Used Za 3000 for sale (5,540)

Condition: used, plate width 3000 mm plate depth 2000 mm plate height 230 mm weight of the machine ca. / t Clamping plate Dimensions: 3000 x 2000 x 230 mm Nedpfoud Iw Ujx Ad Nokt T-slot dimensions: 42 x 72 x 74 (H) The images are for illustrative purposes only. More pictures will follow.

Condition: used, Year of construction: 2008, roll diameter 300 mm Wheel width / mm Distance of shafts / Njdpfx Adet Ukxqj Nekt Roller block turning device EU-RB 3000MS Gesamtabmessung: 2060x1002x555mm Adjustment of the roller brackets: manual, centric Locking: secured locking pin Weight: 750kg Max. Max. load capacity: 3000kg Workpiece diameter: 150 x 3000mm Roller diameter: 300mm Torque on the drive roller: 500 Nm Peripheral force on the drive roller: 3300N Feed speed: 100 - 2000 nm/min Supply voltage: 230 V/50 Hz Connected load: 2.3 kVA

Condition: used, plate width 3000 mm plate depth 5000 mm plate height 400 mm weight 20 t dimensions of the machine ca. 5 x 3 x 0,5 m Nkjdsgrnfgopfx Ad Nst Table length 5000 mm Table width 3000 mm Table height 380 - 400 mm Machine weight approx. Approx. 20000 kg Space requirement approx. 5 x 3x 0.5 m

Condition: used, Year of construction: 2000, length 3000 mm width 2000 mm total power requirement / kW Test plate Test table Measuring plate Precision measuring table Degree of accuracy: DIN 876/0 Permissible deviation: 0.016mm Actual deviation: 0.0139mm Tested on 07.12.2000 Length: 3000mm Width: 2000mm Nkodpfx Adjud Im Ne Net Height: 930mm Dead weight: 5400kg Information on the scope of delivery The package contains only the ordered product. Further decorative items or other items shown in the product images are not included in the delivery.

Year of construction: 1990, condition: used, table length 3000 mm table width 2000 mm table height 300 mm total power requirement 0 kW weight of the machine ca. 4 t dimensions of the machine ca. 3 x 2 x 0,3 m Nsdpfsgrd R Rsx Ad Njkt

Condition: new, Year of construction: 2025, overall weight: 4,200 kg, total height: 600 mm, total length: 3,000 mm, total width: 1,000 mm, Clamping cube - T-slot plates 3000 x 1000 x 600 mm If you have not found the size you are looking for, you can also send us an e-mail with the completed PDF form. With this form we can produce an individual plate for you. Parameters can be combined as desired. T-slots - width: T-slot spacing: Edge distance: Number of grooves: 10 Njdpfx Aotrlahod Nokt Casting quality: HT250 Flatness less than 0,12 mm Surface machined according to DIN 876/III

Condition: ready for operation (used), Year of construction: 2008, controller manufacturer: OKUMA, controller model: OSP - P300L, number of axes: 4, This 4-axis Okuma LB 3000 EX MYT was manufactured in 2008, offering advanced capabilities for horizontal turning. Ideal for complex machining tasks, this machine ensures precision and efficiency. Consider the opportunity to buy this Okuma LB 3000 EX MYT horizontal turning machine. Contact us for more information. Additional equipment Nodpfxoyalp Aj Ad Nokt • Bar Loader: Iemca Master mod. 880 33 P/R • Automatic Presetting: Yes • Gear Machining Software and Tools: Yes • Accessories: Chip Evacuator Machine Benefits Technical Machine Benefits • Max. Workable diameter: Ø 400 mm • Max. Workable length: 500 mm • Type: cnc lathe • Condition: used • State: optimal Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 2,708 mm, travel distance Y-axis: 1,513 mm, travel distance Z-axis: 1,259 mm, controller manufacturer: FANUC, controller model: 31i-B, overall weight: 25,000 kg, spindle speed (max.): 3,000 rpm, spindle motor power: 37,000 W, number of axes: 3, This 3-axis Zayer 30KF 3000 vertical machining center was manufactured in 1997. It offers robust construction and precision for complex machining tasks. Ideal for those seeking reliable performance in a used machine. Contact us for more information. Nedpfx Aeyall Dsd Njkt Machine Benefits Technical Machine Benefits • Table surface: 3000x1000 mm • Max permissible weight on the table: 10000 kg • Automatic head with two vertical and horizontal positions Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 3,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: na, spindle speed (max.): 15,000 rpm, number of axes: 3, This 3-axis FAMUP COBO MM 3000 was manufactured in 2002. It features a working area of 3000 × 600 × 600 mm, spindle speed up to 15,000 rpm, and ISO 40 spindle taper. Equipped with a 30-position tool changer, high-pressure through-spindle coolant, a dividing wall for pendular jobs, and a chip conveyor. Consider the opportunity to buy this FAMUP COBO MM 3000 vertical machining centre. Contact us for more information. Machine Benefits Technical Machine Benefits Nkedpfx Adoyalkae Net • Tool changer: 30 positions • High-pressure through-spindle coolant: yes • Dividing wall for pendular job: yes • Chip conveyor: yes Extra Information Machine still under power Technical Specification Taper Size ISO 40

