Used Woodturning Machine for sale (91,194)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 00049781, workpiece diameter (max.): 50 mm, spindle diameter: 69 mm, spindle speed (max.): 5,000 rpm, working stroke: 130 mm, roll spacing: 255 mm, TECHNICAL DETAILS Contact surface: 180 mm Workpiece diameter: 4 - 50 mm Rolling pressure (infinitely variable): 0-200 kN Feed (infinitely variable): 0-50 mm/s Rolling cycles per minute: 0-86 Rolling spindles Rolling spindle diameter: 69.85 mm Distance between rolling spindles: 125 - 255 mm Credpfoxbfwzex Abujh Spindle mounting length: 160 mm Traverse of the rolling spindle slide: 130 mm Rolling spindle speed: 3000-5000 rpm Rolling tool diameter: 130 - 200 mm Machine bed height: 800 mm Height of rolling spindle above machine bed: 160 mm MACHINE DETAILS Control system: SIEMENS SIMATIC C7 Voltage: 400 V, 50 Hz Dimensions & Weight Machine height: 1,600 mm Weight: 2,400 kg

Condition: ready for operation (used), Year of construction: 1998, operating hours: 30,430 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, punching diameter: 76 mm, TECHNICAL DETAILS Pressing force: 220 kN Maximum sheet thickness: 6.4 mm Punching diameter: 76.2 mm X-axis travel: 2,500 mm Y-axis travel: 1,250 mm Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Positioning speed (simulation): 108 m/min Positioning speed rotary axis: 360 °/sec Workpiece weight: 150 kg Smallest programmable increment: 0.01 mm or 0.01° Tool stations: 15 units Tool change time: 1.5 - 6.5 sec Codpfx Ajxhfu Hobujrh MACHINE DETAILS Dimensions & Weight Dimensions: 6,400 x 5,800 x 2,100 mm Approx. machine weight: 11,050 kg Operating hours: 30,430 h

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, table bore: 80 mm, table diameter: 145 mm, gear diameter: 125 mm, controller manufacturer: Siemens, controller model: SINUMERIK 840 D, TECHNICAL DETAILS Credpfx Aoxf Azxebueh Maximum wheel diameter: 125 mm Maximum module: 3 Maximum gear width (spur gears): 24 mm Center distance: -25 to +180 mm Maximum swivel angle: 12° Maximum helix angle: 45° Table Table diameter: 145 mm Table bore: 80 mm Infinitely variable table speed: 0.03 – 50 rpm Shaper spindle Stroke rate (double strokes): 1,500 – 3,000 DS/min Stroke position adjustment: 70 mm Stroke length min./max.: 0 – 30 mm Shaper spindle diameter: 85 mm Cutter holder mount: HSK 80 B Tool and workpiece Tool number of teeth: 1 – 200 Minimum tool module: 0.05 Workpiece number of teeth: 1 – 1,500 Minimum workpiece module: 0.05 Control Control: SINUMERIK 840 D MACHINE DETAILS Electrical data Drive power: 7.5 kW Total power requirement: 30 kVA Weight and dimensions Machine weight: approx. 8 t Space requirement: approx. 4.3 × 2.8 × 2.9 m EQUIPMENT Swiveling counter-holder with 4 positions Automatic workpiece changing device Linear workpiece conveyor

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 1,500 mm, table length: 4,000 mm, table width: 2,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 5,000 mm Y-axis travel: 2,800 mm Z-axis travel: 1,500 mm Table length: 4,000 mm Table width: 2,000 mm Credpfx Aexfiazsbush Max. table load: 20,000 kg Spindle speed: 20 – 3,000 rpm Spindle power S1 = 100%: 30 kW Spindle power S3 = 60%: 35 kW Max. spindle torque: 1,250 Nm at 226 rpm Tool holder: ISO SK50 Number of tool changer positions: 100 Milling Head Automatic milling head: Index 2.5° Straight milling head: Index 1.0° Feed Rate Working feed rate: 2 – 5,000 mm/min Rapid Traverse X-axis: 12,000 mm/min Y-Z-axis: 15,000 mm/min MACHINE DETAILS Control: HEIDENHAIN TNC426CB Dimensions (L x W x H): 9,800 x 6,200 x 7,100 mm Machine weight: approx. 31,600 kg

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, edge thickness (max.): 20 mm, plate thickness: 60 mm, controller model: IMATRONIC 121/01, TECHNICAL DETAILS Edge thickness, coil: 0.3 – 3 mm Edge thickness, strips/sheared pieces: 0.8 – 20 mm Panel thickness: 8 – 60 mm Motorised chain feed from below (variable): 6 – 30 m/min MACHINE DETAILS Electronic control: IMATRONIC 121/01 EQUIPMENT Levelling unit with NC adjustment 08.376: (4.5 kW × 2 at 9,000 rpm) Edge heating lamps: 1.5 kW × 2 Glue unit 283.1513: (hot-melt glue + preheater) with NC adjustment Cedpfx Abjxf Ewvjuerh Glue unit 08.42: (0.66 kW × 2 at 12,000 rpm) Profiling group 08.0555: (1.85 kW × 2 at 12,000 rpm) Multifunctional unit 08.348: (0.66 kW × 2 at 12,000 rpm) Corner copy routers 08.519 Glue scraper group 08.50 Brushing unit 08.612: (0.25 kW × 2 at 1,500 rpm) Unit 08.181: (4.4 kW × 1 at 6,000 rpm) Belt sanding unit 08.062: (1.8 kW × 1 at 3,000 rpm) Upper pressure system with motorised rubber belt Entry fence with NC adjustment Pressure zone Roll holder with 1 roll Automatic end trimming tool change (cross system)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1703, The SEAC FPM-400 combines the SEAC FPM-200 and SEAC FPM-350! The machine has been upgraded with additional equipment (see equipment)! TECHNICAL DETAILS Productivity: 150–320 pieces per minute MACHINE DETAILS Operating hours: 672 h EQUIPMENT Spare parts Belt system converted from timing belt to V-belt Pump for water pressurization Comb installed at the fish fillet outlet Csdpfx Abjxd Ubzsuorh

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, center height: 225 mm, controller model: Fanuc 16T, TECHNICAL DETAILS Centre height: 225 mm MACHINE DETAILS Credsxlix Depfx Abueh Control: Fanuc 16T

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,500 mm, TECHNICAL DETAILS Cedpfjxhfnajx Abusrh Working area: 3,000 x 1,500 mm Max. punching force: 220 kN Max. sheet thickness: 6 mm MACHINE DETAILS Dimensions & Weight Dimensions: 7,500 x 7,500 x 2,500 mm Approx. machine weight: 17,500 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 10108, grinding wheel diameter: 100 mm, grinding length: 100 mm, center width: 100 mm, grinding spindle speed: 18,000 rpm, spindle speed (max.): 250 rpm, TECHNICAL DETAILS Codpfjxf Ak Tsx Abusrh Grinding headstock Feed: X1 axes (CNC-controlled) Feed: Z1 axes (CNC-controlled) Grinding spindle (I) Feed: X2 axes (CNC-controlled) Feed: Z2 axes (CNC-controlled) Grinding spindle (II) Feed: X3 axes (CNC-controlled) Grinding spindle (I + II) Flange: Ø 52 mm Standard collar: Ø 32 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Drive: 12 kW Speed control: with frequency converter Max. speed: 18,000 rpm Balancing: electronic Grinding wheel (grinding spindle I + II) Type: Borazon (CBN) ceramic bonded Diameter: Ø 100 mm Bore: Ø 32 mm Grinding wheel coating width: max. 20 mm Circumferential speed: max. 125 m/s Cam piece Workpiece rotation diameter: max. 80 mm Clamping length: max. 100 mm Grinding length: max. 100 mm Workpiece weight: max. 0.5 kg Workpiece spindle Design: fixed with integrated infeed/outfeed movement Stroke: 50 mm Workpiece spindle Dimensions: Ø 210 x 700 mm Flange: Ø 180 mm Standard collar: Ø 127 mm Lubrication: oil lubrication Set air pressure: see chapter 5.3.1 Drive: with servo motor, C1 axis (CNC-controlled) Speed max.: 250 rpm Tailstock Longitudinal adjustment: manual via gear Tailstock quill Live center: mounting hole Ø 20 mm Clamping force: adjustable via pneumatics Dimensions: 50 x 80 x 178 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Grinding stock Design: fixed Steady rest Type: GR - 115 Diameter range: Ø 45 - Ø 60 mm Set air pressure: see chapter 5.3.1 Profiling of the grinding wheel Fine dressing: circumference and face with diamond wheel, mounted on the dressing spindle Circumferential dressing: Ø 110 mm Dressing spindle Dimensions: Ø 80 x 250 mm Flange: Ø 100 mm Standard collar: Ø 75 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Drive: 5.3 kW Speed control: with frequency converter Max. speed: 30,000 rpm MACHINE DETAILS Installation dimensions: 8,935 x 5,956 x 3,437 mm Weight: 24 t Connection power: 87 kVA

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, controller manufacturer: Siemens SINUMERIK 80 D, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 100 m/min, TECHNICAL DETAILS Working Area X-axis: 3,000 mm Y-axis: 1,300 mm Z-axis: 600 mm B-axis: ±135° C-axis: n × 360° Speeds X / Y / Z axes: 100 m/min B / C axes: 540 °/s Acceleration Csdpoxlctzsfx Abuorh Simultaneous: 17.3 m/s² X / Y / Z axes: 10 m/s² B / C axes: 200 | 100 rad/s² Maximum Positioning Accuracy Linear axes X / Y / Z: 0.03 mm Rotary axes B / C: 0.005° Maximum Positioning Deviation Linear axes X / Y / Z: 0.08 mm Rotary axes B / C: 0.015° MACHINE DETAILS Laser type: Solid-state laser TruDisk 3001 Cutting gas: Nitrogen Control system: Siemens SINUMERIK 80 D EQUIPMENT Magnetic coupling Dynamic cutting optics with f = 150 mm FocusLine FastLine Cell ObserveLine Rotary changer D = 4,000 mm including rear protection Scrap conveyor 4× configurable control interface Valve island for 8 pneumatic clamps per side 2× loading status lights for rotary changer Extended compressed air supply on equipment panel including vacuum ejectors Cutting gas compressed air Renishaw touch probe Measuring head (without touch probe) Measurement data processing 3× horizontal device interface Extraction piping Rotary changer safety enclosure including safety device, 1 window, and column for control panel Status indicator lamp top & bottom Video monitoring with camera Monitor mount Special installation Cooling unit KLH

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, workpiece width (max.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable - Spray unit: available - Pre-milling unit: available - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side - Quick-change units: available MACHINE DETAILS - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm - Standards: CE requirements Crodpfx Abjxg Ix Soueh EQUIPMENT - Special equipment: with nesting - New chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit

Condition: like new (used), Year of construction: 2012, input voltage: 400 V, 2 X Zentner Washer 250 - Screen Cleaning Units Cjdpsv Dpy Nefx Abuerh Unit 1 Unused and New Condition $20,000.00 USD Unit 2 Used - Excellent Condition $16,000.00 USD

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 26BB2444, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Electrical Data Connection: 380 V / 50 Hz Rated power: 10 kVA Fuse rating: 25 A Control voltage (AC): 220 VAC Control voltage (DC): 24 VDC Cjdpjxliwyjfx Abuorh EQUIPMENT Coolant tank

Condition: like new (used), Year of construction: 2005, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: will advise enquirer, pressure: 200 bar, this machine has very little use and is as new condition Cjdpfxjwgkhrs Abuorh

