Used Wolfcraft Drill Stand for sale (12,941)

Condition: excellent (used), Year of construction: 1996, general overhaul in 2005 Number of spindles: 2 Drilling capacity/spindle, steel: 1-6 mm Drilling depth: max. 350 mm Todpfx Asy Eykgscnsb Z-axis travel: 350 mm X-axis travel: 350 mm Drive power/spindle: - 100% duty cycle 3.7 kW - 50% duty cycle 5.5 kW Spindle speed: 3,000 - 27,000 1/min Spindle mounting: Ø 10 - 60 mm Coolant pressure: max. 150 bar Coolant flow: 48 l/min Coolant volume: 1,000 l Compact band filter High-pressure pump Accessories included: - 29 drilling sleeves - Drilling sleeve holder - Taper chucks - Tapers - Drill chucks Optional accessories - € 5,500 - 137 drills - List available in PDF

Condition: new, Year of construction: 2026, Threading unit OLED display LED lighting Continuous/normal drilling capacity (mm) - R1 27/32 mm - R2 25/30 mm Maximum threading capacity - R1 M34x3 - R2 M20x2,5 Spindle MK III Drilling depth (mm) 125 Overhang (mm) 300 Tedpfx Acett Af Rjnsb Column diameter (mm) 125 Usable table surface (W x D) (mm) 590 x 450 Speed display digital Drilling depth display digital Drilling depth stop with fine adjustment Table height adjustment with rack and pinion Spindle/table (mm) 150-700 Machine dimensions without control panel (mm) 610 x 900 x 1,980 mm Machine dimensions with control panel (mm) 670 x 1,100 x 2,140 mm Spindle speeds, stepless R1 (1-stage) 0-1000 rpm R2 (1-stage) 0-1600 rpm Feed by hand Weight (kg) 370 Optional drilling package 5 (€875.00 plus VAT) - Vise [felix] 2.0 150 - Tapered mandrel MK III/B18 - Reducing sleeve MK III/MK I - Reducing sleeve MK III/MK II - Quick-change drill chuck B18 3-16 mm (accuracy 0.17 mm) Delivery in Germany, including packaging, free to your door! NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2024, NEW Pillar Drilling Machine FLOTT SB 25 plus - Thread cutting device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Stepless speed control via central rotary knob - Thermal overload protection - Spindle stop - Drill guard with electrical protection - Continuous/normal drilling capacity (mm): 23/25 - Thread cutting capacity (dependent on pitch): M16x1 - Spindle: MK III - Drilling depth (mm): 115 - Overhang (mm): 260 - Usable work surface (W x L) (mm): 420 x 340 - Table height adjustment with rack and pinion - Spindle speeds, stepless (1/min): 20 – 2000 - Dimensions (mm): 430 x 715 x 1800 Further TECHNICAL DATA can be found in the product data sheet! OPTIONAL Drilling Package 4 (296593) - € 595.00 - Vise [felix] 2.0 120 - Quick-change drill chuck B18 3-16 mm (accuracy 0.17 mm) - Tapered mandrel B18/MK III - Reducing sleeve MK III/MK II - Reducing sleeve MK III/MK I 3 years warranty for single-shift operation Delivery: free to your door including packaging (Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! Tedpsf S Tfnefx Acneb ASK FOR A QUOTE!

Condition: good (used), Year of construction: 1987, machine/vehicle number: 5742, functionality: fully functional, - Drilling capacity in St 60, 30 mm - Short spindle MK 3 - Spindle stroke 120 mm - throat depth 293 mm - Table support 420 x 300 mm, 2 T-slots - Machined base plate 320 x 329 mm, 2 T-slots - Distance base plate - drill chuck 1000 mm - Feed via turnstile - Weight 220 kg - Spindle speed 160 - 2250 rpm - Operating voltage 380 V-50Hz - Infinitely variable speed adjustment by means of adjustment lever - Motor speed in 2 stages, 700/1435 rpm - Tapping device with direction of rotation changeover after reaching the end stops Tedpfxoq U Swgj Acnsb - Coolant system completely installed. - Coolant tank in machine base - Work light with LED - RÖHM drill chuck 1 - 16 mm - New precision machine vice (test winner)

Condition: excellent (used), Year of construction: 1986, machine/vehicle number: 00127634, functionality: fully functional, High-speed bench drill, Made in Germany - Clamping table: 290 x 225 mm - Travel: 150 mm with hand crank - Spindle fitting: Drill chuck included - Drilling capacity in steel Ø 1 - 6 mm - Throat depth: 180 mm - Speeds: 900 - 10,000 rpm, 8 steps - Column: diameter 75 mm - Spindle stroke: 60 mm, with fine stop - Voltage: 380 V - Dimensions: 640/330/H740 mm - Weight: 92 kg Todpfx Acjyx Dzpeneb

Condition: new, Year of construction: 2026, Cutting device Programmable drilling depth shut-off Drilling depth and speed display – digital Threading device M20 (dependent on pitch) Continuously variable speed from 125 – 4000 rpm in two stages, stage change via belt deflection. Todpfx Aod H Rgfjcnsb Drilling capacity 25/30 mm Spindle MK 3 Drilling depth 125 mm Overhang 280 mm Usable table surface (swiveling) 420 x 340 mm Feed 0-300 mm/min, continuously variable Table height adjustment with rack and pinion Machine dimensions (W x D x H) 520 x 820 x 1900 mm Motor, three-phase, 400 V, pole-changing, 0.9/1.45 kW Weight 300 kg OPTION: - Drilling kit 5 consisting of: taper arbor, drill chuck, vice, and T-slot set (€845) - Spindle stop and chip breaker module (€864) DELIVERY: free to your door including packaging NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: excellent (used), Year of construction: 2000, Table clamping surface: 600 x 300 mm Travel range: X 350 Y 250 mm Adjustment range W-axis (motorized): 200 mm Servo-controlled EDM axis Z: 340 mm Todpfsw Hyfyjx Acneb Drilling with electrodes from Ø 0.2 to 4 mm Max. workpiece weight: 300 kg Connected load: 3.5 kVA Machine weight: 700 kg

Condition: new, Year of construction: 2026, - Stepless speed control - Quickly adjustable drill depth stop - Thread cutting device - Undervoltage protection - Table height adjustment via rack and pinion - LED lighting in the head - Continuous/normal drilling capacity 20/23 mm - Thread cutting capacity max. M 12x1 - Spindle MK II - Drilling depth 100 mm - Overhang 260 mm - Column diameter 110 mm - Usable table surface (W x L) 420 x 340 mm - T-slot size (arm): Number 2, spacing 125 mm - Speed display: Digital - Drilling depth display: Digital - Quickly adjustable drill depth stop - Manual feed - Motor: Three-phase 400 V - Spindle speeds, stepless: 30 - 3,000 rpm Optional drilling package 3, consisting of: - Machine vise [felix] 2.0 100 mm - Quick-change drill chuck 3-16 mm (accuracy 0.17 mm) - Taper shank MK 2 B18 and reducing sleeve MK 2 to MK 1 € 485.00 Optional: Coolant system: € 620,- FACTORY WARRANTY: 3 years DELIVERY: Free to your doorstep, including packaging NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT DEALER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE! Tsdpfsd Nk S Isx Acneb

Condition: used, Year of construction: 1972, Technical details: bore capacity in steel (diameter): 25 mm throat: 300 mm Tsdpfxozfltdj Acnsb bore stroke: 630 mm spindle turning speed - continuous: 150 - 2860 U/min spindle taper MT: MK 4 Distance spindle/table max.: 630 mm table-size: 300 x 400 mm total power requirement: 1,65 kW weight of the machine ca.: 700 kg dimension machine approx.LxWxH: 0,6 x 0,8 x 2,10 m

Condition: used, Year of construction: 2011, Technical details: bore capacity in steel (diameter): 35 mm throat: 350 mm bore stroke: 180 mm threading: ST M 24 mm spindle taper MT: MK4 spindle speed:: 50 - 1450 U/min Tedpfxeyli Sfo Acneb Distance spindle/table max.: 780 mm table clamping surface:: 560 x 560 mm weight of the machine ca.: 500 kg dimension machine approx.LxWxH: 0,73 x 0,56 x 0,22 m · Heavy, solid cast construction · Automatic gear lubrication via oil pump · Smooth running due to ground gearbox gears operating in an oil bath · High concentricity thanks to hardened and ground main spindle · Thread cutting device · Lockable main switch and motor protection switch · Optidrill B 40GSM additionally with automatic quill feed · Electric · 2 feed rates: 0.1 / 0.2 mm/rev · Coolant system · Drilling depth stop · 18 speeds: 50 – 1,450 rpm · 9 selectable speeds via gearbox lever on the front of the drill head *

