Used Wood Chip Heating for sale (34,320)

Condition: ready for operation (used), Year of construction: 1985, Disc chipper for production of cellulose chips. Kedew Ib R Eopfx Afijdu Iggesunds "turnable chipping knife system" Capacity up to 1200 m3 of ready made chips per hour In-feed opening 760 mm Diameter chipping disc: 3400 mm Net weight: 27000 jg

Condition: excellent (used), Year of construction: 2019, operating hours: 3,631 h, color: green, total height: 3,400 mm, total length: 6,850 mm, total width: 2,860 mm, General Information Year of Manufacture: 2019 Applications: Forestry and Land Management Technical Information Power: 441 kW (600 HP) Number of cylinders: 6 Engine displacement: 18,100 cc Fuel type: Diesel Drive: Track Unladen weight: 26,700 kg Functional Kdjdpfxow Eu Aqo Afiou CE marking: yes Condition Technical condition: very good Visual condition: very good

Condition: used, Tunnissen TS 532 shredder    • Throughput 260 mm    • Equipped with slow traffic chassis Ksdpfx Afswzcdzeijdu    • Wide tires    • Own license plate    • Optionally for sale as a combination, see reference 12298 Condition: Used Year of manufacture: 0

Condition: new, Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) Power: 18,5 kW Shaft length: 550 mm Shaft diameter: 222 mm Shaft RPM: 120 rpm Number of cutting knives: 14 Granulation: 10-30 mm Capacity: up to 4 m3/h (depending on the wood) Material discharge opening: 160 mm Material: Plastics, cardboard, wood (chipboards, MDF boards, waste,...) Filling opening: 946 x 567 mm Dimensions L/W/H: 1880/1120/1670 mm Weight: approx. 1250 kg 2 years warranty or 2000 working hours Advise used machines: Kdodpfjgw Sxzex Afisu • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Year of construction: 2005, condition: excellent (used), engine power 55 kW sieve diameter 6 mm Kdedelx Ndljpfx Afisu rotor width 450 mm

Condition: like new (used), Year of construction: 2007, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 2841, first registration: 01/2007, maximum load weight: 1,100 kg, fuel: electricity, SAOM SRL wood chipper for sale with just hours of use, practically unused. It is stored for lack of use, and works perfectly. Kodpfxjridufe Afisdu

Condition: ready for operation (used), Technical characteristics shaft length Ø 500 mm 4 knives Rotation du rotor1500 tr/mn Type de recyclageShredder Kjdpfx Aetxk S Hofiodu Power and Motors Voltage: 380 V Pluging: Three-phased Power: 30 Kw Overall dimensions

Condition: as good as new (ex-display), Demonstrator with 7 operating hours Another machine available immediately (ex works in Neckartailfingen) MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slide gate Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Included: - Raise the shredder by 30 cm (prepared for conveyor belt) Additional shredder options: - Articulated conveyor belt + €8,770 net Kdodpfx Aev Sqrpjfieu Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €6,780 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: excellent (used), functionality: fully functional, color: blue, A completely rebuilt BRUKS 1500M machine, ready for immediate operation. The machine is designed for efficient wood crushing, wood chip production and is suitable for industrial use. Kedjv Evp Hopfx Afiodu Number of blades: 3. Main motor: 60 kW. Weight: 4800 kg.

Condition: new, operating hours: 2 h, Special, patented shape of the ROTOR! Motor power: 11/ 15/ 18 kW, 400 V, 50 Hz Rotor width: 595 mm Rotor speed: approx. 45 rpm Rotor diameter: 280 mm Sieve: hole size 7 to 30 mm (optionally hardened special steel) Cutting crowns: 34 pieces 25×25 mm (hollow ground, 4-way reversible, hardened special steel) Counter blade: up to 2 pieces (2-way reversible, optionally hardened special steel) Throughput*: up to 2 m3/h (*depending on material) Material feed opening approx.: 600 x 350 mm Solid main bearings compact control cabinet with modern PLC control & 5m cable length Kodpfx Afshq T Udsijdu Suction diameter: 200 x 200 mm Dimensions L x W x H approx.: 1,050 x 1,180 x 1,890 mm Weight: approx. 900 kg 2000 hour guarantee on the high-performance gearbox

Year of construction: 2019, condition: refurbished (used), Overband plate magnet Version in VA 1.4301 tightly welded Ksdpfx Afod Dzaheiodu 420 x 250 x 100mm completely welded housing Ring eyelets for suspension

Year of construction: 2025, condition: new, Screening plant for screening wood chips Design: stationary or semi-mobile New production Screening capacity: approx. 20 - 40 m³/h (depending on design) consisting of: - Vibrating hopper type AVB - Screening machine type ASM - Bottom frame / hook lift (option) - Trough belt conveyor belt type MFB - Electrical installation Functional description and mode of operation: The woodchips are fed into the vibrating hopper by means of a wheel loader. The wood chips then pass onto the oscillating screen type ASM. The screen separates the wood chips into three size classes (overlengths, chips, dust). The fractions are discharged from the wood chip screen by means of conveyor belts. The capacity of the screening machine (depending on the design) is between 20 - 40 m³/h for wood chips. Advantages: - High screening capacity - High separation efficiency - Low noise and low maintenance Kdedjin Ewlspfx Afisu - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you.

Condition: used, Wood chip screening plant Chip screening plant Width 1,9m Length 5.3m Height 0.8m 1st grid 40x40mm 2nd grid 15x15xmm Double scraper for screening system Total length 7.5m (2m straight, 5m upwards) Outer flange width 760x610mm Scraper width 400mm + 250mm Kodpfx Afstxblkjisdu Gear motor 4 kW Speed 39 rpm

Condition: new, Year of construction: 2025, Delivery time approx. 3-4 months MRZ 830 Shredder Kdedpfxsd Dgw Uj Afiju Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slider Screen perforation of your choice (10 - 40 mm) Suction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Additional shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) + €2,140 net - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €5,980 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - Moisture content (dry) must be below 30% - Installation temperature: temperature-controlled room at least +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: excellent (used), Year of construction: 2022, operating hours: 210 h, functionality: fully functional, power: 100 kW (135.96 HP), fuel type: diesel, color: silver, axle configuration: 1 axle, maximum load weight: 6,500 kg, The BBT 400 Woodzilla is a 360° swiveling, compact, powerful, mobile drum chipper with aggressive feed, mounted on a truck trailer chassis. Technical data Year of manufacture: 2022 Operating hours: approx. 210 hours Drive: diesel, Deutz TCD 3.6, 100 KW (136 HP), Stage 5 Feed: 320 x 500 mm Chipping drum: 400 x 500 mm, 4 knives Maximum trunk diameter: 32 cm Length of feed table: 1300 mm Support: 4-way hydraulic Z-crane Ben-Tele 550 2 additional feed rollers Radio remote control for chipper and crane Trailer towing eye: 40 mm Brake: air pressure brake, Duomatic 2 additional feed rollers Radio remote control for chipper and crane The machine is in mint condition. Location: NRW Availability: by arrangement Warranty: The machine is sold in the condition it was in at the time of handover. The seller assumes no liability for defects We reserve the right to sell, make changes and repairs. This overview is only intended as a source of information and does not constitute a binding offer. We hope that we have aroused your interest. We look forward to hearing from you and are happy to answer any questions you may have. Nothing suitable? Then contact us! Kdjdeuitb Aopfx Afiju +++++ The BBT 400 Woodzilla is a 360° swivelling, compact, powerful, mobile drum chipper with aggressive feed, mounted on a lorry trailer chassis. Technical specifications Drive: Diesel, Deutz TCD 3.6, 100 KW (136 hp), Stage 5 Feed: 320 x 500mm Chipping drum: 400 x 500 mm, 4 knives Log diameter max.: 32 cm Length of infeed table: 1300 mm Support: 4-fold hydraulic Z-crane Ben-Tele 550 2 additional feed rollers Radio remote control for chipper and crane Trailer drawbar eye: 40 mm Brake: air pressure brake, Duomatic 2 additional feed rollers Radio remote control for chipper and crane The machine is in mint condition. Warranty: The machine will be sold in the condition existing at the time of delivery. The seller does not assume any liability for defects. A review is possible after prior arrangement!

Condition: used, Disc chipper for logs lumber slabs and off-cuts Ksdpfx Afsv Hxc Soisdu Capacity round wood, logs : 200 m3 ready made chips per hour Capacity sawmill waste : 100 m3 ready made chips per hour Infeed width : 500 mm Infeed height : 300 mm Knife dimension : 525x180x16 mm Weight 5400 kg

Year of construction: 2021, condition: reconditioned (used), Aluminum angled conveyor belt for shredder 2000mm flat + 2000mm incline Dim: approx. 3000 x 420 x 105mm Aluminum construction: Conveyor belt width with corrugated edge PVC- conveyor belt conveyor belt green, 2-ply especially crosswise stable endless welded with step connection * antistatic due to threads in the fabric of the running side Kdodpfoff Hgbex Afiou drive: motor approx. 0,55Kw, speed 0,3m/sec. * controllable with frequency converter connection 220/400V, 50Hz protection class IP54 drive, motor control optional

Condition: good (used), Spoerri 360 Chipper Model 360K Kdedpfswcdygox Afiju Engine power 37 kW

Year of construction: 2025, condition: new, functionality: fully functional, Professional drum dryer: SB-3000 OPTIMECH for sawdust, wood chips, peat, flax, hemp, grain, biomass, manure, corn, rapeseed, tobacco leaves, mint, herbs, copper granulate, aluminum, sand, fruit, vegetables, seeds, mushrooms, bread, etc. Complete device, ready to work. Dryers have been working for our customers for over 15 years without any problems. Machine adapted to almost any type of raw material. The raw material has absolutely no contact with exhaust fumes or fire. Drying takes place through a heat exchanger, using only hot air. No spontaneous combustion or burning of the raw material (we set the drying temperature). The dryer works best in closed rooms at an ambient temperature of at least +10°C. Efficiency: precipitation of approx. 10-15% humidity/hour; - drum rotation power supply: 1.1 kW (negligible power consumption due to the use of a large gear wheel); - hot air heater power supply: heating oil/diesel oil ON; - heating oil consumption: approx. 5 L/hour; - total electricity consumption: approx. 3 kW; - efficient Italian fans (2x 2500m3/h); Kjdpfov D D Axjx Afisdu - exhaust gases discharge only in one place; - mechanical steam extraction with cyclone; - rotary heat recovery (made entirely of stainless steel - acid-resistant); - safe and easy to use; - drum rotation: left/right; - control cabinet and all connections made by a qualified electronics engineer; - all spare parts available immediately, we are the manufacturer of the device; - possibility of modification according to the client's individual ideas; - at our disposal we have a complete machine park and a spacious production hall, which has been in the same place for 40 years, we do not cheat or mislead the client, we are always on the phone, we are here to help. Raw material input at a time: up to 1.5 m3. Thermal power: 40-100 kW. Drying temperature control (controller with temperature sensor). Reliable oil burner of the well-known brand: LAMBORGHINI. Possibility to buy the machine without the horizontal conveyor visible in the photos and recording.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, VECOPLAN 55/18/3 Mill Inlet width: 550 mm Kdjdpfx Afewiuywoiju Inlet height: 180 mm Main motor: 55 kW Number of lower drive axles: 2 Bottom drive motor: 3 kW Number of upper drive axles: 1 Upper drive motor: 3 kW Pneumatic guard opening Electrical panel Ready for operation Year of manufacture: 2000

Condition: good (used), Year of construction: 2006, Drum chipper, high-speed with horizontal infeed Kdsdpsu Rl Ruofx Afiju max. infeed width 450 mm max. infeed height 140 mm Motor 75 kw with frequency converter for variable speed no vibrating chute included

Year of construction: 2019, condition: new, Aluminum flat conveyor belt without substructure 3000mm flat Kdodpeff Hf Dsfx Afiou Dim: approx. 3000 x 500 x 105mm Aluminum construction: Conveyor belt width incl. corrugated edge 500mm conveyor belt green, 2-ply especially crosswise stable endless welded with step connection * antistatic due to threads in the fabric of the running side drive: motor approx. 0,25Kw, speed 0,3m/sec. * controllable with frequency converter connection 220/400V, 50Hz protection class IP54 drive, motor control optional

Condition: good (used), I will sell a Klockner chipper with a control cabinet - auto reverse - hydraulic movement of the loading hopper - very good condition - used chipper TECHNICAL DATA dimension of the loading hopper at the top length/width 1370x640mm dimension of the loading hopper at the bottom length/width 1000x640mm outlet for shredded wood 2x fi200mm working width of the rotor 640mm main engine 15kW number of knives 18pcs knife size 30x30mm sieve size 10mm Kdodowcdxiepfx Afieu hydraulic movement of the loading hopper + pump engine 1.3kW electric auto reverse + dimensions length/width/height 3500x1250x2100mm weight about 2500kg

Condition: good (used), Year of construction: 1994, Drum chipper, high-speed chipper with horizontal infeed max. infeed width 300 mm max. infeed height 85 mm Motor 18.5 kw frequency-controlled for variable speed without vibrating chute Kdsdpsu Rl Sfefx Afiou

Year of construction: 2023, condition: new, Complete solution for transporting bulk goods such as wood chips, wood pellets, shredded goods, granulate, etc. Kdodpfsk S Dw Eox Afiou Aluminum angled conveyor incl. substructure horizontal area 1.500mm(customizable) Rising range 3.000mm (customizable) Infinitely adjustable angle in the kink Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable ( to move) Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. We always have various systems of this type in stock. The delivery time for an individual system is currently around 3-4 weeks, depending on the production effort. Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator