Used Woodturning Tools for sale (36,681)

Condition: used, x-travel 300 mm y-travel 275 mm z-travel 200 mm Bwsdpex Uru Aefx Abbjh spindle tunring speed 40 - 2.000 U/min tool taper ISO 40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: excellent (used), functionality: fully functional, Triade TI-40 Automatic Lathe Bedpfxjx Uq Rvj Abbowh Turning length: 400 mm Template-following copying tools 1 profile tool Automatic material loading

Condition: used, Stud welding machine with shielding gas and lift ignition HBS Type ARC 804 Serial No. 610652 Welding current up to 800 A at 5% duty cycle Welding voltage 30 V Open circuit voltage U0: 95 V Maximum stud diameter 10 mm Rated power 15 kVA Power supply 400 Volt, 50 Hz, 32 A plug Rated current 27 A - Welding current adjustable in 4 steps - Continuously variable welding time setting - Shielding gas connection with continuously adjustable time - Welding gun with lift ignition PMH70 Bsdpfxsx Urcaj Abbswh - Hose package length 4.5 m - Ground cable with two leads and two ground clamps - Digital display for current welding time in ms - Indicator lights for external conductor failure (phase failure) - At maximum stud diameter, approx. 3 studs per minute - 1 piece stud holder Ø 8 mm (fitted), 1 piece stud holder Ø 10 mm, 1 support tube - Mobile on transport trolley - Approx. 20 kg welding studs M8 and M10 in steel and stainless steel, including 12 kg M8 x 25 in stainless steel Required space (L x W x H) 500 x 325 x 305 mm Weight of welding machine 60 kg Total weight with transport trolley 145 kg Good condition

Condition: excellent (used), functionality: fully functional, Triade TI-30 automatic lathe Turning length 300 mm Copying tools by template 1 profile tool Automatic material loading Bsdpfx Abox Uqtdobowh

Condition: excellent (used), functionality: fully functional, Genini Miniautomatic Pass-Through Lathe Turning machine from square timber Main spindle with a two-speed motor with a power of 4.9/5.9kw Hydraulic pump motor with a power of 1.5kw Maximum length of square timber 950mm Maximum turning length 120mm Bsdpfxox T A Ukj Abbswh Maximum turning diameter 80mm Two supports with profiling knives 1 front spindle for drilling or front profiling 1 roughing turning knife Machine weight approx. 1800kg

Condition: excellent (used), Genini ROTOUR 100 Automatic Lathe Max working length: 300 mm Max turning diameter (round): Ø 140 mm, square: 100×100 mm Spindle motor: 15 HP Spindle speed: 2050-2800-4100-5600 rpm Pump motor: 3 HP Grinding motor: 0.5 HP CE marking Bedpfx Aox T Alcobbjwh

Condition: excellent (used), functionality: fully functional, Genini ROTOUR 100 lathe automatic Max working length: 300 mm Bwjdpfx Aox Tz Trebbsh Max turning diameter: round Ø 140 mm, square 100×100 mm Spindle motor: 15 HP Spindle speeds: 2050-2800-4100-5600 rpm Pump motor: 3 HP Grinding motor: 0.5 HP

Condition: good (used), 2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punch tool: 2 columns, with 4-digit code Bodpfx Abshb N Atsbewh -Mounting: Bolt Ø 38 mm -Die stamp: see photos -Dimensions: 450/265/H305 mm -Weight: 94 kg

Condition: excellent (used), functionality: fully functional, Genini TBK 70 Automatic Lathe Output square 45×140 mm (approx. 10 pcs/min – 600 pcs/h, with 2 roughing tools – 1 finishing tool) Max. workable block 70×70 mm Bwedex Tzpgspfx Abbsh Min. workable block 20×20 mm Max. workable length 300 mm Min. working length 25 mm Spindle motor power 5.5 HP (3.5 kW) Pump motor power 2 HP (1.5 kW) CE mark

Condition: excellent (used), functionality: fully functional, Deckel FP1 milling machine. Very good condition. Fully functional. Bodpsxgdr Iofx Abbjwh

Condition: used, overall weight: 221 kg, total length: 400 mm, total width: 400 mm, total height: 540 mm, Cross tooling column with Gressel Bsdpfox Ttzzsx Abbjwh Mounting holes 4 Pitch fixing holes 320 mm Length 400 mm Width 400 mm Height 540 mm Weight 221 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, overall weight: 208 kg, total length: 400 mm, total width: 400 mm, total height: 470 mm, Erowa ER-051145 FL-AA0324 Double side tooling column with Erowa Mounting holes System Erowa Length 400 mm Width 400 mm Bsdpfx Absx Ttzbsbowh Height 470 mm Weight 208 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 1994, Diameter: 500mm 3 Chuck: yes Bjdpfx Abox Ttc Eobswh Spindle bore:160mm Connector: CAMLOCK D-8" Max. speed: 1900Rpm Length: 0mm Width: 0mm Height: 0mm Weight: 60kg

Condition: used, Year of construction: 2004, Operating hours: Control on: 3123 h Machine on: 2970 h Program run: 902 h Spindle runtime: 988 h Technical data: Travel X/Y/Z: 650 / 500 / 450 mm Bjdpfswglapjx Abbjwh Clamping area: 1000 x 600 mm Spindle taper: SK 40 Spindle speed: 12,000 rpm Table load max.: 400 kg Number of tool magazine positions: 20 Power: 24 kVA Machine weight, approx.: 5,500 kg Equipment: - Heidenhain iTNC 530 control - 20-position tool changer - Heidenhain tool probe - Heidenhain workpiece probe - Heidenhain handwheel - Menzel minimal quantity lubrication system - Approx. 25 tool holders

Condition: excellent (used), Deep hole drilling machine tools DEGEN - UTB MACH-ID 9188 Make: DEGEN Type: UTB Year: 2005 Bwjdpfx Absx Tp Ahjbsh

Condition: excellent (used), Year of construction: 2006, Metal cutting Tooling KITAGAWA - 250 Horizontal: Yes Vertical: Yes Diameter: 230mm Tailstock: 3Mk indexing: 360.000° Centre height:180mm Control system:MAZATROL 640 M Length: 500mm Width: 400mm Height: 300mm Weight: 50kg Bwodpfx Abex Tpzkebjh

Condition: good (used), Tool cabinet with sliding doors Width: 2000 mm Depth: 500 mm Height: 1200 mm Shelf depth: 400 mm Key included The cabinet is old but sturdy Bwjdpfxox Tphks Abbsh The sliding doors operate flawlessly!

Condition: excellent (used), Lathe dmt180 Overall length 1520 mm, overall width 520 mm Centre height 180 mm, distance between centres 1000 mm Weight approx. 45 kg Spindle fitting M33 Speeds: 1000, 1700, 2700 rpm 240 Volt, 0.9 kW Bwjdpjq Acfhjfx Abbsh

Condition: excellent (used), Turning tools with rotating cutting plate Bwjdsd Hflaspfx Abbsh Type: RRSDR 3232P12 Make Mitsubishi Length 165 mm

Condition: used, Tool measuring instrument Make Mitutoyo Type quick set R Bodpfxoddtuys Abbowh

Year of construction: 2019, condition: as good as new (ex-display), Rolling burr tool Make Gleason - Hurth Type:CH7M5R - 7B340-B1A 200 mm diameter unused is delivered in a wooden box Weight 9,5 kg Bjdpfxefgwt Ej Abbewh

Condition: used, Spindle-out tool Make Kelch Diameter center hole 60 mm Steel cross section 34 mm square diameter hole circle for fixing hole 102,5 mm Length 450 mm Bwsdpfx Abecp Azxobsh width 135 mm Height 105 mm

Year of construction: 2010, condition: excellent (used), Spindle tool in wooden case Bodof Dx Srspfx Abbowh Make IGP Spindle mount Mk 4 maximum spindle range 200 mm Weight 6,8 kg

Condition: used, various tool changing consoles / die loading arms available: 070022 GUETHLE-SWT CT 16/1600 (16 t / 1600 mm) with support leg (2x) 180006 GUETHLE-SWT CT 6/2700 (6 t / 2700 mm) with support leg (2x) 210008 GUETHLE-SWT CK t / 1000 mm) (2x) 210009 GUETHLE-SWT CK t / 1000 mm) (2x) Bwodpfx Asxddqfobbsh 180010 unknown (2 t / 1500 mm) with support leg (2x) 190002 GUETHLE-SWT CT t / 1000 mm) with support leg (2x) 220019 GUETHLE-SWT CT 2/1000 (2 t / 1000 mm) with support leg (2x) 180002 GUETHLE-SWT CK 2/800 (2 t / 800 mm) (2x) 090054 GUETHLE-SWT CS 2/800 (2 t / 800 mm) swivelling (2x) 180003 GUETHLE-SWT CK 1/800 (1 t / 800 mm) (2x) 230001 Hydrap (1 t / 800 mm) (2x) 070023 Dimeco T.C.F. ,5 t / 500 mm) (2x)

Condition: excellent (used), functionality: fully functional, Automatic lathe Locatelli Ariete 3 Bwodpfsx Thw Djx Abbeh Length of the cant max/min 1000/200mm Dimensions of the cant max/min 85×85/20x20mm Maximum length of the processed material 120mm with a hole 150mm without a hole Automatic material feeder CE certificate Complete DTR documentation Main engine with a power of 3/4kw Two spindle speeds 2500/3600rpm Oil pump engine 2.2kw Working pressure 6-8bar