Condition: excellent (used), Year of construction: 2011, TOP TOWER 3000 asphalt plant including: Ermont dryer drum + CBS burner + filter and hopper under filter + mixer. Year: 2011. Capacity: 200 tons/hour. Control cabin is missing. Nkjdpfxsxpm Tte Ad Net

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 4,200 rpm, spindle motor power: 22,000 W, overall weight: 6,200 kg, controller manufacturer: OKUMA, controller model: OSP P200-L, number of axes: 2, This 4-axis Okuma LB 3000 MY was manufactured in 2008. It features a 12-position turret with all driven tools, C-axis and Y-axis functionality, and a main spindle motor of 22 kW. The machine includes a hydraulic and programmable tailstock, a chuck size of 250 mm, and a bar capacity of 75 mm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 MY machine we have for sale. Contact us for more information. Additional equipment • Spindle oil chiller included • Side chip conveyor (hinged belt type) • Double foot pedal for chuck and tailstock control • Includes transformer, manuals, parts list, and schematics Njdpfx Adjyaiq Do Njkt Machine Benefits Technical Machine Benefits • Torque: 620 nm • Spindle nose: a2-8 • Bar capacity: 75 mm • Chuck: 250 mm smw autoblok with quick jaw change • Swing diameter: 520 mm • Max turning diameter: 380 mm • Max turning length: 1050 mm • 12-position turret, all driven tools • Turret indexing time: 0. 2 seconds • Equipped with static and driven tool holders Extra Information Tools Automatic tool load monitoring Renishaw automatic tool measurement arm Driven tools motor: 5.5 kW Driven tool speed: up to 4000 rpm Currently in operation

Condition: used, Year of construction: 2022, type of input current: AC, input voltage: 230 V, input current: 6 A, input frequency: 60 Hz, We are offering this used Swift-Cut Pro 3000 plasma cutting machine, year of manufacture 2022. Nsdpsycv Unsfx Ad Nskt Model: Pro 3000 Serial number: PRS-3000-07221520 Voltage: 110–230 V AC Frequency: 50–60 Hz Current: 6 A Phases: Single Year of manufacture: 2022 If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: used, Radial drilling machine with plate field WEBO type HRH 100 / 3000 Machine. No. 10009555/7 -- 1110185 -- 6046 Year of manufacture 1979 Drilling capacity Ø 100 mm in ST 60 at feed rate 0.5 mm/rev. Nominal throat depth 3000 mm Max. throat depth max. 3100 mm Spindle holder MK 6 Spindle speed 22.4 - 1600 rpm 36 steps Feed rate 0.05 - 2.5 mm/rev 18 steps Spindle - base plate distance 970 - 2335 mm Pinol stroke 325 mm Swivel range of the arm 360 movable on bed, bed length 7500 mm Clamping area panel field 8000 x 2100 mm - Electrical central clamping - Drilling unit can be moved lengthwise on the machine bed by electric motor - Panel field consisting of 2 clamping plates with 7x T-slot, (length 4000 x width 2100 x panel thickness 360 mm) Space requirement L x W x H 8000 x 4550 x 4300 mm Maximum height 4300 mm Transport height (bed with drilling machine) approx. 3150 mm Transport weight (bed with drilling machine) approx. 20 tons Transport dimensions of panel section L x W x H 4000 x 2100 x 900 mm (2 panels stacked on top of each other) Nsdpefbt Hujfx Ad Njkt Transport weight panel field approx. 14 ton. good condition

