Lead/traction spindle lathe

NARDINI MS-175 E

Condition: good (used), functionality: fully functional, turning diameter: 360 mm, turning length: 700 mm, total length: 1,800 mm, total width: 900 mm, total height: 1,600 mm, overall weight: 1,000 kg, center height over top slide: 120 mm, NARDINI MS 175 E Lead and Feed Screw Lathe TECHNICAL DATA & FEATURES: - Operating voltage: 380 V - Frequency: 50 Hz - Control voltage: 220 V - Power connection: 4.8 kW Fpjdpfx Afew U Tr Ijion - Spindle bore: approx. 48 mm - Centre distance: approx. 700 mm - Centre height over bed: approx. 180 mm - Swing over bed: approx. 360 mm - Centre height over cross slide: 120 mm - Swing over cross slide: 240 mm - The machine is equipped with a tailstock, a Multifix quick-change tool holder, a quick-action chuck, various steady rests, and a digital readout - REFERENCE NUMBER 18 DIMENSIONS & WEIGHT: - 1800 x 900 x 1600 mm - 1000 kg COLLECTION NOTES: - The item will be available from September 2025. A collection appointment must be scheduled on a specific day starting from 01.09.2025. - FCA: 73235 Weilheim an der Teck (DE), loaded onto truck

Condition: good (used), Year of construction: 1991, machine/vehicle number: DO-JAO-011, Offer 24306 Technical data: Fpodpfx Aot H I Uyjfijn - Center height 175 mm - Turning diameter 330 mm - Center distance 800 mm - Spindle holder according to DIN - Spindle bore 46 mm - Taper of the tailstock quill MK 3 - Travel of the tailstock quill 120 mm - Spindle speeds 6.3 - 2500 rpm - Longitudinal + flat feeds - Drive 400 V / 6 kW - with: - 3-jaw chuck - SWS steel holder with 1 insert - chip tray - coolant device - lighting - Space requirement approx. W 1850 x H 1750 x D 990 mm - Weight approx. 850 kg

Condition: used, Year of construction: 1994, turning diameter over bed 350 mm turning diameter over slide rest 310 mm turning length 700 mm total power requirement 4,6 kW weight of the machine ca. 1,0 t Dimensions (HxWxD) 2.200 x 1.300 x 1.175 mm --> Technical data Centre height: 175 mm --> Centre width: 800 mm --> Swing diameter over bed: 350 mm --> Swing diameter over support: 310 mm --> Gap length in front of the faceplate: 145 mm --> Cross slide travel: 205 mm --> Top slide travel: 100 mm --> Tool cross-section: 20x20 mm --> Bed Width: 220 mm Fjdpfxswc Dzwo Afiopn --> Height: 300 mm --> Headstock Spindle bore: 46 mm --> Spindle nose: DIN 55027-5 --> Spindle inner taper: 1:20 --> Tool holder: MK-3 --> Spindle speeds: 18 --> Speed range: 25 - 2000 rpm --> Tailstock Quill diameter: 50 mm --> Quill inner taper: MK-3 --> Quill travel: 140 mm --> Lateral adjustment: 10 mm --> Feed range Number of feeds: 256 --> Longitudinal feeds (128): 0.042 - 0.929 mm Rev --> Cross feeds (128): 0.015 - 0.338 mm Rev 3 - jaw chuck Multifix steel holder size B, 1 x inserts 2 x travelling steady rest, Operating instructions

Condition: good (used), Internal Article No.: 25013 Leadscrew and Feedshaft Lathe Nardini MS 175E Year of manufacture: 1986 Fpodpfswdu R Sex Afisn The machine is equipped as follows: + 3-jaw Röhm chuck 160 mm - Multifix tool post incl. 2 x tool holders - MK3 drill chuck - 2 x revolving centre - Operating manual / electrical wiring diagram - Collet chuck 185E, incl. one collet - 2 x steady rest - Chuck flange - 6 machine feet Technical data: Centre distance: 800 mm Centre height: 175 mm Tailstock quill: MK3 Tailstock quill travel: 130 mm Total power requirement: 4.8 kW (380V / 16A) Spindle nose: DIN 55022 / Size 5 Spindle bore: 46 mm Speed range: 25 - 2000 rpm Bed width: 220 mm Dimensions (LxWxH): 220 x 150 x 120 cm Weight: approx. 1000 kg The machine is fully functional and can be inspected under power by prior arrangement.