CNC CONTROL COPYING BAND SAW

MZ PROJECT UNIDUE 013 CNC

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, * Wemhöner Basic 1000 Plus - Year of manufacture: 2008 - Very good condition, little used * Type: KT-MB-28/15-240 * With automatic pin system and inline turn-over device * 2 tables with automatic variable pin system * With Teflon coating for pre-glued foil * Foil laying system for the pin table (pre-glued foil) * Heating plate size: 2800 x 1500 mm Fpsdsxbcudepfx Akvjk * Maximum workpiece size: 2,540 x 1,250 mm * Membrane: Yes * Cutting station * Foil paternoster storage, 3.2 m height with 14 suspension rods * Siemens S7 PLC control * Operator panel for PLC control: SIEMENS TP 270 (touchscreen) * Automatic membrane tensioning * Installed power supply: 38.5 kW * Maximum chamber pressure: 6 bar * Maximum press opening: 150 mm * 6 cylinders with Ø 125 mm * Operating voltage: 400V 50/60Hz * Press chamber height: 40 / 60 mm * Max pressing force: 2400 kN * Hydraulic system operating pressure: 320 bar

Condition: used, Year of construction: 1997, Line 3 Stenner MHS9 machines from 1997 Fodpfx Ajw Nrhkokvepk

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) Fodoiidm Nspfx Akvopk - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: excellent (used), Weinig Unimat 23 EL four-sided planer Fpodpjrb An Uefx Akvsk Working width 230mm Working height 160mm Head arrangement: Bottom 5.5kw Right 4kw Left 5.5kw Right 4kw Top 11kw Bottom 5.5kw Top 7.5kw Bottom 7.5kw Feed speed adjustable on variator 6-36m/min Feed driven by cardan shaft Rollers driven in table Pneumatic pressure pads CE certificate Year of production 2003

Condition: good (used), Year of construction: 1998, High-performance shredder with 1.2 m rotor width Large rotor diameter of 368 mm with 64 blades 37 kW motor Fjdpjxwwvusfx Akvepk Engine and gearbox replaced 6 years ago

Condition: new, Technical data: Working width: 970 mm Grinding width: 950 mm Working height: 3 - 160 mm 1 steel aggregate 2 combination unit with shoe The shoe is pneumatically pressed Sanding belt dimensions: 970 x 2150 mm Common motor power of 2 grinding aggregates: 11 kW The speed of the feeding belt on the converter: 16-18 m / sec. Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roll diameter: 150 mm Sanding pad width: 50 mm Sanding belt speed: 18 m / s 1 unit Compressed air consumption: 20l / min Standard equipment: Mechanical oscillation of the sanding belt without the use of compressed air. ECO GEAR SYSTEM Smooth regulation of the feeding belt on the converter 4-20m / min Fpjdog A D Anopfx Akvsk Automatic star / delta start Steel roller on the first aggregate, rubberized on KOMBI agragata Electronic table height display Automatic reading device for gr. material and table position setting Safety switches Automatic machine switches Main engine brake Rubber pressure rollers 2-roller table at the entrance and exit In stock! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Condition: used, Year of construction: 2018, operating hours: 10,347 h, total height: 2,400 mm, total length: 7,000 mm, total width: 2,400 mm, Colour: Grey Empty weight: 3.450 kg - Year: 2018 - Documentation available: Yes - CE marking present: Yes Fpsdpfoxtbgpox Akvsk - CE certificate present: Yes - Operating hours: 10347 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 10 - └ Vertical drilling spindles [pcs.]: 24 - Saw unit present: Yes - Tool changer positions [pcs.]: 25 - System/software: Xilog plus - Safety feature: Bumper guard - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - CNC options: Barcode reader, Offcut conveyor, Laser for vacuum pod positioning - Working range X [mm]: 3110 - Working range Y [mm]: 1320 - Z-axis working range [mm]: 180 - Transport dimensions: 7000mm x 2400mm x 2400mm (l x w x h) - Transport weight [kg]: 3450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: 0-241-06-5232, functionality: fully functional, operating hours: 12,608 h, cutting height (max.): 125 mm, cutting width (max.): 2,200 mm, cutting length (max.): 4,300 mm, Panel Saw Holzma HKL11/43/22 Max. cutting width: 4300 mm Max. cutting length: 2200 mm Fsdsxfvp Ajpfx Akvjpk Max. cutting height: 125 mm The saw is in continuous operation, so viewing during operation is possible. The machine will be available from 02/03/2026.

Condition: ready for operation (used), Four-sided planer / construction timber planer Fsdjw Dn Uqepfx Akvspk Maximum width: approx. 55 cm Maximum height: approx. 14 cm Immediately available Location: Austria, near Grieskirchen

Condition: ready for operation (used), functionality: fully functional, LINDNER wood chipper for sawmill offcuts, model T 400/140-2 – after technical inspection – in very good condition – suitable for producing technological wood chips TECHNICAL SPECIFICATIONS: infeed width: 400 mm infeed height: 140 mm Fpedpfsr Ak Rgsx Akvjk rotor diameter: 450 mm rotor length: 400 mm main motor power: 33 kW infeed motors power: 2 x 1.5 kW number of knives: 2 pieces screen dimensions: 60 mm x 90 mm infeed rollers in very good condition feeder motor power: 1.5 kW feeder length: 4,200 mm transport dimensions (L/W/H): 430 / 240 / 150 cm weight: approx. 2,000 kg