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 31,411 h, TRUMPF Trumatic 3000 K03 Punch-Laser Combination Machine The punch-laser combination machine enables the flexibility of laser cutting to be integrated with the advantages of punching. The combination of these two technologies opens up a wide range of new possibilities, allowing the manufacturing of even the most complex sheet metal parts. Technical Specifications: - Punching force: 165 kN - Maximum sheet size: (X, Y) 2500 mm x 1250 mm - Max sheet thickness: 3 mm - Maximum tool diameter: 76.2 mm - Maximum forming height: 25 mm - Maximum bending length: 55 mm - Chipless thread forming: M2.5 – M8 - Laser power: 2000 W Nksdjycuypjpfx Ad Not - Number of tool stations: 18 - Tool change time (per tool): 3.9 s - Tool change time (MultiTool): 2.2 s - Positioning accuracy: ±0.1 mm - Repeatability: ±0.03 mm For optimal surface quality of sheet metal parts, the machine is equipped with a brush table and rollers surrounding the forming tools. The MultiTool stations can hold up to 180 different forming tools. Thanks to reduced production times and lower energy consumption, this punch-laser combination system offers a lower cost per unit compared to flatbed laser cutting machines, ensuring higher economic efficiency. This equipment is perfectly suited for efficient, high-volume production of complex sheet metal components. The integrated laser cutting head enables the creation of intricate shapes, delivers high-quality cut edges, and can be used when a specific profile punching tool is unavailable.

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total Nedpfxsx U Sfns Ad Nekt • Year of construction 2010 Subject to prior sale

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 1,500 mm, Heidenhain 530 Diagonal milling head with 2.5° x 2.5° indexing Spindle speed up to 6,000 rpm Tool holder SK50 Internal cooling with 36 bar Longitudinal chip conveyor + cross conveyor Nkjdpfjx I A Hvsx Ad Nst

Condition: good (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 1,500 mm, Heidenhain 530 Nkedsx I A Hijpfx Ad Not Diagonal milling head with 2.5° x 2.5° indexing Spindle speed up to 4,000 rpm Tool holder SK50 Internal coolant supply with 22 bar Longitudinal chip conveyor

Condition: used, Year of construction: 2018, Load capacity 350 kg, table height min. 757 mm, table height max. 1157 mm, table length 3000 mm, table width 1000 mm, length approx. 3010 mm, width/depth approx. 1040 mm, height approx. 1157 mm, recommended extraction capacity 2200 m³/h, number of extraction ports 3 x 220 V, extraction port diameter 140 mm, weight: 130 kg. Storage location: Nattheim. Nkjdpfxsxnlavs Ad Not

Condition: used, Continuous vacuum filler for straight filling and portioning All in one 250 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Standard double screw housing Nkedsx U Ea Sepfx Ad Not Machine dimensions in cm: 200 x 120 x 200

Condition: used, Year of construction: 2009, operating hours: 1,572 h, Price: On request - Year: 2009 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: M39345 - Operating hours: 1572 - Drive system: CNC - Power [kW]: 22.0 - Number of axes [pcs]: 4 - X-axis travel [mm]: 3230 - Y-axis travel [mm]: 2100 - Z-axis travel [mm]: 750 - Table length [mm]: 3000 - Table width [mm]: 1650 - Tool holder: ISO50 - Main spindle power [kW]: 22 - Min. spindle speed [rpm]: 0 - Max. spindle speed [rpm]: 3500 - Positioning accuracy [mm]: 0.005 - Travel speed [mm/s]: 250 - Options: External cooling, Tool magazine, Probe, Tool measurement system, Spindle cooling, Chip conveyor - └ Tool magazine [pcs.]: 30 - Tools included: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Nkodjx U Ebpjpfx Ad Nst Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2000, Ref:11056 . 2000 Hunkeler VEA 520-K-HHS 3000 Endsheet Paster. For inside & outside gluing of end sheet papers, greetings cards inserts and glue-on mounts. Comprising: 1 x product feed (spare feed arm for large format products) 1 x sheet/card feed Sheet counter PVA cold glue system Robatech glue system Table delivery Integral compressor I.R. light beam guard Including tools & accessories. Specification: Product sizes, outside gluing, Max: 520 x 310 mm Min: 100 x 70 mm inserting/tipping-in, Max: 320 x 260 mm (with accessories) Offset gluing (for outside gluing only): - Maximum 50 mm from the fold - No restrictions in travel direction Mechanical speed, Max: 8,400 cycles/hr. Njdpfox Uwznex Ad Nokt

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2017, Equipment: ABS, We are very pleased that our offer has captured your interest and can already assure you that you will be able to purchase a high-quality, attractively priced vehicle with a verifiable service history from us! GERMAN VEHICLE REGISTRATION / EXPORT SERVICES We organize registration and export documents for you, including EUR 1 and manufacturer’s declaration for export purposes. FINANCING Upon request, we are happy to provide you with a leasing, hire-purchase, or financing offer. SERVICE TÜV inspections / UVV tail lift test / LGS inspection / tachograph calibration / installation of OBU units and servicing by our authorized workshop. Nsdpfx Adjyca Ryj Nskt TOLL / ROAD CHARGES Toll registration can be arranged on site. TRAVEL / DISTANCES Wittlich train station – 500 m Frankfurt Airport – 150 km Frankfurt-Hahn Airport – 40 km Luxembourg Airport – 75 km Sale subject to our Terms and Conditions. The details provided online are non-binding descriptions and do not represent guaranteed specifications. The seller assumes no liability for typographical or data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 Wittlich-Wengerohr.

