Benchtop hardness tester

OMAG / AFFRI Group 903 RSD

Year of construction: 2024, condition: new, Universal testing machine H 5 TMNI (L) 250mm, extended Mechanical design: according to DIN EN ISO 7500-1 and ASTM E4 2 backlash-free ball screws, brushless drive motor, Fmax = 5 kN, stiffness 9.4 kN/mm 1 working area up to nominal load: Working area width: 420 mm Max. testing stroke without testing tools, adapters, and central measuring device: 1270 mm Max. testing area height (between lower fixed and moving crosshead) without testing tools, adapters, and central measuring device: 1325 mm Travel speeds: Testing speed 0.001 - 1200 mm/min up to nominal load Return speed 1200 mm/min Force measurement: Measuring range depending on the force measuring sensor used, 0.4 - 100% of the nominal load, Class 1 (optionally Class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of the force measurement depending on the integration time between: +/- 160,000 and +/- 900,000 digits. The machine is supplied with a factory test certificate. If a factory or DAkkS calibration is to be performed at the installation site upon customer request, this effort must be calculated separately. Crosshead travel measurement: Hsdpfx Asiq Hxvjggsu Incremental square-wave input with encoder monitoring, storage of the crosshead position Resolution of the crosshead travel measurement:

Year of construction: 2023, operating hours: 5 h, condition: as good as new (ex-display), functionality: fully functional, Universal testing machine H5TMCI 250mm Extended mechanical structure: 2 backlash-free recirculating ball screws, drive via AC servo motor, Fmax = 5 kN, stiffness 10 kN/mm 1 working area up to nominal load: working chamber width: 420 mm (optional extensions: +190mm / +330mm / +620mm) max. test stroke without test tools, adapters and KMZ: 1025 mm (optional extensions: +250mm / +500mm) Optional: conversion to floor model, required additional assembly: substructure table Travel speeds: Test speed 0.001 - 2000 mm/min at full load Return speed 2000 mm/min Hodpfxjmdpafe Aggsu Force measurement: Measuring range: in the range 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) (+/- 1 % of the displayed value according to DIN EN ISO 7500-1) Resolution of force measurement: +/-180,000 digits at 20ms integration time The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DKD calibration is to be carried out at the installation site, this expense must be invoiced separately. Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement:

Condition: like new (used), Year of construction: 2023, Technical specifications: Measuring range, X-axis: 400 mm Measuring range, Z-axis: 500 mm Max. tool length: 600 mm Max. tool diameter: ∅ 400 mm CNC control Dimensions (width x depth x height): approx. 1200 x 900 x 2100 mm Condition: Condition is almost like new, very little use. The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty. Hedpfxszrgdqs Aggou

Year of construction: 2009, condition: ready for operation (used), table load: 20 kg, Optical measuring machine manufactured in 2009. This TESA visio 300 dcc features a measuring range of 300 mm in the X-axis, 200 mm in the Y-axis, and 200 mm in the Z-axis. It includes a high-resolution CCD camera and interchangeable zoom optics for enhanced measurement capabilities. If you are looking to get high-quality optical measurement capabilities, consider the TESA visio 300 dcc machine we have for sale. Contact us for further details. Hjdeyn Efyjpfx Aggeu • Usage: Laboratory environment • Calibration: Regularly calibrated; last calibration in 2025 • Measuring range (approx.): • X-axis: 300 mm • Y-axis: 200 mm • Z-axis: 200 mm • Accuracy: • Measurement resolution: up to 0.5 µm • High repeatability in the micron range • Optical system: • High-resolution CCD camera • Zoom optics / interchangeable lenses (depending on configuration) • LED illumination: top and bottom (surface and contour lighting) • Table: • Granite measuring table • Power supply: 230 V / 50 Hz Additional equipment • PC-DMIS software (license included on USB dongle)