Condition: used, Year of construction: 1997, Technical details: bore capacity in steel (diameter): 32 mm x-travel: 750 mm y-travel: 520 mm drill capacity in cast iron: 45 mm revolution per minute: 90 - 4500 U/min feed steps: 6 bore spindle stroke: 250 mm boring spindle diameter: 30 mm drill spindle - Morse Taper: MK4 vertical adjustment of the arm: 520 mm throat max.: 1000 mm Todpfjzgwgfex Acnjb throat min.: 250 mm column diameter: 400 mm swivel range of the arm: 180 ° table clamping surface LxW: 1150 x 800 mm total power requirement: 3,5 KW weight of the machine ca.: 2000 kg dimension machine approx.LxWxH: 1,7 x 1,07 x 2,61 m The KOVOSVIT VO 32 is a robust and versatile radial drilling machine designed for industrial applications. The machine is suitable for drilling, boring, countersinking, reaming, and tapping operations in steel, cast iron, and other materials. Thanks to its swiveling radial arm and large reach, even large and heavy workpieces can be machined conveniently without the need for complex repositioning. The machine features a massive cast-iron construction, a powerful main drive, and an automatic feed system. The drilling head can be moved along the radial arm, providing a large working area. Its solid design ensures high precision, reliability, and a long service life, even under continuous operation. Equipment: ·Including coolant pump ·1 × boring tool block (boring cube) ·1 × machine vise *

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK DG32MD is a professional spiral drill sharpener designed for intensive operation in industrial and workshop environments. The machine enables precise sharpening of HSS and cobalt drills in the diameter range of ø5–ø32 mm, making it a highly versatile tool for production plants, tool rooms, and service facilities. Thanks to the use of a powerful motor, CBN grinding wheels, and an additional drill web thinning socket, the DG32MD model ensures not only high accuracy but also complete regeneration capability for cutting tools. Main advantages of the machine Wide drill diameter range: from ø5 to ø32 mm – ideal for sharpening both small and large cutting tools. Adjustable point angle: 90°–135°, allowing sharpening of most types of twist drills. Two clamping systems (ER20 and ER40): provide secure and rigid drill mounting across the entire diameter range. CBN (borazon) grinding wheels included: designed for sharpening high-speed steel drills, offering high durability and precision. Stable and compact construction: with a weight of 32 kg, it ensures accuracy and vibration-free operation. Complete equipment set: includes collets, holders, and tools – ready for operation without the need for additional purchases. Design and technology The CORMAK DG32MD has been designed for intensive use and long service life. The machine features a robust housing resistant to vibrations and a 250 W motor with a speed of 4400 rpm, ensuring smooth operation even when sharpening larger diameter drills. The quick-change ER20 and ER40 holder system allows easy switching between different diameter ranges, while the precise tool guidance eliminates the risk of operator errors. Tjdpfx Acevu Ac Eonsb Precision and work efficiency High-quality components ensure that the CORMAK DG32MD drill sharpener provides repeatable and precise sharpening results, even during continuous production work. Applications The CORMAK DG32MD model is suitable for: tool rooms and production plants where fast drill regeneration is required, repair workshops and maintenance departments, service centres, technical and training facilities requiring high sharpening accuracy and repeatability. Standard equipment 2 × CBN grinding wheels – for high-speed steel drills 12 × ER20 collets: ø5–ø14 mm 18 × ER40 collets: ø15–ø32 mm 1 × ER20 clamping holder 1 × ER40 clamping holder Technical specifications Parameter Value Drill diameter range ø5–32 mm Point angle 90°–135° Power 250 W / 230 V Motor speed 4400 rpm Weight approx. 32 kg Dimensions 400 × 260 × 300 mm

Condition: good (used), Drilling system / auger drill / 5-T-A / 4 T-A including coolant ring Drilling diameter, smaller drill: 48-65mm (overall length approx. 730mm) Drilling diameter, larger drill: 64-88mm (overall length approx. 755mm) