Used Wood Pole Lathe for sale (22,615)

Condition: excellent (used), CATALOG NUMBER 7726 TECHNICAL DATA - Loading hopper inlet – hydraulic lifting 1200x1000mm - Discharge for shredded wood diameter 200mm - Rotor working width 980mm - Main motor 37kW - Number of knives: 52 pcs - Knife size 40x40mm - Screen 20/25mm - Pressure drawer (hydraulic pusher) - Electric auto-reverse - Dimensions (L/W/H): 2520x2000x1740mm - Weight approx. 2500kg ADVANTAGES – German made – Screw conveyor for wood chips – Pressure drawer, toothed Gjdpjw Tbw Ajfx Afiebu – Knives as new – New counter-blade – Very good condition – Used wood chipper Net price: 106,900 PLN Net price: 25,150 EUR (rate 4.25 EUR) (Prices may change in case of larger fluctuations)

Condition: reconditioned (used), Year of construction: 2006, MAZAK QUICK TURN NEXUS 200-II MY Max. machining diameter: 380 mm Max. machining length: 538 mm Max. milling speed: 4,500 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm Machine is equipped with: - CNC control Mazatrol Matrix - KITAGAWA three-jaw chuck BB-208, diameter 210 mm - Tool Eye - C-axis - Y-axis - Interface for bar feeder - Automatic parts catcher - NC tailstock Gedpfjxlzp Iex Afijbu - Reinforced coolant pump - MAYFRAN chip conveyor - 8 fixed tool holders - 2 driven tool holders

Condition: good (used), Year of construction: 2006, Internal item no.: 25070 CNC Lathe Gjdpsxlzi Usfx Afisbu Index ABC Year of manufacture: 2006 Including bar loader (Breuning Profimat 42.6) Attention! The machine has a defective hollow clamping cylinder, which must be replaced. Other than that, the machine was fully operational until disassembly. Technical Data: Control: Siemens 840D Collet chuck: Hainbuch Number of spindles: 2 (main spindle / synchronized spindle) Spindle motor power: 29 kW Spindle bore: 52 mm Max. turning length: 280 mm Max. spindle speed: 5,000 rpm Turret 1 Number of tool stations: 8 Travel (X/Z): 90 mm / 280 mm Rapid traverse X/Z: 24 m/min / 24 m/min Feed force X/Z: 5,500 Nm / 5,500 Nm Turret 2 Number of tool stations: 6 Travel (X/Z): 81 mm / 80 mm Rapid traverse X/Z: 16 m/min / 24 m/min Feed force X/Z: 8,300 Nm / 5,500 Nm Machine weight approx. 3 t Space requirement approx. 6.0 x 2.0 x 2.0 m

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Gsdpfx Afow Hyd Asiebu Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21. If you are interested, the machine can be demonstrated under power/chip.

Condition: new, functionality: fully functional, The Brugger PX130 wood chipper is operated via the PTO shaft of a tractor and is capable of shredding logs with a diameter of up to 13 cm. The robust design and high-quality materials ensure reliable performance. With hydraulic feed, it is an efficient solution for wood processing in various agricultural and forestry applications. - Hydraulic feed - Diameter up to 13cm - Weight 420kg Gbodpfxorblwdj Afiou - PTO speed: 540 rpm - Horsepower tractor: 30-70 hp

Condition: good (used), Year of construction: 2019, operating hours: 14,400 h, Type of fuel: Diesel Number of owners: 1 Technical condition: good Visual appearance: good Gbjdexlxkpepfx Afiou Infeed: 16 cm Please contact Jonas Francken for more information

Condition: excellent (used), CATALOG NUMBER 7725 TECHNICAL SPECIFICATIONS - Loading hopper inlet: 1200x1000 mm - Outlet for shredded wood: diameter 200 mm - Rotor working width: 980 mm - Main motor: 22 kW - Number of knives: 24 pcs - Knife dimension: 30x30 mm - Screen: 16/11 mm - Pressure drawer - Electric auto-reversing system - Dimensions (L/W/H): 2600x2000x1720 mm Gbjdew S H Azjpfx Afiou - Weight: 2125 kg ADVANTAGES – German-made – Auto reverse – Pressure drawer – Very good condition – Used wood chipper Net price: 95,900 PLN Net price: 22,560 euro depending on exchange rate, 4.25 euro (Prices may vary with larger currency fluctuations)