Condition: refurbished (used), functionality: limited functionality, Year of construction: 2003, operating hours: 24,000 h, pipe diameter: 100 mm, pipe length: 4,100 mm, bending angle: 183 °, bending radius: 300 mm, wall thickness: 8 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Credpotrd T Tofx Abuoh Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR

Condition: new, functionality: fully functional, Year of construction: 2024, machine/vehicle number: 50, laser power: 12,000 W, sheet thickness steel (max.): 100 mm, total length: 125,000 mm, warranty duration: 60 months, GX(Pro) Double Exchange Platform Sheet Fiber Laser Cutting Machine. Cjdpferuz Uxox Abusrh Working platform size: 3048mm*1524mm, 4064mm*2040mm, 6096mm*2540mm, 12500mm*2540mm; Laser source power: 3000 - 40000W Optional function: automatic loading and unloading system

Year of construction: 2017, condition: ready for operation (used), Additional Equipment Mold temperature control Automatic activation lamp Automatic last rotating Automatic mold slider closing Measurement & quality control tools Crjdpjxgwa Ssfx Abuoh This Kloeckner Desma PU D522/12-LDI was manufactured in 2017. Designed for PU injection and shoe production, featuring a 12-station setup with a clamping force of 70 kN. It includes a reaction injection molding unit, automatic mold slider, and motor capacity of 23.16 kW. Heating capacity stands at 45.50 kW. Contact us for more information about this machine. Application Types Injection Moulding

Condition: like new (used), Year of construction: 2011, operating hours: 3,200 h, functionality: fully functional, Firma Montrasio GmbH kann Ihnen dieses sofort lieferbare Maschine zur Verfügung stellen. Workpiece Data Workpiece Diameter (max.) Ø 850 mm Normal Module Range 5 – 20 mm Face Width (max.) 125 mm Number of Teeth (max.) 360 Basic Angle Setting Range ± 90° Tool Data Grinding Wheel Diameter (min. – max.) 229 – 508 mm (9 – 20") Grinding Wheel Height incl. Base Plate (max.) 135 mm Tool Spindle Seat HSK-E63 DIN 69893-5 Csdpfx Abjxizbxsuerh Grinding Spindle Rotation Speed (max.) 4,500 rpm Eccentric Speed (max.) 3,800 rpm Dresser Speed (max.) 6,000 rpm Nominal Grinding Spindle Power 27 kW Workpiece Spindle Seating Diameter (Oerlikon Outer Cone 1:4) – Seating Diameter (Inner Cone) Ø 203.2 mm (8") Workpiece Spindle Bore Ø 150 mm Work Spindle Depth 740 mm Workpiece Spindle Rotation Speed (max.) 40 rpm General Machine Data Total Connected Load (without Filter System) 60 kVA Machine Dimensions (including Filter System) approx. 5,790 x 4,500 x 3,280 mm Machine Net Weight (without Filter System) approx. 24,400 kg

Condition: used, Year of construction: 1988, x-travel 870 mm Codoxlkw Uepfx Abusrh y-travel 370 mm z-travel 400 mm table-size 310 x 1370 mm distance vertical spindle / table 50 - 450 mm feed - longitudinal/cross 20 - 800 mm/min 9 - 355 mm/min rapid traverse longitudinal and cross 3000 / 1375 mm/min spindle taper SK 50 spindle turning speed range 40 - 1750 U/min spindle speed: 12 Stück total power requirement 5,5 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 1,9 x 2,0 x 1,5 m - Powerful CNC universal milling machine - Includes Fanuc control system - Kneading milling head - Automatic feeds on X/Z/Y axes - Central lubrication system - Coolant system - Pivoting machine light - Splash guard tray - Separate transformer

Condition: used, Year of construction: 2012, Control Siemens 840 D weight of the machine ca. 13,5 t dimensions of the machine ca. 7m x 4m x 2,75m m Accessories: Coolant tank Grinding wheels Various spare parts Operating and maintenance instructions CE conformity Dimensions: 7x4x2.75 m ( LxWxH) TECHNICAL DATA: Workpiece data: max. outer diameter: 250 mm with max. grinding wheels Ø 450 mm max. diameter to be machined over table: 375 mm Profile depth for dressable grinding wheels: 40 mm max. workpiece length: 3,600 mm max. distance between centers (1): 2,800 mm max. bevel angle: +/- 90° Number of teeth of the workpiece: 1 - 999 max. weight of the workpiece: 250 kg Working area: Crodpfx Absxh Rqtjujh Center distance between workpiece and tool spindle: 355-170 mm Radial travel: 185 mm Axial travel: 3,000 mm Swivel angle: +/- 90°

Condition: used, Year of construction: 2004, Technical details: plate width: 2540 mm plate thickness: 2,5 mm distance between columns: 2830 mm stroke adjustment: 30 mm bending angle max.: 0 - 180 ° bending radius min.: 1,25 mm daylight opening: Oberwange: 200 mm back gauge - adjustable: kein Hinteranschlag mm height over floor: 900 mm total power requirement: 2,0 kW weight of the machine ca.: 1,7 t dimension machine xH: 3,35 x 1,0 x 1,5 m Hydraulic Folding Machine, electronically controlled. -max. sheet thickness at 400 N/mm² 2,5 mm according to manufacturer -smallest permissible bending radius 1.25 x sheet thickness Credpov S Aiyefx Abuoh -opening of the upper beam max. 200mm (motor driven) -bending trough is manually operated -Lower beam is fixed -operated by pushbutton / double foot switch *

Condition: used, Year of construction: 2018, functionality: fully functional, ∙ HT-30C (2018) - Used / Total Counter: 13,534 ∙ Language: Japanese ∙ Specifications - Untrimmed Book Size Max: 320 x 235 mm Min: 204 x 136 mm - Finished Book Size Max: 305 x 230 mm Min: 200 x 134 mm - Trim Width Max. 99.9 mm Min. 2.0 mm - Trim Height Max. 51 mm Crsdpfx Aexivkzsbujh - Maximum Cutting Thickness: 51 mm - Voltage / Frequency: 3-phase 200V 50/60 Hz - Production Speed Max. 440 books/hour (Book Thickness 25 mm, 2 stacked books) Max. 500 books/hour (Book Thickness 10 mm, 5 stacked books)

Condition: used, Ösmaschine / Eyeletting machine Hang Piccolo 101 Serial-No. ET107 Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Cedpexlr Syefx Abujrh

Condition: used, Year of construction: 2011, Sewing machine with inline end sheet tipper Meccanotecnica Universe Year: 2011 For high quality digital print finishing. The UNIVERSE SEWING performs 3 operations in standard mode: Sheet feeding, creasing, folding and collating and stitching. Cedpsu Utzyjfx Abuerh The UNIVERSE performs 2 operations: Nipping and end sheet gluing. Configuration: • flat sheet feeder • pc Siemens with touchscreen • GigaLynx sheet control • folding and collating station • thread sewing machine • belt delivery • transfer to the end sheet feeder • nipping press • end sheet feeder with Hotmelt nozzle gluing and ROBATECH premelter • belt delivery (counter approx. 9.700.000 mio. stitches) Technical specifications: speed plano sheet feeder: up to 300 plano sheet(A4)/min mechanical stitching speed: up to 50 folded sheets/min size range plano sheet max.: 420 x 640 mm size range plano sheet min.: 150 x 200 mm size range folded sheet max.: 420 x 320 mm size range folded sheet min.: 150 x 100 mm number of stitches max.: 10

Condition: used, Eckenrundstossmaschine / Corner Rounding machine Tränklein EK Serial-No. ET104 Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Crjdpfx Ajxlr Nfobujh