kW - Fuse rating: 35 A - Dimensions: 3500x1610x2000 mm - Total weight: 6200 kg Availability: short notice Location: 63934 Röllbach

Condition: used, machine/vehicle number: 008116, Max. machinable height: 120 mm Max. forward feed speed: 25 m/min Bwjdpfx Aow Iddzjdrsp Operator shafts number: 6

Condition: used, functionality: fully functional, Klockner chipper 120x400 H-2WT - German production - shafts in very good condition Bwjdpfsthfm Uex Adrop TECHNICAL PARAMETERS: inlet width 400 mm inlet height 120 mm two knives rotor diameter 420 mm power of main motor 30 kW feed motor power 2 x 2,2 kW bottom shaft pulling toothed top pulling toothed shaft sieve fi 20 mm feeder length 2600 mm transport dimensions (length / width / height) 300 / 245 / 170 cm weight 1500 kg

Condition: new, Year of construction: 2025, functionality: fully functional, power: 5.5 kW (7.48 HP), planing width: 410 mm, tool diameter: 125 mm, number of blades: 4, rotational speed (max.): 5,000 rpm, total length of planing tables: 2,850 mm, TECHNICAL DATA Planing width 410 mm Feed table length 1620 mm Bwedpfjqk Ulujx Adrep Feed table length 1170 mm Total table length 2850 mm Cutterblock speed 5000 rpm Suction nozzle Ø 160 mm chip removal up to 8 mm Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 870 kg TECHNICAL DESCRIPTION Solid German engineering For planing and jointing incl. hollow and pointed joint adjustment for planing width up to 630 mm and max. chip removal up to 8 mm Ergonomic working position directly on the cutterhead PANHANS solid steel cutterblock ø 125 mm with 4 Tersa reversible knives Finely planed machine tables, total table length 2850 mm Top control panel at eye level with digital display of chip removal, current delivery table situation (neutral, hollow or pointed joint), incl. template holder and practical tool tray Electromotive adjustment of the feed table via push-button Hollow and pointed joint adjustment on the feed table Toothed table lips for noise reduction Dressing fence Adjustable in depth and inclination via single-lever operation, inclinable up to 45°, mounted in extremely smooth-running steel guide Anodized dressing fence ruler Pivoting auxiliary fence 1545 Console for feed unit TXF 1570 bridge guard with hinged cover Mechanical motor brake Automatic star-delta start, motor protection switch Planed in at the factory CE-compliant GS tested

Condition: reconditioned (used), Mortising machine, swing chisel mortising machine MAKA type DB 5 with many mortising tools, see pictures Workpiece stop 2 pieces Stop rail right / left 2150 mm Workpiece blow-out 2x Foot switch Pneumatic workpiece clamping on the side 1 piece Pneumatic workpiece clamping from above 2 pieces Extraction connection D 120 mm Bwjdpev Hm Nmsfx Adrep Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: used, Year of construction: 2000, Planing width: 410 mm Infeed table: 1620 mm Bodpszb N Tzofx Adrewp Outfeed table: 1170 mm Overall length: 2850 mm Electrically adjustable planing table with digital display Fence adjustable with auxiliary fence Motor: 4 kW Speed: 5000 rpm Space required: 2950 x 1260 mm Weight: approx. 850 kg Location: Supplier

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Tilting Spindle Moulder MAKA SF 4510 / GRIGGIO with Power Feed Very good condition, the machine comes from a small village carpentry shop with 3 people. Everything works perfectly. All bearings and guides are in excellent condition; the machine runs very smoothly. Equipped with a moulder fence, with one fence jaw adjustable in depth and featuring fine adjustment with scale, enabling jointing work, e.g., for a glue joint profile. The entire fence can also be adjusted via a set screw, allowing for very precise settings. With spindle locking via clamping lever. Chip extraction is very effective, with two 120mm diameter extraction ports on the fence and machine. Bedpfx Adey Rh Nzorswp Comes with a 30mm spindle, continuously tiltable from -5° to 45°, adjusted via handwheel, with a precise degree scale. Selectable clockwise/counterclockwise rotation. We deliver the machine in person anywhere in Germany for 220.00 EUR and carry out a demonstration, so you have no risk with your purchase. Delivery to other EU countries is also possible. Large table opening, adjustable with rings (this allows the use of cutters with a very large diameter and safe cutting with small cutters). Spindle speeds: 3200, 4200, 6000, and 8000 rpm. Spindle height adjustment via handwheel with locking screw. Spindle is exchangeable (a 40mm spindle can also be used). Optimal power transmission via V-belt drive. Machine table is 1070mm wide and 940mm deep. The machine is ready for immediate use. 380V, 5500W, with motor protection switch against overload. Year of manufacture: 1999. Weight: approx. 700kg. The machine has a CE certificate. Comes with manual, motor brake, and emergency stop switch, fully compliant with all requirements of the woodworking trade association (Holz-BG). Included is also a 3-roller power feed from HAFFNER with 8 speeds. Optimal, simple, fast, and safe operation.

Condition: good (used), Code: 0421 Brand: ORMAMACCHINE Model: NPC - CE Standard Bjdpfx Aezgtpisdrewp Hot press with diathermic oil heating for wood, joinery, furniture, custom-made furniture, panels, doors, composite materials and various – CE Standard Platen sizes mm 3000 x 1580 Solid steel platens with diathermic oil heating N° 6 pistons diameter 85 Opening mm 400 Platens heating by electric boiler Thrust 120 ton Guides side racks Mylar Overall dimensions mm 3700 x 1850 x 2600 h

Condition: new, Year of construction: 2025, The track chain links for multi-blade saws are cast from high-quality cast iron or steel castings, ensuring the superior quality of the finished tracks. The links can be equipped with additional carrier spikes. The track components—guides, pins, and bushings—are made from high-grade materials and undergo heat treatment and thermo-chemical processing. The feed accuracy of the track is achieved by a special machining method for the holes in the links. Upon request, we manufacture guides, breakers, sprockets, pulleys, and shafts. We design and produce tracks for multi-blade saws from all over the world, for manufacturers such as: A.COSTA, RAIMANN, TOS SVITAVA, REMA RESZEL, GABIANNI, PAUL, OGAM, and all models of Chinese tracks. Bwsdpewvp Ddefx Adrop