Condition: as good as new (ex-display), The TDM S 430/1000 is a highly versatile Conventional Horizontal Lathe from KNUTH, designed to meet the demands of both single part and small batch productions in tool making and device construction. With an inverter that allows spindle speeds of up to 2,000 rpm and a user-friendly control panel, this lathe is ideal for training applications. Its robust construction features a one-piece heavy-duty cast-iron bed, ensuring increased rigidity and stability during operation. A modern 3-axis position indicator, adjustable longitudinal stops for automated feed shut-off, and a powerful coolant system further enhance its functionality. The TDM S 430 also includes an easy-to-read digital display for spindle speed, ergonomic selector levers for effortless control, and comprehensive standard equipment such as a 4-station tool holder and a robust LED work lamp. Experience precision and efficiency in your machining tasks with the TDM S 430/1000. Request a quote today to explore how this exemplary Conventional Horizontal Lathe can elevate your production capabilities. Gbsdpouyg Dnefx Afiou

Condition: used, Year of construction: 2016, IMPORTANT: The sale and delivery of this machine are strictly limited to customers whose registered office and delivery address are located within the European Union (EU). Delivery to recipients outside the European Union is excluded. Machine Details – PITTLER • Manufacturer: Pittler • Model/Type: LP03B • Serial Number: 2198 • Year of Manufacture: 2016 • TAR No.: 12244247 • Machine Weight: 19,500 kg • Country of Manufacture: Germany • CE Marked: Yes • Control System Manufacturer: Pittler T&S GmbH • Control System Type: Board PLS/G-RZ 10 Electrical Specifications: • Power Supply: 3-phase AC 400 V • Frequency: 50 Hz • Lighting Voltage: 42 V • Control Voltage: 230 V AC / 24 V DC • Control Fuse: 25 A • Max. Cable Length to Tool Head: 10 m Godpow Tidqefx Afiobu • Coolant Supply Line: Connection as per site requirements

Condition: used, Year of construction: 2008, turning diameter 900 mm turning length 1.600 mm control FANUC 21i TB turning diameter over bed 1.030/800 mm bar passage 160 mm travel -x axis 450 mm travel -z axis 1.650 mm speed X/Z 12 /16 m/min Godpfxsvzhcds Afiobu Machine on 30.337 h Cutting time 16.067 h total power requirement 64,4 kVA weight of the machine ca. 16 t dimensions of the machine ca. 5.760 x 3.145 x 2.780 mm

Condition: new, The Brugger PX170 wood chipper is operated by the PTO shaft of a tractor and is capable of shredding logs with a diameter of up to 17 cm. The robust design and high-quality materials ensure reliable performance. With hydraulic feed, it is an efficient solution for wood processing in various agricultural and forestry applications. - Hydraulic feed - Diameter up to 17cm - Weight 570kg Gbodpfx Aorblx Hofisu - PTO speed: 540 rpm - HP tractor: 40 - 100 HP

Condition: ready for operation (used), Year of construction: 2008, turning diameter over cross slide: 420 mm, spindle bore: 106 mm, turning diameter over bed slide: 650 mm, turning diameter over top slide: 420 mm, turning length: 2,000 mm, feed rate X-axis: 5 m/min, feed rate Z-axis: 10 m/min, total length: 1,900 mm, total width: 2,100 mm, total height: 1,900 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 1 rpm, overall weight: 5,100 kg, three-jaw chuck diameter: 650 mm, Equipment: rotational speed infinitely variable, The DMT Kern CD650 lathe is suitable for both precision operations and heavy-duty machining. It is ideally suited for small batch and single-piece production. Additional information: Weight: 5,100 kg Dimensions: Machine: 1.9 m + distance between centers x 2.1 m x 1.9 m (LxWxH) Gedpfxjw A Iu Ie Afisbu Control cabinet: 1.2 x 0.5 x 1.6 m (LxWxH) Accessories & options: C-axis with drilling, milling, and engraving cycles, including free ICP input Ethernet and USB interface for network connectivity Chip conveyor Original documentation Fixed and traveling steady rest Self-centering 3-jaw chuck Ø400 mm Bdoc Rx Trsw A Iu Iofvsg Independent 4-jaw chuck Ø600 mm Faceplate/claw plate Ø650 mm Various internal/external jaws Fixed and rotating centers Approx. 30 Multifix toolholders, type C Drill chuck with MK5 mount

Condition: used, Year of construction: 2006, functionality: fully functional, CNC FUSION 640 T, 8-inch chuck, machinable diameter 750 mm, between centers 511 mm, spindle bore 76 mm, automatic tool probe, chip conveyor. Year 2006. Gsdpfoxlr Tksx Afisbu

