Used Wood Drying Chamber for sale (10,308)

Year of construction: 2014, condition: like new (used), fully automatic supply and exhaust 3 chambers Fjdpfsvzuutsx Aa Ejpd chamber dimensions 6.5 x 4 x 4.1m furnace power 350kW

Year of construction: 2026, condition: reconditioned (used), functionality: limited functionality, machine/vehicle number: 559, Dryer optimized for thick timber or hardwood Usable length: 5000 mm Usable height: 1100 mm Usable width: 1100 mm New electrical cabinet and sensors Controlled drying function Fpjdpfx Aasya Ik Aj Eod Missing external rail and trolley (can be supplied or we will assist the buyer with fabrication) Dryer can be inspected in department 74

Condition: excellent (used), Here we offer you a chamber dryer. Outer dimensions approx. width: 1.885 mm depth: 1.200 mm height: 2.425 mm Fedpjgm Hwuofx Aa Eopd Usable space dimensions approx. width: 1.030 mm depth: 1,000 mm Height: 2,100 mm Usable space: 2.2 m³ Nominal temperature: 100 °C Working temperature: 85 °C Heating medium: 3 x 400 V, 50 Hz Heating capacity: 20 kW Circulating air volume: 4,500 m³/h / 400 Pa Motor power: 1,1 kW Protection class: IP 54 The chamber heating furnace must not be used for flammable or explosive substances. The chamber heating furnace must not be installed in the Ex-area. Paternoster device External dimensions: Height: 1,880 mm Width: 809 mm Depth: 950 mm support sets: 13 pieces Pitch: 228 mm Carrying set width: 354 mm Carrying set depth: 320 mm useful height: 135 mm Power of drive motor: 0.25 kW at 189 Nm Transport speed: on average 5 m/min. Payload/carrier set: max. 10 kg total payload: max. 130 kg total weight loaded: max. 730 kg year of construction: 2005 Type: Ke/SO Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, data are reserved!) Further questions we can answer on the phone for you.

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: Nr.50086, New machine for sale due to circumstances: 6 connection points with ventilation duct. Collection only! Price ex location 31637 Rodewald. Fpedpfew Uf S Hsx Aa Eed

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: Fedpowp Rqfsfx Aa Espd • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: used, 2 fans: 2/ 0.75KW Fpedjm H Utfjpfx Aa Ejd Compressor: 5KW Water heater: 9KW Refrigerant: R134A-3.8kg Tension: 380V Congestion: 110cm/80cm/H185cm Weight: +-500kg Voltage: 380V 6900 € Reference: Wood dryer with dehumidification system

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. • Control installed on the swivel arm for better access • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs Fpodpfx Aefzq Stoa Ejd • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. • Control installed on the swivel arm for better access • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Fjdoflmdbspfx Aa Espd Prices are given in the catalog

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. • Control installed on the swivel arm for better access Fodpfefy T Szjx Aa Espd • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: GSVW-3080-1250-1-F, Cross-flow vacuum dryer with 31.68 m³ capacity The chamber holds 1 package in width at 1.20 m, 3 packages in height at 0.80 m with 0.10 m thick spacer timbers, with a maximum wood length of 16.0 m plus 0.5 m clearance. The chamber holds a net of approx. 19 m³ of trimmed timber with a wood thickness of 50 mm and a stacking stick thickness of 24 mm. Usable space: width 1.20 m, height 2.70 m, length 12.0 m Technology (see detailed performance description under Documents) - Stainless steel cylinder with 80 mm thick resin-bonded rock wool insulation and a ventilated external aluminum trapezoidal sheet cladding. - A vacuum door with special lock for easy end-side loading with walk-on trolley. - A vacuum water ring pump with a capacity of 5.5 kW evacuates the dryer (to be replaced in April 2025). - For air flow through the stacks, 12 fans with 1.5 kW rated power each in delta configuration. The average power consumption in vacuum is only about 0.5 kW per fan. - Hot water heat exchanger for max. 98 kW at 90°C supply temperature installed - The electrical connection is 47 amperes at 3 x 400 V / 50 Hz. - Excess moisture is condensed out via air heat exchangers. - The chamber climate can be humidified as needed using a hot water heated evaporation basin. - The chamber dries fully automatically. Only the wood type, wood thickness, and desired final moisture need to be entered. - Control MB4000 V including control panel - 10 wood moisture measuring points as well as climate and temperature sensors - Run-out rails must be re-ordered, as these are concreted in. Fpsdpfx Aewrb Nkoa Eod The price is ex works and must be paid net before dismantling the plant. The plant must be dismantled or removed by the buyer. Dismantling is not included in the price.

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Fpodpoq Igyvefx Aa Ejd Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Year of construction: 2019, condition: ready for operation (used), overall weight: 12,000 kg, total height: 4,500 mm, This LINYI JIANZHONG WOOD MACHINERY JJC-CP was manufactured in 2019. It features a maximum pressure of 500 tons, adjustable for various applications, and can handle filling sizes up to 1300 x 2500 mm. With a capacity of 6 batches per hour and a total weight of 12000 kg, this carcase press is CE marked, ensuring compliance with safety standards. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Max pressure: 500 t (adjustable) • Filling height: 900 - 1300 mm • Max filling size: 1300 x 2500 mm • Press position: approx. 500 mm below floor level • Feeding table: 2000 x 1960 mm • Pick-up table: 2350 x 2500 mm • Capacity: 6 batches per hour • Ce marking Extra Information Machine still under power Dimensions Fjdpfjyaqgmjx Aa Espd Machine Depth 3600 mm

Condition: used, Year of construction: 2005, functionality: fully functional, cutting length (max.): 6,500 mm, input voltage: 400 V, - Year of manufacture: 2005 - Electrical diagram - Electric motor: 15 kW - Log cutting length: up to 6.5 meters - Control: stationary control panel - Additional equipment: - Hydraulic loading - Hydraulic hold-down - Hydraulic log turner - Roller adjustment - Debarker (for removing bark prior to cutting) - Dual-function hold-down - Side stops Fpedoyrdg Depfx Aa Eed - Leveling rollers Machine dimensions: - length: 750 cm - width: 220 cm - height: 240 cm - weight ~1700 kg

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, operating hours: 2,520 h, type of input current: three-phase, cutting length (max.): 4,800 mm, saw blade length: 4,010 mm, Wood-Mizer LT20B bandsaw, equipped with the corresponding BMS 250 automatic blade sharpener and BMT 100 manual blade setter. Electric motor: - 11 kW Log cutting length: - up to 4.8 meters Control: - stationary control panel - electric height adjustment - electric dimension adjustment Additional equipment: - Cutting thickness counter - Blade lubrication system: Lube-Mizer - electric height adjustment - electric feed Machine dimensions: Fpodpfx Aex Hql Doa Eed - Length: approx. 750 cm - Width: approx. 220 cm - Height: approx. 240 cm

Condition: as good as new (ex-display), Year of construction: 2023, cutting width (max.): 550 mm, overall weight: 800 kg, Wood-Mizer MS750L Panel Saw for Professional Cutting of Furniture Boards Machine used for training and demonstrations, serviced and factory-set. Processing parameters: Max. cutting thickness (perpendicular): 97mm Max. cutting thickness at 45°: 69mm Cutting length: 3020mm Technical specifications: Main saw blade Spindle diameter: 30mm Saw blade diameter: 300-400mm Blade tilt adjustment range: 0-45° Saw blade speed: 4500 rpm Scoring unit Scoring spindle diameter: 20mm Fedpfx Aasyr Dg Ds Eepd Scoring blade diameter: 120-125mm Scoring blade speed: 8000 rpm Sliding table (aluminium) Table length: 3020mm Table width: 416mm Table stroke length: 3580mm Working table (cast iron) Table length: 1050mm Table width: 550mm Table height: 885mm Table extension: 895x1000mm Main motor: 6kW Scoring motor: 0.75kW Electric adjustment of blade height and tilt Pneumatic longitudinal clamp with distribution Extraction ports: 1x100mm, 1x60mm Weight: 800kg

Condition: as good as new (ex-display), Year of construction: 2022, Wood-Mizer MS300 High-precision table saw Machine used for training and demonstrations, checked and factory-adjusted. Fjdpfx Aoyr Dfaoa Ejpd Processing parameters: Max. thickness at perpendicular cut: 100 mm Max. thickness at 45° cut: 65 mm Technical specifications: Circular saw Arbor diameter: 30 mm Saw blade diameter: 315 mm Max. blade width: 4 mm Blade tilt adjustment range: 0–45° Distance between blade and parallel fence: 800 mm Saw blade speed: 4,500 rpm Sliding table (aluminum): Table length: 1,400 mm Table width: 350 mm Sliding stroke: 1,235 mm Sliding table extension: 500 x 360 mm Working table (cast iron): Table length: 900 mm Table width: 750 mm Table height: 850 mm Table extension: 520 x 150 mm Motor: 3 kW Extraction ports: 1x100 mm, 1x60 mm Weight: 260 kg

Condition: as good as new (ex-display), Year of construction: 2024, Wood-Mizer MP365 High-end four-sided planer/moulder with additional fifth head Machine used for training and demonstrations, checked and factory set. Machining parameters: Four-sided: Planing width: 15–350 mm Planing height: 10–160 mm Double-sided: Planing width: 10–410 mm Planing height: 10–230 mm Single-sided: Planing width: 10–510 mm Planing height: 10–230 mm Feed speed: 3–15 m/min Technical specifications: Fodpfx Aajyr Ddvs Eopd Top shaft – straight knives 510 mm, 2 pcs, 6000 rpm Bottom shaft – straight knives 410 mm, 2 pcs, 6000 rpm Side shafts – 30 mm spindle, straight knives 50 mm, 2 pcs, 6000 rpm, max side head height 160 mm Fifth shaft – 30 mm spindle, 3000, 6000, 9000 rpm, tilt angle 270°, max head height 130 mm Motors: Top shaft – 5.5 kW Bottom shaft – 4 kW Side shafts – 3 kW Fifth shaft – 3 kW Feed – 0.75 kW Total motor power: 19.25 kW 3 phase, 400 V, 50 Hz, 31.4 A Extraction ports – 4x100 mm, 1x125 mm Weight: 1055 kg

Condition: as good as new (ex-display), Year of construction: 2024, Wood-Mizer MP260 Compact and versatile four-sided planer moulder Machine used for training and demonstrations, inspected and factory-set. Fitted with a new polyurethane feed roller. Processing parameters: Four-sided: Planing width: 40–260 mm Planing height: 10–100 mm Double-sided: Planing width: 10–300 mm Planing height: 10–220 mm Single-sided: Planing width: 10–410 mm Planing height: 10–220 mm Constant feed speed: 8 m/min Technical specifications: Top shaft – straight knives 410 mm, 2 pcs, 6000 rpm Bottom shaft – straight knives 300 mm, 2 pcs, 6000 rpm Side shafts – 30 mm spindle, straight knives 50 mm, 2 pcs, 6000 rpm, max. height of side heads – 100 mm Motors: Top shaft – 3 kW Bottom shaft – 3 kW Side shafts – 3 kW Feed – 0.25 kW 3-phase, 400 V, 50 Hz, 27.45 A Extraction ports – 3x100 mm, 1x125 mm Weight 440 kg Fpsdpfx Aaeyr Dc Eo Esd

Condition: used, Year of construction: 2022, Wood-Mizer MP260 Compact and versatile four-sided planer/moulder Machine from the Wood-Mizer machine exchange program, inspected and factory set. Excellent technical condition, long tables, new side pressure rollers, polyurethane feed roller, sharp knives. Machining parameters: Four-sided: Planing width: 40–260 mm Planing height: 10–100 mm Two-sided: Planing width: 10–300 mm Planing height: 10–220 mm Single-sided: Planing width: 10–410 mm Planing height: 10–220 mm Fpodpfx Aajyr Dcro Eed Feed speed adjustable: 2–11 m/min Technical specifications: Top shaft – straight knives 410 mm, 2 pcs, 6000 rpm Bottom shaft – straight knives 300 mm, 2 pcs, 6000 rpm Side shafts – 30 mm spindle, straight knives 50 mm, 2 pcs, 6000 rpm, max. side head height – 100 mm Motors: Top shaft – 3 kW Bottom shaft – 3 kW Side shafts – 3 kW Feed – 0.37 kW 3-phase, 400 V, 50 Hz, 27.45 A Extraction ports – 3 x 100 mm, 1 x 125 mm Weight: 440 kg

Condition: as good as new (ex-display), Year of construction: 2024, Wood-Mizer MP200 Planer-Moulder Fedoyr Dclspfx Aa Espd Simultaneously planes and profiles from both sides Machine used for training and demonstrations, inspected and factory-set. Working parameters: double-sided planing width 10-300 mm planing height 15-100 mm min material length 470 mm single-sided planing width 10-400 mm planing height 15-210 mm Feed speed 2-11 m/min Technical specifications: upper shaft – straight knives 410 mm, 2 pcs, 6000 rpm side shaft – spindle 30 mm, straight knives 50 mm, 2 pcs, 6000 rpm Motors: upper shaft – 2.7 kW side shaft – 2.7 kW feed – 0.37 kW 3-phase, 400 V, 50 Hz, 16A Extraction ports – 1x100 mm, 1x125 mm Weight 370 kg

Condition: as good as new (ex-display), Year of construction: 2022, Wood-Mizer MP180 Universal planer – jointer, double-sided planer, spindle moulder. Machine used for training and demonstration purposes, fully tested and factory set. Fjdpfsyr Dcfox Aa Ejpd Processing parameters: Double-sided: planing width: 10-300mm planing height: 10-100mm Single-sided: planing width: 10-400mm planing height: 250mm Feed speed steplessly adjustable 2-11 m/min Technical specifications: Upper shaft – straight knives 410mm, 2 pcs, 6000 rpm Side shaft – spindle 30mm, straight knives 50mm, 2 pcs, 6000 rpm Motors: Upper shaft – 4kW Side shaft – 3kW Feed – 0.37kW 3 phase, 400 V, 50 Hz, 16 A Extraction ports – 2x 100mm Weight 362kg

Condition: excellent (used), Year of construction: 2024, Model: CNC5003 Notes: Condition: Ex-demo CNC5003 is a state-of-the-art CNC machine, designed from the ground up to industrial standards for durability and process stability. The machine is specifically engineered for wood, panel materials, plastics, foam, composites, and light alloys. • FANUC controller • Working area: X - 3080 mm Y - 1540 mm Z - 200 mm Fjdpfxjyr Dawe Aa Ejpd • 6-zone vacuum table • HSK63 11kW 24000rpm electrospindle • Tool magazine (12 slots) Additional information • The vacuum table is divided into 6 zones, each with an individual valve. Each zone features 36 individually sealed vacuum points, providing a total of 216 individually sealable vacuum points. • Electrospindle: Our standard spindle motor is a high-power 11 kW unit with HSK63F. The spindle is driven by an inverter and reaches speeds up to 24,000 rpm. The spindle motor is equipped with ceramic bearings. • Automatic Tool Changer (ATC): The machine comes with a 12-position tool changer mounted on the gantry for fast tool changes. • The ATC magazine is conveniently accessed via a hatch for easy maintenance.

Condition: excellent (used), MX7504 CNC Wood Router – Automatic Tool Change – Industrial Woodworking Machine For sale: MX7504 CNC woodworking router, suitable for furniture production and automated wood processing. The machine is equipped with an automatic tool change system (ATC) and a touchscreen CNC control, allowing precise and efficient machining. Technical specifications Model: MX7504 Fodpfx Aaeyq Riis Eopd Type: CNC wood router Axes: 3-axis CNC Automatic tool changer (ATC) Spindle motor: approx. 4–6 kW Control system: touchscreen CNC Power supply: 380 V / 3 Phase Heavy industrial construction Applications Furniture manufacturing Panel processing MDF / plywood machining Automatic drilling and milling Condition Machine is in good working condition and ready to use.

Condition: new, Year of construction: 2023, cutting length (max.): 5,100 mm, cutting width (max.): 860 mm, saw blade width: 380 mm, saw blade length: 5,000 mm, WM4000S industrial band saw with operator's cabin Drive: Electric motor: 22 kW Cutting parameters: Maximum cutting length: 5.1 m with board removal system Maximum cutting width: 86 cm Bed and head: Debarker Head movement (front/back): electric Advanced touchscreen display Saw guide arm: electric Double saw guide roller Automatic saw lubrication Pneumatic saw tensioning Servo motor (up/down) Board removal conveyor 1.7 m Pantograph Reinforced bed Hydraulics: 2 vertical side supports 2 chain turners 1 main clamp 1 drive roller 1 side roller 2 clamps Hydraulic pump 7.5 kW Saw blade: Length: 5000 mm Width: 38 mm Wheel diameter: 635 mm Year of manufacture: 2023 Price: PLN 530,000.00 Fpedpfoypk Rdox Aa Eod PLN 399,000.00

Condition: used, Year of construction: 2019, operating hours: 26,917 h, functionality: fully functional, cutting length (max.): 6,100 mm, saw blade width: 380 mm, saw blade length: 4,670 mm, Machine specification: LT70ME20SAH3-SWR CUTTING DIMENSIONS: - max log diameter: 95 cm - clearance between rollers: 73 cm - max cutting height: 39 cm HEAD EQUIPMENT: - SW-10 SETWORKS automatic cutting thickness setting device - head feed up/down – electric - head feed forward/backward – electric - blade guide arm – electric Fpsdpfx Aeypk E Uoa Esd SAWBLADE – length 4670 mm, width 38 mm Blade guide wheels: 600 mm Type: with belt Material: cast iron STANDARD HYDRAULICS: - 3 side supports - central clamp on two rods - comb-style log turner - 2 x leveling rollers - 2x dual-function clamps - loading arms Used machine, fully technically refurbished. All components checked and replaced as necessary. Very good technical condition, fully ready for operation. Additional advantage: extended warranty – 6 months. YEAR OF MANUFACTURE: 2019.09.04 ENGINE HOURS: 26,917 Price: 110,000 PLN net