CNC Turning and milling center

Nakamura-Tome NTJX

Year of construction: 2007, condition: ready for operation (used), - USED - 8-AXIS CNC LATHE WITH MILLING HEAD, DOWN TURRET HEAD AND COUNTER SPINDLE DISTANCE BETWEEN CENTRES: 210 - 1290 mm MAX TURNING LENGTH: 1090 mm MAX TURNING DIAMETER: 245 mm Ksdpfx Apozqwf Ajmona BAR CAPACITY: 65 mm SPINDLE: 4500 rpm; 11-15 kW; 221,5 Nm COUNTER SPINDLE: 6000 rpm; 7,5 - 11 kW HEAD: HSK A63 ; ± 115° ; 8000 rpm; 3,7 - 5,5 kW X1-AXIS TRAVEL: 455 mm X2-AXIS TRAVEL: 222,5 mm Y1-AXIS TRAVEL: ± 70 mm Y2-AXIS TRAVEL: -20+50 mm Z1-AXIS TRAVEL: 1090 mm Z2-AXIS TRAVEL: 1005 mm B-AXIS TRAVEL: 1080 mm RAPID FEEDS X-Y-Z: 16 - 6-16 - 40 m/min DRIVEN TURRET HEAD: 12 + 12 POS; 6000 rpm; 3,7 - 7,5 kW TOOL MAGAZINE: CHAIN-TYPE ; 40 POS HIGH PRESSURE COOLANT: 25 Bar CONTROL UNIT: FANUC 31i-A BAR FEEDER: LNS Mod. Hydrobar Sprint S3 WEIGHT: 16000 Kg OVERALL DIMENSIONS: 5551 x 2925 x 2755 mm ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; PIECE CONVEYOR

Condition: good (used), Year of construction: 2003, Swing diameter 176 mm Turning length 570 mm Diameter over cross slides 510 mm Working diameter 420 mm Travel - z 570 mm Travel - x 245 mm Spindle bore 43 mm Tailstock diameter 85 mm Tailstock quill travel 120 mm Spindle speed 60-6,000 rpm Rapid traverse rate in X and Z direction 24 m/min Control system MSG-805 V Total power consumption 5.5 kW Machine weight approx. 3,400 kg Space requirement approx. 2000x1700x1800 mm Operating hours: 4,256 h Knsdjzk D E Aspfx Apmsa

Condition: good (used), Year of construction: 2011, Machine is in very good working condition. Descriptionis and technical details are on photos. Knsdpfsx I Rkpox Apmoa

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, total height: 2,300 mm, total length: 4,000 mm, total width: 2,400 mm, overall weight: 8,200 kg, Model: PUMA 350 A Year of manufacture: 2000 Kedpfx Apjzufknemjna Control system: Fanuc 18-TC Spindle speeds: 30 – 3000 rpm Bar diameter: 160 mm Chuck diameter: 305 mm Swinging diameter over bed: 700 mm Swinging diameter over slide: 480 mm Turning diameter: 550 mm Turning length: 1050 mm Spindle bore: 102 mm Spindle nose: A2-8 Rapid traverse X-axis: 16,000 m/min Rapid traverse Z-axis: 20,000 m/min Travel X-axis: 362 mm Travel Z-axis: 1105 mm Max. bar diameter: 91 mm Number of tool positions: 12 Dimensions (L x W x H): 4000 mm x 2400 mm x 2300 mm Weight: 8200 kg

Condition: ready for operation (used), Year of construction: 2001, Travel X/Y/Z: approx. 1020mm/510mm/500mm, table dimensions X/Y: approx. 1150mm/490mm, max. table load: 900kg, tool holder: SK40, tool positions: 22, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2850mm/2200mm/2750mm, weight: approx. 3900kg, control: Heidenhain TNC 410P. Documentation available. An on-site inspection is possible. Individual sale possible. Kedpjy E S D Sefx Apmena

Condition: ready for operation (used), Year of construction: 2001, operating hours: 10,631 h, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 410, total height: 2,700 mm, table load: 500 kg, overall weight: 4,200 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 13,000 W, tool weight: 7,000 g, number of axes: 3, This 3-axis Bridgeport VMC 1000 22 was manufactured in 2001. It features a working area X travel of 1020 mm, Y travel of 610 mm, and Z travel of 610 mm. The machine includes a robust table size of 1150 x 580 mm with a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 1000 22 vertical machining centre we have for sale. Contact us for further details. • Table: 1150 x 580 mm; T-slots 5x; T-slot size 18 mm • Spindle torque up to 110 Nm • Tooling: holder SK 40 DIN 69871; tool changer 22 stations (optional 30); max tool Ø 75 mm; max tool length 250 mm; tool change time approx. 5.2 s • Axis speeds: rapid X/Y 40,000 mm/min; rapid Z 30,000 mm/min; feed 1–12,000 mm/min; acceleration 6 m/s² • Accuracy: positioning ±0.005 mm; repeatability ±0.002 mm • Coolant system: tank capacity 450 l; pump capacity 70 / 140 l/min • Electrical: 400 V, 3-phase, 50 Hz; full load current 30 A; fuse protection 63 A; connected load approx. 20 kVA • Pneumatics: compressed air 6 bar; consumption approx. 80 l/min • Machine size/weight: dimensions 2830 x 2360 mm; transport with Chip conveyor weight approx. 4700 kg • Spindle operating time: 10,631 h Ksdpfx Apjy D N Aismona Additional equipment • Chip conveyor (included) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 1992, A Bridgeport CNC vertical machining center is available. Travel X/Y/Z: 1020mm/510mm/500mm, rapid traverse: 40m/min, feed rate: 10m/min, table dimensions X/Y: 1150mm/490mm, max. table load: 900kg, tool holder: BT40, tool stations: 30, machine dimensions X/Y/Z: approx. 2700mm/2550mm/2450mm, weight: approx. 3800kg. Documentation vorhanden. An on-site inspection is possible. Ksdpsyw Sv Sjfx Apmena

Condition: used, Year of construction: 2014, control FANUC Series Oi-TD greates pass round over bed 670 mm swing diameter over slide rest 500 mm max. turning diameter 400 mm max. turning length 600 mm spindle nose A2-8 spindle passage 90 mm diameter in the front bearing 130 mm spindle tunring speed 35 - 3.500 U/min Knodpfx Apszvzausmsa number of tool places 12 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: good (used), Year of construction: 2003, functionality: fully functional, turning length: 450 mm, turning diameter: 310 mm, CNC control Fanuc O-TC 12-fold revolver (VDI30) 3-jaw chuck main spindle 3-jaw chuck sub spindle chip conveyor Ksdpozvlnvsfx Apmsna tool measuring device coolant device Technische Daten / technical details: Umlaufdurchmesser über Bett / rotary diameter over bed 500 mm Umlaufdurchmesser über Planschlitten / rotary diameter over sledge 310 mm max. Drehdurchmesser / max. turning diameter 310 mm max. Drehlänge / max. turning lenght 450 mm X-Weg / X-travel 200 mm Z-Weg / Z-travel 450 mm Drehzahl / spindle speed 4500 UpM /rpm Werkzeugrevolver / turret head 12 fach /holes Stangendurchlass Hauptspindel / bar diameter main spindle 50 mm Eilgang X / rapid feed X 24 m/min Eilgang Z / rapid feed Z 30 m/min. Antriebsleistung Hauptspindel / drive capacity main spindle 11/9 kW Gewicht der Maschine ca. / weight ca. 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 810 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: 828D, spindle speed (max.): 10,000 rpm, This Saeilo Contur MMV 810 S vertical machine center, manufactured in 2012, features a Siemens 828D control system with an electronic handwheel for precise operation. It has 6224 duty cycle hours and 1821 spindle hours. The traverse paths are X = 810mm, Y = 400mm, Z = 500mm, with a 900 x 400mm table featuring 3 T14 slots. It includes a double arm tool changer with 20 slots, a BT-40 tool holder, and a high-performance spindle reaching 10000 rpm with oil cooling and a 20 bar internal coolant supply. Contact us for more information. Additional equipment Knjdpfezvvvkjx Apmea • Double arm tool changer with 20 places • Tool holder: BT- 40 • Spindle oil cooling // Internal coolant supply 20bar • Disc skimmer in coolant tank • Blast air cooling through spindle or from outside • Coolant gun • Spiral chip conveyor • Central lubrication of the guides Machine Benefits Technical Machine Benefits • Duty cycle machine: 6224 hours, duty cycle spindle: 1821 hours • Table clamping surface: 900 x 400mm with 3 t14 slots Extra Information Machine still under power