CNC Lathe

Okuma LB15

Condition: not inspected (used), turning diameter / mm turning length / mm control / Dkodpfxewz Ryqj Adueu total power requirement / kW weight of the machine ca. / t required space / m Machine runs intermittently. Has a thermal problem. When it has been switched on for 2-3 hours and the electronics have warmed up, the machine can then be switched on and works without any problems. Feature Typical value / description Machine type CNC lathe (horizontal, 2-axis) Centre distance approx. 500–1000 mm Turning diameter over bed approx. 400–500 mm Turning diameter over carriage approx. 200–300 mm Spindle speed up to 3500 rpm (variable) Spindle bore approx. 50 mm Tailstock partially available, sometimes automated Tool turret 8 or 12 stations Drive AC servo motors, depending on version All information is provided without guarantee. This information is for guidance only. Further information is available on request.

Year of construction: 1995, condition: ready for operation (used), - USED- 2-AXIS CNC LATHE MAX ROTATING DIAMETER: 530 mm Dkjdpjiidpyefx Adueu MAX TURNING LENGTH: 500 mm MAX TURNING DIAMETER: 340 mm BAR CAPACITY: 62 mm SPINDLE: 3800 rpm; 11-15 kW; ASA A2-6" X-AXIS TRAVEL: 260 mm Z-AXIS TRAVEL: 520 mm RAPID FEEDS X-Z: 15 - 20 m/min TURRET HEAD: 12 POS CONTROL UNIT: OKUMA OVERALL DIMENSIONS: 2815 x 2815 x 1745 mm ACCESSORIES: SWARF CONVEYOR ; TOOL SETTER

Condition: ready for operation (used), Three Okuma CNC horizontal lathes are available. 1) Okuma LB 15 M. 2) Okuma LB 15. 3) Okuma LB 15 W. The Okuma LB 15 W is defective. On-site inspection is possible. Individual sale possible. Dkedpjwmdv Nofx Aduou

Year of construction: 1998, condition: ready for operation (used), Control Unit Brand Okuma Dsdpfx Adswx Szweuoku Model OSP 7000L Turret Number of turrets 1 Tool taper VDI40 Media Chip conveyor Yes Additional Equipment Robot interface In-process measuring Bar feed HYDRO-SAMECA QS 7.52 with diameter reduction tubes: 53, 46, 40, 34, 27, 22, 17 mm SAMECA bar feeder QUICKSAM 7.52 complete with a basic unit Max. Capacity 52 mm, length 3100 mm, Total length 4900 mm Drum with guide tubes capacities: 16, 20, 26, 32, 38, 45, 52 mm Hydraulic unit Capacity 80 liters With tailstock This Okuma LB15II was manufactured in 1998. It features a 12-position VDI40 turret, chip conveyor, OKUMA OSP 7000L control, and a SAMECA bar feeder. Additionally, it includes a robot interface, in-process measuring, and a programmable workpiece chute. If you are looking to get high-quality turning capabilities, consider the Okuma LB15II machine we have for sale. Contact us for more information about this machine. Application Types Turning

Condition: repair required (used), turning length: 400 mm, spindle bore: 75 mm, spindle speed (max.): 3,800 rpm, General information about the machine We are offering a used lathe from the manufacturer Okuma. The machine is offered as a spare parts carrier. The machine is running but not all functions can be guaranteed. The keys for operation are missing. The machine is in our warehouse and can be inspected under power Technical data - CNC control: OSP 5000L-G CNC system (German) - Tool turret: 12 positions - Lathe chuck: 250 mm - Spindle: 70-3800 rpm (11 kW, 30 min; 7.5 kW - continuous operation) Djdpfx Adougmzkeuoku - Spindle bore diameter: 75 mm - X-axis travel: 400 x 0.001 mm - Z-axis travel: 500 x 0.001 mm - Cutting speed XZ: 0.01-1000 mm / U - Rapid traverse up to: 12,000 mm / min. - Power supply: 380V - Rated power of the machine: 21 kVA - Maximum load current: 36A - Machine dimensions (width x depth x height): 3.9 m (with chip conveyor) x 1.8 x 1.8 m - Machine weight: 4500 kg

Condition: used, Year of construction: 1996, functionality: fully functional, travel distance X-axis: 260 mm, travel distance Z-axis: 1,020 mm, spindle motor power: 15 W, rapid traverse X-axis: 15,000 m/min, rapid traverse Z-axis: 20,000 m/min, OKUMA LB15II-MW CNC Turning Center The OKUMA LB15II-MW is a dual-spindle CNC turning center with a driven tool turret, designed to ensure high precision, flexible productivity, and complete machining in a single setup. Perfect for complex turning operations and series production. General data: Year of manufacture: 1996 CNC control: OKUMA OSP7000L Machine weight: 5,900 kg Dimensions (LxWxH): 3,315 x 1,895 x 1,905 mm Machining capacity: Max swing over bed: Ø530 mm Max turning diameter over cross slide: Ø340 mm Max turning length: 1,000 mm Distance between centers: 1,020 mm Spindle bar capacity: Ø62 mm Axes and travels: X axis: 260 mm Z axis: 1,020 mm C axis: 0.001° (full 360° continuous control) Spindles: Main Spindle: Speed: 45 – 4,500 rpm Spindle nose: ASA A2-6 Power: 11/15 kW (cont. 20/30 min) Sub-Spindle: Speed: 45 – 4,500 rpm Spindle nose: ASA A2-5 Power: 7.5/11 kW Turret: 12 stations (powered tool positions available) Tool dimensions: 25 x 25 mm / Ø40 mm boring bars Dkedpswxypiofx Aduju Powered tool speed: 3,000 rpm Included tooling: 17 fixed tools (10 boring bar holders + 7 external turning holders) 6 powered tools (3 angle heads + 2 double axial + 1 single axial) Feed rates: X-axis rapid traverse: 15,000 mm/min Z-axis rapid traverse: 20,000 mm/min Equipment and accessories: LNS MOVE bar feeder, capacity up to 3,200 mm Mayfran chip conveyor Coolant tank with wash-down pump High-pressure pump with integrated tank Tool presetting arm Manuals, electrical diagrams, and CE declaration A complete and compact solution, ideal for bar machining and secondary operations on the sub-spindle. The presence of the driven tool turret enables complex processes in a single cycle, reducing both machining and setup times.

Condition: used, turning diameter 530 mm turning length 500 mm control OSP 700 L-G Description of features Machine type CNC lathe with milling unit (C-axis + driven tools) Machining axes X, Z and C-axis (C for rotating workpiece) Tool turret 8-12 stations, with driven tools Turning diameter above the bed: 530mm Turning diameter above the slide: 530mm Turning diameter above the cross slide: 340mm Centre distance: 500mm Spindle speed approx. 50 - 3500 rpm Driven tools For drilling, milling, thread cutting on the workpiece circumferential surface C-axis Enables positioning in angular degrees (e.g. milling on circumference) Spindle bore approx. 50 mm Machine weight: approx. 5080kg All data without guarantee. This information is for guidance only. For further information, please contact Dodpfx Aewugr Aodusku . Translated with (free version)

Condition: good (used), Year of construction: 1997, Technically in good condition and functional. Year of manufacture 1997. Max. turning diameter 250 mm. Max. diameter over bed 530 mm. Dkjdswn Dbnspfx Adusu Max. turning length 500 mm. Length x Width x Height approx. 3315 mm, 1895 mm, 1900 mm. Machine weight approx. 6 tons.

Condition: not inspected (used), Seriennummer: 0697 Dedowm Rrqepfx Aduoku