Used Zimmer Galva 4 for sale (57,830)

Condition: new, Zimmer KWH5502DS1 hydraulic clamping trolley, unused in opened original packaging, 100% functional, scope of delivery as per photos Psdpsxtwgfefx Ahvegi

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, MACHINE Dimensions (height x width x depth): 2760 x 1110 x 1840 mm Weight: 2750 kg WORK TABLE Table size: 840 x 600 mm Pjdpfxswbalvj Ahvegi Dielectric above table: 360 mm Maximum workpiece weight: 1000 kg T-slots: 4 x 10 mm Distance between table and quill without chuck (max/min): 595/180 mm WORKING HEAD Travel range X - Y: 565 x 400 mm Travel range Z: 415 mm Resolution X - Y - Z: 0.001 mm C-axis resolution: 0.001° Rapid traverse speed: 800 mm/min Max. electrode weight without rotation: 100 kg Max. electrode weight with rotation: 15 kg DIELECTRIC SUPPLY Tank volume: 400 liters Paper candle filters: 4 pieces GENERATOR Dimensions (height x width x depth): 1800 x 600 x 920 mm Weight: 300 kg Nominal current: 60 – 120 A Connected load: 15 – 23 kVA

Condition: new, Zimmer MBPS3502DS1 brake trolley JF550AB with profile rail guide, holding force 2100N, unused in original packaging, 100% functional, scope of delivery as per photos. Pgodpjx Evcrefx Ahvji

Condition: used, This listing is for the LABCOLD RLDF1520 Climatic Class 4 Refrigerator The unit is in full working condition and is ready for immediate use The LABCOLD RLDF1510 is a pharmacy / vaccine‑grade refrigerator designed for storage of temperature‑sensitive medicines, vaccines, or biological materials Some of its key specs and features: Feature Specification / Detail Capacity ~ 430 litres External Dimensions (H × W × D) 1860 mm × 600 mm × 700 mm Temperature Operating Range +2 °C to +8 °C (nominal operating ~5 °C) Control / Monitoring “IntelliCold™” controller, 24/7 temperature logging, alarms (high/low temp, door open, power failure) Insulation / Construction Enamelled steel exterior, corrosion‑resistant painted aluminium interior; fan‑assisted cooling; off‑cycle auto defrost Door Type Solid door (non‑glass) version Other Features Door lock with keys, access port for probe, remote alarm contacts, data storage (13 months) Pgedpfexhdthox Ahvsi Power / Energy Use Often quoted ~ 5.52 kWh/24h (for a 440 L variant/related model) In short: this is a robust, regulated refrigerator intended for cold chain use (i.e. storage of medicines, vaccines, biologics) rather than for general domestic or food us

Condition: used, Year of construction: 2015, operating hours: 2,640 h, functionality: fully functional, power: 44 kW (59.82 HP), air demand: 2,150 m³/h, Pos. 10 Description: Mobile Suction Unit VacTrailer S-4 Diesel Kubota diesel engine 44 kW Rotary lobe vacuum pump Max. air flow rate 2,150 m³/h Max. vacuum 500 mbar Collection volume 500 liters Pocket filter 12 m² Pneumatic AirShock® filter cleaning system Safety cartridge filter 7.5 m², dust class M Version B1, ignition source-free design Pos. 20 Pgjdpsxn Ru Ssfx Ahvji Description: Painting of the suction unit Color: Wieland Blue, similar to RAL 5015 Pos. 30 Description: Big Bag Fastening With hooks and lashing straps (35 mm) for securing big bags (not suitable for lifting) Pos. 40 Description: Fastening Device for Big Bags For mounted sliding gate on the filter separator, incl. ventilation device Pos. 50 Description: Flat Slide Valve DN 300, manually operated Suitable for free-flowing or crumbly suction material Pos. 60 Supports for Filter Separator (2 pcs) Required for load over 800 kg, up to max. 1,200 kg Incl. holders for supports in trailer frame Pos. 70 Trailer for road use (2,500 kg) Approval for 100 km/h, height-adjustable drawbar, tandem axles, galvanized frame Removable lighting bracket, electrical connection 12/24 V, eye- and ball-type couplings Pos. 80 Installation of the suction unit on trailer Incl. TÜV approval, 2-stage adjustable rear supports Pos. 90 Control extension for level sensor For connection of a mobile pre-separator, incl. Harting socket on S4 control system Pos. 100 Short pipe piece, galvanized steel 1 × DN 125 SK-M / 1 × DN 100 SK-F Pos. 110 Pocket filter, polyester needle felt Membrane-coated, 6 m², 9 pockets Pos. 120 Fine filter cartridge, dust class M Filter surface 7.5 m² Pos. 130 Description: Electric Hydraulic System Electric hydraulic pump with all control units - For lifting and lowering the collection container - For opening and closing the discharge slide

Condition: good (used), Production: alloyed Pgsdpfouhn Dcjx Ahvsi Tip: 4 sec Turntable