Condition: like new (used), Year of construction: 2016, The ONIX 3300 is a CNC machining centre with 3 controlled axes + 1 additional axis, specifically designed for drilling and milling operations on aluminium, PVC, light alloy, and steel profiles with a maximum thickness of up to 3 mm. The machine offers a working capacity of 3300 mm and is equipped with an 8-position automatic tool magazine, with the possibility of housing an angular head for machining on three sides of the profile, as well as a saw blade for end milling operations. The fully enclosed structure contains the electrospindle, which provides a power of 4 kW and a rotation speed of up to 18,000 rpm, ensuring high performance and excellent machining quality. The swivelling control console, positioned on the right-hand side of the machine, allows for easy and intuitive management of programs and controls during every phase of the production cycle. The ONIX 3300 is equipped with CNC control for the axes and an industrial PC for program management, complete with a 17” LCD monitor, 80 GB hard disk, and 2 USB ports. The programming language is ISO standard, with an operator interface based on the Windows XP platform, and dedicated programming software ITALSOFT – FLY CAM CAD-CAM 3D, designed to optimize machining operations and production cycles. Technical Features • Dimensions (LxPxH): 4600x1675x2260 mm - 182x66x89 in • Dimensions for transport (LxPxH): 4500x1250x2300 mm - 177.5x50x91 in • Weight: 1500 kg - 3306 lb • Nominal power: 6 kW • Absorbed power: 16 A • Voltage: 400 V three phase • Frequency: 50/60 Hz • Air pressure: 7 bar • Accuracy: 0.1 mm - 0.004 in • Electrospindle power: S1 4 kW - 0/18000 rpm • Maximum torque: 3.7 Nm at 12000 rpm • Tool holder adapter: ISO 30 • Spindle cooling system: Electric fan • Operation area: 1 • Machinable sides no.: 1 (3 sides with Angle head) • Standard clamps no.: 4 (manual) • Tool magazine: 8 tool places (on board the basement) • Clamping force: 130 kg per clamp • Zero reference point no.: 1 (manual) • Spray nozzles for lubrication: 1 on the electrospindle • Tank capacity: 2.2 litres Nsdpfx Aswb D Sted Nskt • Slides greasing: Manual • Operating temperature range: From 10 to 35 °C • Humidity: 75 % • Standard colors: RAL 7032 / RAL 5018 • Chip conveyor system: Chip conveyor plate • Machine safety: Safety light screen • Operator interface Monitor: 17” LCD • USB port: On the control panel • Software: ITALSOFT CAD-CAM

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Türkei 24400 € 468.48 € 3000 kg 150 mm 150 mm 360 ° 135 kgm 400 / 50 V / Hz 1.1 kW 1.1 kW 1200 mm 700 - 950 mm The hydraulic positioners are available in standard sizes for load capacities from 1.000 kg to 3.000 kg. Nsdpfxsx Urqde Ad Njkt The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted to the floor. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. The rotation speed can be adjusted via a potentiometer.

Condition: ready for operation (used), Year of construction: 2012, total height: 2,252 mm, overall weight: 9,300 kg, product length (max.): 5,000 mm, This TRUMPF TRUPUNCH 3000 (S11) was manufactured in 2012. It features a Bosch Rexroth MTX CMP70 control, a maximum sheet format of 2,500 × 1,250 mm, and can handle sheet thicknesses up to 6.4 mm. The punching force reaches 180 kN, with a maximum workpiece weight of 160 kg. It includes a linear magazine with 20 stations and supports various roller tools. Consider the opportunity to buy this TRUMPF TRUPUNCH 3000 (S11) CNC punching machine. Contact us for more information. • X-axis speed: 90 m/min • Y-axis speed: 60 m/min • Simultaneous X/Y speed: 108 m/min • C-axis speed: 330 rpm • Max. punching force: 180 kN • Max. pressure foot force: 20 kN • Max. workpiece weight: 160 kg • Max. sheet thickness: 6.4 mm • Max. sheet format: 2500 × 1250 mm (with repositioning) • Electrical connected load: 18 kVA • Fuse protection: 35 A • Pneumatic connection: 7–14 bar • Compressed air consumption: 8–10 Nm³/h • Tapping • Filling level inspection • Multibend Nkedpex Urcgjfx Ad Nst • Multitool • Roller tools including cutting, pinching, folding, beading, knurling, deburring • Monitoring filling level • Hydraulic unit • Punch lubrication • Dimensions Machine Depth 6500 mm