Lump breaker

NNP Kibbler

Condition: new, functionality: fully functional, empty load weight: 2,600 kg, maximum load weight: 900 kg, overall weight: 3,500 kg, axle configuration: 2 axles, suspension: other, color: silver, Car trailer with twist-lock locking mechanisms for 20 ft containers. LED lighting, wheels 155 R12C 5x112, tandem axle, 3500 kg permissible total weight, unladen weight approx. 650-700 kg, hot-dip galvanized, 4 leveling jacks, license plate holder. Includes registration documents, 100 km/h approval possible! Wooden platform available at an extra cost! New 20 ft office container (Containex), exterior color: RAL-9010 pure white, forklift pockets, wall insulation mineral wool 60 mm, roof insulation mineral wool 100 mm, floor insulation mineral wool 100 mm, container interior height 2540 mm, 1 x 2 kW convector, 2 x 43 W LED wall-mounted light. Total weight of trailer + container: 2600 kg. A payload of 900 kg is still possible! Fjdpfsi Ha Eysx Akvsgf

Year of construction: 2014, condition: ready for operation (used), Max. output: 370kg/h, connected load: 0.25kW, length: 950mm, width: 950mm, height: 1115mm, weight: 75kg, including automatic filling, frame, valve, inspection shaft and documentation. Fodpfxoh Akm Te Akvjgf

Condition: excellent (used), Power generator 85 kVA IFA – German production TECHNICAL PARAMETERS: diesel IFA 6VD14.5 / 12/2SRW engine generator VEB DGA 68/5 Fsdoivtazjpfx Akvjgf engine power 68 kW generator power max 85 kVA liquid-cooled engine six-cylinder dimensions (length / width / height) 270 / 120 / 210 cm weight 1300 kg

Year of construction: 2026, condition: new, The fruit washer with a mill for fruits and vegetables is made entirely of stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. The fruits are immersed in water for a pre-wash. Afterwards, they are transported further via the conveyor belt, which thoroughly cleans the fruits with fresh water. After cleaning, the fruits enter the mill, where they are processed with the desired sieve to achieve the required mash consistency. • Easy to clean • Low maintenance requirements • Belt speed is steplessly adjustable in both directions • Equipped with 2 swivel wheels Fjdov Srgujpfx Akvogf • Equipped with 2 fixed wheels Technical Information • Nominal capacity: 2000 kg/h • Power requirement: 3 kW, 400 V, 10 A • Mash discharge height: 1400 mm • Connection for washing tank: G 6/4” • Connection for cleaning: G ½” • Material: WNr. 1.4301, AISI 304 stainless steel • Water consumption: approx. 12 L/min Dimensions: Length: 2700 mm Width: 840 mm Height: 2270 mm Weight: 150 kg

Year of construction: 2022, condition: new, Rental unit A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Fgjdpfx Aoh Utyrokvjf Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental unit Hosokawa Alpine A FC 200 Flakecrusher. The Alpine AFC Flake Crusher is used to gently grind brittle and easily breakable materials in order to reduce their size. It can obtain low dust granulates thanks to its gentle crushing process controlling the maximum permissible top cut while avoiding the generation of undesired fines. It´s used for coarse milling and can reach particle sizes between 0,5 and 10 mm depending on the feed product. The AFC can be used for mixture homogenization, flakes granulation, disintegration of agglomerates, increasing bulk density and flowability of clumped materials. It´s fitted with a rotating grinding tool which can work in combination with a sieve of choice to adjust the resulting product according to specification. The sieves exchange is quite fast reducing the unit´s downtime. Suitable for different industries such as pharmaceutical, food, chemicals, etc. Material of construction: stainless steel Without wear protection Non gas tight Non Pressure Shock Resistant (NPSR) Scope: Flake Crusher, motor, controls and screens according to requirements

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: NVT, type of input current: DC, warranty duration: 24 months, overall weight: 30 kg, filling weight (max.): 30,000 g, input voltage: 220 V, pressure: 2 bar, tank capacity: 30 l, New filling machine that can be used for filling liquids. This includes: Milk Water Alcohol Disinfectant Etc. A very robust machine that operates on air and 220V, plug and play! Ideally suited for filling small batches. A very small compressor is sufficient to get this machine running. This can also be supplied with the machine. For this, we recommend a minimum 12L version. Fgsdpfxsrivxce Akvsf The filling machine has a 1000ml cylinder, allowing it to fill a maximum of 1000ml per stroke. By having the machine perform multiple strokes, multiples of this amount can also be filled easily. For example, 2500ml can be filled by performing two strokes of 1250ml each. The smallest stroke is 100ml, and any amount between 100 and 1000ml can be filled in a single stroke. We also have models with a cylinder that can fill up to 5000ml per stroke. Equipped with a suction hose, allowing the machine to draw directly from a drum or IBC. The machine is equipped with a foot pedal and an automatic mode. In automatic mode, the machine continuously fills, allowing for easy and quick filling of larger quantities. The foot pedal allows filling at your own pace. Depending on the operator and the amount of milliliters, between 15 and 25 units can be filled per minute. This makes it a very fast machine. The machine weighs approximately 15/20kg and can be easily placed on a table. It is entirely made of stainless steel, making it a very high-quality machine. If you have any questions, please email us, and we will be happy to assist you with this or another machine. We also have a labeling machine that is a very good complement to the filling machine. We strive to respond to you within 24 hours. We are also available by telephone. We are happy to assist you on working days between 08:30 and 17:00.

Year of construction: 2014, condition: used, Mobile loading ramp Load capacity: 10 t Hydraulic height adjustment: 1100-1800 mm + additional support legs Weight: approx. 2.5 t Length: 10.5 m (folded) Width: 2 m Height: 1.7 m Location: 37235 Hessisch Lichtenau Sale on behalf of customer Fodpfx Aeyzw H Dskvsgf All information provided without guarantee

Condition: excellent (used), Dissolver Loher EC 10-6 Previously explosion-protected design Fedpfxjiu H S Tj Akvogf Power: 5.2 kW

Condition: ready for operation (used), Used heatable/coolable pressure vessel with Atex agitator and insulation Last intended use: Pharmaceuticals, cosmetics Article number: 10815 Volume: 5600 liters Type: standing on 4 feet Material (in contact with media): 1.4571 / AISI316 Design: with double jacket and insulation Operating pressure according to nameplate: +1/+3 bar Max. operating temperature: 0/ +150 °C Container dimensions: Manhole: 500mm Outer diameter: 2000mm Total height: 2870mm Total width: 2250 x 2060mm Cylindrical height: 2000mm Materials: Fedpfx Astdgkxskvegf Inside: 1.4571 / AISI316 Outside parts: 1.4301 / AISI304 Facilities: Nameplate: Yes ATEX agitator Power: 22KW Speed: 1465/min Agitator: Propeller 2x spray head Connector

Condition: new, Year of construction: 2014, functionality: fully functional, power: 22 kW (29.91 HP), Unused inline mixer from Ystral Built-in frequency controller Fgedsvkpqhspfx Akvef Top machine