Condition: good (used), Manufacture: ALLOYD Tip: 4 seec Pgjdpfxsuhn Dis Ahvei Turntable

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 20369, table width: 400 mm, table length: 570 mm, controller model: POCON 60, empty load weight: 6,000 kg, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is November 20, 2025! Bidding obligates you to collect the item on time between December 1, 2025, and December 5, 2025! TECHNICAL DETAILS Table width: 400 mm Table length: 570 mm Magnet dimensions: 260 x 150 mm Control unit: POCON 60 MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Connection: 5 kVA Dimensions & Weight Dimensions: 3,500 x 3,000 x 2,600 mm Weight: 6,000 kg EQUIPMENT - 4 T-slots - Clamping system - Magnetic clamping plate - ZIMMER + KREIM electrode changer system - Electrode holder Pgjdpfx Aoxm Sf Nehvsi - 50-position electrode changer - Storage system with various clamping plates - 2 tool trolleys with suitable electrodes and clamping systems

Condition: new, Year of construction: 2022, functionality: fully functional, The price is for all together. Ideal for a new start on Screen Printing Art studio Artists Pedpfjxwnw Asx Ahvegi The set contains: 1.SCREEN PRINTING CAROUSELL type X 4 TABLES, FULL AJUSTABLE 2. DRYIER: 3FACE POWER 3.FLASH AUTO: 3FACE POWER ALL ARE NEW , OUT OF THEIR BOXES.

Condition: used, diameter div. number 40x Pjdpfxsww Nblj Ahvsgi tool adaptor BT 40

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Pgedpod Tbbdofx Ahvsi Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights. Pgodpfx Ajfdkb Tjhvsi

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) Pgjdpfod Tqalox Ahvei - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. Pgsdpfefdkb Uox Ahvei The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface Psdpfjguk Dkjx Ahvjgi - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. Pgsdofdkbhjpfx Ahvji The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) Pgsdpfsguk Dvsx Ahvji - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Treif Breadslicer 4-24MM In good working condition for more information please sent an request Pgodpfx Aheumpg Revji

Condition: new, SALES FROM STOCK Loading Capacity: 240 kg Max Platform Height: 4 m Occupants: 1 Platform Dimension: 1.15 x 0.6 m Overall Length: 1.32 m Overall Width: 0.76 m Overall Height: 1.92 m Platform Extension: 0.55 m Extension Load: 100 kg Up/Down Speed: 34/25 sec Turning Radius: 0 Maximum Slope: 1.5°/2° Drive Tyres: 230 x 80 mm Gradeability: 25% Wheel Base: 1.0 m Travel Speed (Stowed): 4 km/h Travel Speed (Raised): 0.5 km/h Battery: 2 x 12 V / 100 Ah Lifting Motor: 24 V / 1.3 kW Drive Motors: 24 V / 0.5 kW Podpfxjulah No Ahvegi Charger: 24 V / 15 A Weight: 660 kg Proportional Controls Automatic Pothole Protection Drivable At Full Height Non-Marking Tyres Automatic Brake System Emergency Lowering System Emergency Stop Button Cylinder Holding Valve Onboard Diagnostic System

Condition: used, Year of construction: 2002, Diesinking / EDM Travel distance X: 350 mm Travel distance Y :250 mm Travel distance Z: 315 mm Pjdpfx Asvtfn Ishvsgi table size X: 576 mm table size Y: 400 mm max. workpiece weight: 500 kg C-axis quill chuck: EROWA

Condition: used, Year of construction: 2000, Diesinking / EDM Travel distance X: 825 mm Travel distance Y :680 mm Travel distance Z: 405 mm table size X: 1200 mm Pgedpfxevtfn Uo Ahvoi table size Y: 850 mm max. workpiece weight: 3000 kg electrode changer: 50 - time Generator POCON 60 Quill holder: EROWA heavy duty adapter O module halogen light

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Zimmer & Kreim handling system Chameleon with 360 slots Pgjdpfx Ahowypggevsi For technical data see original order confirmation

Year of construction: 1994, condition: excellent (used), 4 side planer 8 8 HARBS heads long table going 3 meters. Machine weight 5500 kg Pedpfx Aol Dw Nxjhvsgi cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm.

Year of construction: 1980, condition: used, Sharpening TOOL VOLLMER FINZ 4-800 Location Pgjdpscw Dg Dofx Ahvei Gorzow Wielkopolski. Conditions of delivery Pick your own Cost of delivery Client cover startup type negotiated Description Comments GRINDING AUTOMATIC CIRCULAR SAW WIDIOWYCH THE HYDRAULIC

Condition: excellent (used), Year of construction: 2014, 4 Qty Stainless Steel Hoppers 3 Qty Hoppers Dimensions 700mm x 1200mm x 1220mm H. 1 Qty Hopper dimensions 1200mm x 1200mm x 1220mm H With manual gate valve Gas strut opening lid Internal stainless mesh screen Pgjdpfx Asurf Twehvsi Mobile on lockable castors Some with pneumatic vibration device. Some with level sensor device In excellent condition