Condition: used, Other GARANT MM1 300 CNC Hjdex Tvi Uopfx Aggou

Condition: refurbished (used), Year of construction: 2015, operating hours: 180 h, functionality: fully functional, machine/vehicle number: H5KS, Universal testing machine, type H5kS Extended version by 254 mm With 5KN 500N load cells, screw-type clamping device up to 5kN, and Windows 10-11 software For tensile, compressive, bending, and shear testing, etc., in accordance with EN ISO 7500-1, ASTM E4. The H5kS is a universal testing machine designed according to the latest standards. The machine operates in accordance with the relevant EU radiation protection and safety guidelines (EN 50081-1, 72/23/EEC, EN 61010-1). The maximum voltage within the machine is 48 volts. Special features: • Large, easy-to-read liquid crystal display with backlight • Graphical or numerical display mode • Alphanumeric file input • Speed range 0.001 to 1000 mm/min (2.5kN) • Speed range 0.001 to 500 mm/min (5kN) • High return speed 0.001 to 1500 mm/min • Precise crosshead positioning • Robust load frame • Output of test results with mean value and standard deviation via printer • Wide selection of testing software under Windows for various standards • RS232 interface for use with computer systems • Accuracy of the force display of the load cell: 0.5% across the entire range • Accuracy of the displacement display: 0.001 mm • Equipped with a force and displacement alarm system • 32-bit motor controller • 20% digital weight adjustment during calibration of the load cell capacity • Automatic motor alarm for over- or undervoltage and overheating Specifications: • Force measurement accuracy: +/- 0.5% of the displayed force in the range of 2% to 100% • Accuracy of position measurement: +/- 0.01% or 0.001 mm • Accuracy of speed: +/- 0.005% of the selected speed • Operating temperature: 0 to 38°C • Humidity range: 10% to 90% Technical data: • Single-column table model • Maximum load: 5kN in tension and compression • Maximum travel: 1004 mm without clamping device • For further details, please refer to the brochure. Dimensions: Height: 1394 mm Hjdpszt S Hmofx Aggju Width: 490 mm Depth: 450 mm Weight: 102 kg Connection: Machine: 50-60 Hz - 2000 W Power supply: 220/240VAC

Condition: used, TECHNICAL DETAILS - Brinell tests 3000 Kg and 750 Kg, HB according to DIN EN ISO 6506-01 - Test height with table : 0 - 610 [mm] - Test height without table : 370 - 1.120 [mm] - Clamping surface on table : 500 x 600 [mm] - Clamping surface on sole : 810 x 1.425 [mm] - Reach : 310 - 1.095 [mm] - Arm swiveling : 220 [°] - Test group swiveling around its axis : 180 [°] - Vertical stroke of the test group : 750 [mm] - Floor space (except hydraulic unit) : 810 x 2.155 [mm] Hsdpfx Agsuhb Iuogsu - Height : 3.500 [mm] - Weight : 4.000 [kg] - Voltage : 3x 400 [V] - Frequency : 50/60 [Hz] - Installed power : 3,5 [kVA] EQUIPMENT - Control panel : Stiefelmayer - Optical measuring system : Zeiss - Measuring electronics HM-Control - 2 measuring rules of imprint size : Heidenhain - Warning lights : good / outside the tolerance range - Statistic function - Exit for PV printing - Table - Hydraulic unit

Condition: used, Year of construction: 2022, For more information, please contact us via email or submit your inquiry. Hodpfx Aezwnqvoggou

Condition: excellent (used), Professional height gauge from the renowned Japanese manufacturer Mitutoyo. The device is designed for precise height measurement and scribing on surface plates. This model offers a measuring range up to 600 mm and is equipped with a dial indicator and fine micrometric adjustment, ensuring very precise dimensional control. Hedpsy Dirqsfx Aggou The robust construction and high-quality workmanship characteristic of Mitutoyo guarantee repeatable and reliable measurements. — Technical data: • Manufacturer: Mitutoyo (Japan) • Measuring range: 600 mm • Mitutoyo dial indicator • Indicator scale division: 2.5 µm • Micrometric adjustment • Stable, heavy base • Clear measuring scale — Applications: • Measurement of component heights • Scribing on granite surface plates • Dimensional inspection • Workshops, tool rooms, quality control departments — Condition: Used, in good technical condition. Shows normal signs of use. Sold exactly as shown in the photos. — Scope of delivery: • Mitutoyo height gauge • Dial indicator • Micrometric adjustment mechanism

Condition: used, Zwick Type: HA 50 Dimensions: H 2685 mm x W 1040 mm x D 750 mm Footprint: 1600 cm² Technical data: Fmax: 50 kN Vmax: 1500 mm/s Maximum test chamber height: 1370 mm Test chamber width: 565 mm Accessories: Kistler force sensor 50 kN via NI-Labview Hydraulic power unit 280 bar Mounting surface: 415 cm² Hodjzil Uijpfx Aggsu Clamping device / specimen holder included (Universal flange, high-strength jaws for specimen holder) Computer + testXpert R V6.0.0 software Condition: used Scope of delivery: (See image) Weight approx. 1200 kg without frame, etc. (Subject to alterations and errors in technical data; all information provided without guarantee!) For further questions, please feel free to contact us by phone.