Circular saw

OMEC TA185

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, saw blade diameter: 550 mm, total length: 4,920 mm, total width: 1,450 mm, total height: 1,200 mm, overall weight: 600 kg, Equipment: CE marking, documentation/manual, saw blade guard, OMEC TA185 band saw Maximum cutting height: 180mm Maximum cutting width: 900mm Saw blade diameter: 550mm Pneumatic material clamping Lsdpfxezu R Hhj Apmeaf Pneumatic saw blade feed Saw blade control via two buttons Main motor power: 5.5kW Machine dimensions: 492x145x120cm (H) Weight: 600kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, mobile circular saw for cutting bricks with extraction Ljdsv Ivx Tspfx Apmsaf

Condition: like new (used), functionality: fully functional, AUTOMATIC CUTTING SAW machine for solid wood model OMEC TA 185 second hand machine working condition : excellent CE mark: YES Lsdpfxszfggfe Apmeaf instruction booklet: YES cutting diagram . see attachment with rollers tracks ( as in photo ) n.01 stop max.blade diam.mm.550 motor power Hp 10 volt. 380/50

Year of construction: 1984, condition: excellent (used), Blade diameter: 550 mm Minimum cutting length: 500mm Minimum cutting width: 100mm Maximum cutting height: 160 mm Laodpfx Aolrtntepmef Minimum cutting height: 40mm Pneumatic clamps

Condition: good (used), Profile steel shear, profile shear, punch, punching machine, hole punch -Pressure force: 40 tons -Punching -scissors -cut -disengage -mechanical release -Foot switch: 1 -various stamps and dies -Dimensions: 800/1250/H1800 mm Laodpfxjcc Ubue Apmof -Weight: 1112 kg

Condition: used, 5-way combination profile steel shear, PEDDINGHAUS Type 210 AD/13 Machine No. 529A059, Year of manufacture approx. 1970 Punching unit: Punching force 60 tons Punch stroke 25.5 mm Punching capacity Ø 25 mm in 16 mm sheet metal Ø 20 mm in 19 mm sheet metal Overhang 365 mm Round bar shear: Cutting capacity, round 42 mm Square 38 x 38 mm Flat bar shear: Laedpfx Apji Duh Ismof Cutting capacity at shear angle 5° 150 x 13 mm or 200 x 10 mm Blade length 245 mm Profile steel shear: Shearing capacity, angle iron at 90° 110 x 10 mm Shearing capacity, angle iron at 45° 90 x 9 mm T-steel 110 x 10 mm Notching device: Rectangular notching up to 12 mm sheet metal Punch dimensions 85 x 50 mm Motor power 3 kW Mains connection 380 Volt, 50 Hz - Center-finding device via hand lever and centering device - Mechanical stroke release via hand lever - Flat bar shear equipped with 2° blade - Mechanical clamp on the profile steel shear, round bar shear and on the flat bar shear Space requirement L x W x H 1500 x 800 x 1900 mm Weight 2000 kg Good condition

Condition: excellent (used), Pendulum Saw Bottene Motor power: 3.7 kW, 380 V, 50 Hz Maximum saw blade diameter: 500 mm Cutting height: approx. 120 mm Maximum throat: 500 mm With roller table and longitudinal fence on the left, 3000 mm With roller table on the right, 1000 mm Extraction diameter: 120 mm Approx. dimensions (L x W x H): 4200 x 1150 x 1650 mm Weight: approx. 200 kg Lajdpfx Asydnitjpmjf Saw can be swiveled to the right Saw and roller table mobile Including saw blade Note for used machines: • Technical details and intermediate sale subject to change. • Prices are ex location and refer to self-collection – free loading at site! • The machine has been cleaned and function-tested. • All machines are sold as inspected, with no guarantee or warranty whatsoever. Buyers are welcome to inspect the machine on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: good (used), Offer 23477 Hydr. flat profile and bar steel shears and hole punch Technical data: - Flat steel shears cut up to 350 x 12 mm - Steel section shears - cuts L-steel 90° up to 100 x 10 mm - Steel bar shears - cuts round steel up to 32 mm - Notching device - Rectangular notcher 50 x 90 mm - Hole punch - punching force 550 KN - with stop table - throat depth 220 mm - punches holes in steel up to 32 Ø in 12 mm - Coordinate table Lajdpfx Aora Avdjpmof - manual stop - E. foot switch - Drive 400 V / 2.2 kW - Space requirement approx. W 900 x H 1750 x D 1700 mm - Weight approx. 1200 kg

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 00026, overall weight: 400 kg, Specifications: 8 bar 24 V 80 kN 3 K 150 E Lsdowrp Iuepfx Apmeaf The Arnold & Shinjo / Multipower Farger & Joosten C-Press is a powerful and versatile hydropneumatic riveting press, ideal for efficient and precise joining of components. Thanks to its robust design and reliable hydraulic technology, it allows for high force transmission in various riveting tasks, making it a valuable solution in manufacturing and assembly. The press stands out for its ease of use and flexibility, so it can be used in different production processes.

Condition: used, Hydraulic punching machine, punching frame for use with JOKA HP-S punching units Hydraulic hole punching machine, hydraulic press for punching tools Year of manufacture approx. 1995 Pressure capacity: 5 tons Stroke: 155 mm Stroke length: approx. 20 mm Punching unit width: max. 54 mm Punching unit height: max. 220 mm Lodpjltrmujfx Apmeaf Die holder: Ø 48 mm Motor power: 1.5 kW Mains connection: 230 volts, 50 Hz - for universal use with JOKA SW 20 or SWD 20 punching units - The outreach of the punching units can be larger and can be pushed back - Stroke activation via electric two-hand operation - Hydraulic unit HAWE, type HCW 4 / 2.5-B 1/400-1 - mounted on a frame base, mobile Space requirement L x W x H: 1100 x 800 x 1450 mm Weight: approx. 200 kg Good condition