Condition: as good as new (ex-display), The Numturn S 560/1500 is a state-of-the-art CNC Flat Bed Lathe designed for the Lathes category, offering high performance for large workpieces. This machine boasts a robust box-way design that ensures maximum precision while facilitating heavy machining tasks. Its powerful Siemens servo motor drives the main spindle through a 4-step transmission, allowing for infinitely variable spindle speeds and high torque across various speeds. Equipped with an 8-station VDI tool changer, the Numturn S 560/1500 maximizes productivity and flexibility in operations. The user-friendly Siemens 828D control enables quick setup through two electronic hand-wheels, resembling manual lathe operation for enhanced user experience. With a hydraulic tailstock featuring high clamping force and a reliable automatic central lubrication system, maintenance is efficient and straightforward. For those looking to enhance their productivity, the Numturn S 560/1500 represents an excellent solution in CNC Flat Bed Lathes. To learn more about this machine or to request a quote, don’t hesitate to contact us. Gbodpfx Asuyg Ersfieu

Condition: good (used), Year of construction: 1967, Technical data: Centre height: 140 mm Turning length: 500 mm Accessories (included): Steady rest Multifix 'A' Collets 0.5 – 24 mm Milling attachment (Y axis) 3-jaw chuck 125 mm Faceplate 260 mm Live centre Drill chuck Die holder 4-jaw chuck Coolant pump Operating manual (German) Gbjdoxlr Hkspfx Afisu

Condition: excellent (used), Year of construction: 2014, operating hours: 7,690 h, functionality: fully functional, turning diameter over cross slide: 560 mm, turning length: 530 mm, turning diameter: 240 mm, spindle speed (max.): 5,000 rpm, For sale: CNC lathe, brand Weiler, model DZ 65. The machine is equipped with 12 driven tool stations and is in excellent condition with low operating hours. Package including accessories available for a total price of €65,000. Technical data: Year of manufacture: 2014 Gbsdpfeuxc Tcjx Afisu Control: Siemens 840D SL Operating hours: 7,690 h Bed arrangement: 45° slant bed Height of spindle center above floor: 1130 mm X travel: 207.5 mm Face length tip: 745 mm Z travel: 530 mm Turning diameter: 560 mm Rated power at 1000 rpm: 27 kW Spindle speed range: 50–5000 rpm Torque: 260 Nm Max. chuck size: 200 mm Spindle bore: 77 mm Spindle diameter at front bearing: 120 mm Bar capacity in draw tube: 65 mm Tailstock NC controlled Center taper: MK 4 Power: 4 MK Torque: 9.5 Nm Longitudinal travel: 525 mm Z-axis travel: 530 mm X-axis travel: 207.5 mm Z-axis rapid traverse: 30 m/min X-axis rapid traverse: 30 m/min Number of tool positions: 12 Tool shank cross-section: 20 x 20 mm Tool holder: VDI 30 Dimensions: 3180 mm x 2050 mm x 2200 mm Weight: 6300 kg Additional information: - Bar feeder hardware is pre-installed but requires activation - Supplied with chip tray only, chip conveyor available from Weiler - Equipped with oil skimmer - Offer does not include tool holders and collets, but these can be included upon request Transport and loading can be arranged at extra cost, Europe-wide. Prices are plus VAT. Inspection possible by appointment. Please contact us – our team is happy to support you. Trade-ins or exchanges possible! Machinery purchase/sale BUY/SELL OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell your machine? For further information or contact options, please visit our website.

Condition: new, With the Brugger Power Split S22, we present a powerful vertical log splitter with an impressive splitting force of 22 tons. This robust machine is ideal for a wide range of applications and offers maximum drive flexibility - whether via the electric motor or the PTO shaft. The splitting process takes place at two speeds, which enables the wood to be processed quickly and efficiently. Gbodpfxstrlv Sj Afieu Special features: - 22T splitting pressure - Combined drive: 5kW electric motor & PTO drive - Weight: 335kg - up to 110cm log length - Log lifter - Two speeds A log lifter is included in the scope of delivery to facilitate the handling of heavy logs. A hydraulic cable winch is available as an option, which offers additional application options and makes work even easier. With a maximum splitting length of 110 cm, the Brugger Power Split S22 offers the flexibility to process even larger pieces of wood with ease. A support table for shorter pieces of wood is also available. The Brugger Power Split S22 is the ideal choice for anyone looking for a reliable and powerful solution for splitting wood - whether for professional or private use. Prices: Power Split S22 = 2.670€ Power Split S30 (30 tons) = 2.960€ Support table for short logs = 125€ 4 compartment splitting wedge = 99€ Hydraulic cable winch = 595€ Contact us for your customized offer!

Condition: reconditioned (used), Year of construction: 2012, MAZAK QUICK TURN NEXUS 250-II MSY Max. turning diameter: 380 mm Max. turning length: 511 mm Max. milling speed: 4,500 rpm Max. main spindle speed: 4,000 rpm Max. sub-spindle speed: 6,000 rpm Max. bar capacity: 74 mm Machine equipped with: - CNC control Mazatrol Matrix 2 - KITAGAWA three-jaw chuck for main spindle, diameter 254 mm - KITAGAWA three-jaw chuck for sub spindle, diameter 169 mm Gjdpfswy Dvcjx Afijbu - Tool eye - C-axis - Sub spindle C-axis - Y-axis - Interface for bar feeder - Automatic parts catcher (dual) - Reinforced coolant pump - Chip conveyor - 8 static tool holders - 2 driven tool holders

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 550 kg, fuel: super 95, cutting length (max.): 600 mm, Automatically saw and split wood with the RM480-B from H&R. The H&R Log Splitter RM480-B is the ideal assistant for your firewood preparation. The new 2026 model impresses with state-of-the-art technology and high performance for efficient sawing, splitting, and conveying of firewood. Thanks to the innovative design and powerful hydraulic system, work with this splitting machine becomes significantly easier – perfect for professional forestry operations and ambitious DIYers. Unlike competitors, the RM480 from H&R features FULLY hydraulic operation for ALL functions, allowing the work to be completed faster and more easily. Product features RM480-B Performance: The splitter is equipped with a powerful 15 HP petrol engine (RM 480 B). Alternatively, it is also available with a 13 HP electric motor (RM 480 E). Log length and diameter: Logs up to 3 metres long can be securely placed on the sturdy standard table. The splitter handles logs up to 48 cm in diameter and cuts them to lengths up to 60 cm. Hydraulic system: The machine features a hydraulic saw bar. The hydraulic log clamp ensures secure fixation of the wood during the splitting process. Hydraulic height adjustment of the splitting cross is possible. You can choose between the supplied 4-way and 6-way splitting wedges – for flexible splitting patterns and individual adaptation to your needs. Conveyor belt: The newly designed 2.2 m feed belt facilitates log loading, while the laterally pivoting discharge belt makes transferring the split wood effortless. Mobile use: The splitter weighs only 750 kg including the trailer, and thanks to its practical transport frame, it can be moved by hand without difficulty. Easy operation: All functions can conveniently be operated hydraulically, making it suitable for extended operating periods. At a glance • Sawing, splitting, and discharge in one working step • All functions hydraulically controlled • Efficient, powerful engine • Splits wood up to 48 cm in diameter and 60 cm in length • Logs up to 3 m long (up to 6 m with accessory table!) Price Petrol engine (15 HP) RM 480 B (net) €7,385.71 Electric motor (13 HP) RM 480 E (net) €7,550.00 Additional options With the optional lifting table or chain conveyor, logs up to 6 metres in length can be effortlessly processed. Technical details Weight (incl. trailer): 750 kg Freight cost: €300 (transported in steel frame, without hydraulic oil) Final assembly time: approx. 4 hours Gjdpou Dnrujfx Afijbu Max. log diameter to split: 48 cm Max. log length to split: approx. 60 cm Max. log length: 300 cm Engine: Petrol, 15 HP Displacement: 420 cm³ Engine oil: 10W30 Hydraulic oil: 46 Hydraulic connections and control levers are already preinstalled, so the machine is ready for operation within a very short time. Benefit from the powerful and well-designed technology of the H&R log splitting machine RM 480. Order today and make your firewood processing more efficient, safer, and more convenient!

Condition: good (used), Year of construction: 2013, functionality: fully functional, Control: CNC path control including 15" TFT SlimLine Panel Siemens 840 D SL 4.4 with Shop Turn and freely programmable DMG Smartkey Operating hours: 38,495 h Gbjdow Eb D Uepfx Afiju Program run time: 21,047 h TECHNICAL DATA Swivel range * Over bed: 330 mm * X-slide: 260 mm Max. turning diameter: 200 mm Chuck diameter: 210 mm Center height: 190 mm Axis distance: 581 mm Travel * X-axis: 160 mm * Z-axis: 450 mm Drive power (40/100% duty cycle): 16.5 / 11 kW Torque (40/100% duty cycle): 166.5 / 112 Nm Max. speed: 5,000 rpm Spindle mount (flange): 140 h5 Spindle bore: 68.5 mm Max. bar capacity: 51 mm Rapid traverse (X/Z axes): 30 m/min Feed forces (X/Z axes): 4,500 Nm C-axis Speed range: 0–100 rpm Torque: 112 Nm Rapid traverse: 100 m/min Positioning accuracy:

Condition: good (used), Year of construction: 1997, wood band saw, band saw machine, band saw, vertical band saw -Manufacturer: OSM ØLSTYKKE SMEDE, vertical band saw with large work table -Type: RBMR 130-125 -Drive: 1.5 kW Gbjdpfxow Dzfis Afiju -Projection: 1390 mm -Cutting width: max. 1260 mm -Cutting height: max. 1400 mm -Saw band: 7650x20x0.45 mm, incl. additional band saw blade -Saw blade guide: motor-driven height-adjustable -Work table: 2360 x 2140 mm -Dimensions: 3980/3000/H2740 mm -Total weight: kg

Condition: good (used), Year of construction: 2004, functionality: fully functional, Fanuc control, spindle bore 66 mm, sub-spindle, bar feeder, chip conveyor, parts conveyor belt. Gbodpfxow Ibuds Afisu

Year of construction: 1967, condition: used, LatheFabr. Weipert Type W500 turning diameter 500 mm Turning length 1000 Gedpsh Rwklofx Afiebu

Condition: used, Year of construction: 1988, Used machine Year of manufacture: 1988 Features and technical data: Robust, high-performance wood lathe made from grey cast iron Headstock and precision lathe bed made of high-quality grey cast iron with milled and ground bed guide Tailstock and tool rest (180 mm) also made of cast iron, easy and precise to move, equipped with eccentric quick-clamping Simple, rapid speed change by repositioning the V-belt Spindle with M 33 thread and MK 2 internal taper, handwheel for braking Motor: 1 HP Speeds: 750-1500-2500 rpm via a three-step pulley, with optical speed display Centre distance: 800 mm Centre height: 200 mm Dimensions: 1580 x 400 x 1180 mm Gbedpfxjxllv Sj Afiou Weight: approx. 130 kg Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 550 kg, cutting length (max.): 600 mm, Automatic Wood Sawing and Splitting with the RM480-E from H&R. The H&R Wood Processor RM480-E is the ideal assistant for your firewood processing operations. The new 2025 model impresses with state-of-the-art technology and high performance for efficient sawing, splitting, and conveying of firewood. Thanks to its innovative design and powerful hydraulic system, operating this wood processor is significantly simplified—ideal for professional forestry operations and ambitious DIY users alike. Unlike competing models, with the RM480 from H&R, ALL functions are hydraulically operated, allowing for faster and easier workflow. Product Features RM480-E Performance: This processor is equipped with a robust 13 HP electric motor. Alternatively, it is also available with a 15 HP petrol engine (RM 480 B). Log Length and Diameter: Logs up to 3 meters in length can be securely placed on the sturdy standard table. The splitter handles logs up to 48 cm in diameter and cuts them to lengths of up to 60 cm. Hydraulic System: The machine features a hydraulically lowering saw bar. The hydraulic log clamp ensures secure fixation of the wood during splitting operations. Hydraulic height adjustment of the splitting wedge is possible. You can choose between the included 4-way or 6-way splitting cross—for flexible splitting patterns and individual adaptation to your needs. Conveyor Belt: The new 2.2 m long feed belt makes loading logs easier, while the lateral swivel discharge conveyor makes the removal of split wood effortless. Gbodou Dkufspfx Afieu Mobile Operation: The processor—including trailer—weights just 750 kg and can be easily moved by hand thanks to its practical transport frame. Simple Operation: All functions can be conveniently operated hydraulically, enabling long working hours without fatigue. At a glance: • Sawing, splitting, and conveying in a single work step • All functions hydraulically operated • Efficient and powerful motor • Splits wood up to 48 cm in diameter and 60 cm in length • Can handle logs up to 3 m in length (with accessory table even up to 6 m!) Price Electric Motor (13 HP) RM 480 E (net) €7,550.00 Petrol Engine (15 HP) RM 480 B (net) €7,385.71 Additional Options With the optional lift table or a chain conveyor, logs up to 6 meters in length can be processed effortlessly. Technical Details Weight (incl. trailer): 750 kg Shipping cost: €300 (transport in iron frame, without hydraulic oil) Final assembly time: approx. 4 hours Max. split wood diameter: 48 cm Max. split wood length: approx. 60 cm Max. log length: 300 cm Motor: Electric, 13 HP Hydraulic oil: 46 Hydraulic connections and control levers are pre-installed, making the machine operational in no time. Take advantage of the powerful and well-engineered technology of the H&R RM 480 wood processor. Order today and make your firewood processing more efficient, safer, and more comfortable!