Printing press

Omso DM385/6 Box

Condition: good (used), Year of construction: 2008, - Max. turning diameter over bed: 700 mm - Turning length: 1,500 mm Csdjxmirgopfx Akcegt Main spindle: - Speed range: 2,800 rpm - Enlarged main spindle: Ø 150 mm, bore: 110 mm - Drive power: 30 kW, 900 Nm - Spindle nose: Size 11 Total power requirement: 59.5 kVA Approx. machine weight: 14.5 t Space requirement approx.: 6.4 x 3.0 x 2.6 m EQUIPMENT: - 3-jaw chuck, SMW KNCS-N 400 K11 - Tailstock - Programmable CNC steady rest slide (cross slide NOT retractable) - SMW-AUTOBLOK SLU-3, self-centering steady rest, clamping range Ø 12 - 152 mm - Full clamping cylinder for partial hollow clamping, draw tube bore max. Ø 100 mm - In-process measuring system Renishaw for X-/Z-/C-axis - Programmable CNC tailstock on W-axis - Drilling/milling spindle and C-axis 0.001° - Tool changer: 80 positions Tool system: HSK-A63 - Y-axis travel +115/-115 = 230 mm - B-axis 225°, positioning in 0.001° increments - ICS / internal coolant supply for driven tools - Synchronized thread cutting with driven tools - Software for use of multifunctional tools, e.g. special tool with radially arranged indexable inserts, which can be positioned in the drilling/milling spindle at 60°, 90°, 120° and 180° positions - Software for gear hobbing for straight and helical gearing with speed synchronization of main and milling spindles - Electrostatic extraction unit - Chip conveyor - Documentation - CE marking

Condition: excellent (used), Standard steam boiler 2000 kg/h 22 Bar (2166) oil or gas burner Cedpsxqr E Djfx Akcsgt

Condition: reconditioned (used), Year of construction: 2002, CNC vertical machining center MIKRON VCP 800 W With path control Heidenhain iTNC 530 Year of construction: 2002 Travels: X 800 Y 650 Z 500 Speed range: 0 - 20,000 rpm infinitely variable Csdpfxsviq U Es Akcsgt With the following accessories: Rigid angular table 900 mm x 600 mm clamping surface Vertical tool changer with 30 magazine slots (HSK 63) Fully protected cabin with sliding doors and interior lighting Electronic handwheel Tool measurement in the work area ( BLUM laser ) 3 D measuring probe infrared Renishaw Chip conveyor Coolant device 4 pcs. Height-adjustable machine shoes Operating instructions

Condition: good (used), Year of construction: 2014, operating hours: 18,520 h, Single-shaft shredder, especially suitable for secondary shredding and granulation of pre-shredded material. Application: Commercial waste for thermal or material recovery, e.g. paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Power Komet 1800 Year of manufacture: 2014 Control cabinet; complete with ABB frequency converter, Recooler Operator panel Hopper Drive motors: 200 kW Hydraulic unit: complete Total weight approx. 21 t Cedpfxswxmb Ej Akcogt Dimensions approx. LxWxH mm: 5000 x 2800 x 3000 mm Inspection: possible upon arrangement. Delivery time: immediate.

Condition: good (used), Year of construction: 2001, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,460 mm, table length: 3,800 mm, table width: 1,000 mm, table load: 30,000 kg, Chip conveyor Double doors front side Chain Tool chnager 30 positions Central lubrication IKZ 16 Bar and 2,2 kW Flow 16L/Min Tool blocking power 1968 daN Full set books and 1e owner machine X-Axis: 3200mm Y-Axis: 1200mm Z-Axis: 1460mm Table Length: 3800mm Table Width: 1000mm Table load: 30000 Power on spindle: 41kW Spindle speeds: 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 10659H Length: 8820mm Cgedpfx Aoxc Hh Djkcst Width: 6250mm Height: 3910mm Weight: 33000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 3,425 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 18,000 rpm, number of axes: 4, This 4-axis MECAL MC 305 vertical machining centre was manufactured in 2004. It features a powerful 5.5 kW electric spindle, air-cooled, with a maximum speed of 18,000 RPM and an ISO30 tool holder. The tool magazine is centrally located, protected, and supports various tools. It has a standard workpiece length up to 4000 mm and an extended range up to 8000 mm. Contact us for more information about this machine. Cgsdpsx D I Hkefx Akcot • A (rotation): ±125° • Spindle Type: Electric, air-cooled • Tool magazine: • Located in the middle of the machine base in a protected area • Accommodates various tools: milling cutters, taps, end mills, angle heads • Construction: • Welded steel structure for maximum rigidity • Linear guides with ball screws • Automatic central lubrication of guides and screws • Cooling: Centralized minimum lubrication system (MQL) • Working range: • Standard workpiece length: up to 4000 mm • Extended range (differential cycle): up to 8000 mm

Condition: good (used), Year of construction: 1991, x-travel 4000 mm y-travel 2500 mm z-travel 1200 mm Csdpfx Ajvwgmgokcsgt Control FIDIA M30 spindle 37 kW turning speeds 4500 U/min column daylight 2300 mm dist. milling spindle - table surface 1250 mm taper ISO SK-50 table dimension - longitudinal 3000 mm table dimension - cross 1500 mm The Ingersoll-Bohle 5-axis portal milling machine is in good condition and can be can be inspected by arrangement with the seller. Accessories: - High-frequency high-speed spindle 3.8 kW with 25,000 rpm. Description: - infinitely adjustable inclined axis milling head (speed 4500 rpm)

Condition: good (used), Year of construction: 2006, X 1000 mm , Y 600 mm Cgodpfxju Dmy Dj Akcot Parts shown by hand not come.

Condition: used, Year of construction: 2004, Technical details: Cgsdpfx Akouzbayocjt table length: 920 mm table width: 600 mm ampere: 13,2 A weight of the machine ca.: 6 t dimensions of the machine ca.: 2,46 x 2,24 x 2,33 m X-axis: 600 mm y-axis: 400 mm Z-axis: 260 mm max. table load: 1500 kg The dimensions for transport are: wide 2240 mm x high 2330 mm x deep 2460 mm weight approx. 6000 kg. *

Year of construction: 1990, condition: ready for operation (used), A CNC lathe Gildemeister is available. Swing diameter over bed/face slide: 600mm/360mm, bed dimensions X/Y: 350mm/450mm, carriage length: 620mm, carriage width: 250mm, facing travel: 1100mm, chuck diameter: 315mm, spindle bore: 107mm, spindle diameter: 140mm, spindle power: 30kW, torque: 950Nm, speed: 3150rpm, rapid traverse X/Z: 10m/min/5m/min. Quill diameter: 100mm, quill stroke: 180mm, max. tailstock pressure: 1200daN, turning length: 1000mm. Machine dimensions X/Y/Z: approx. 4350mm/2050mm/2000mm, weight: approx. 6400kg, operating hours: 49811h. Documentation available. An on-site inspection is possible. Cjdpfxjx R Duao Akcegt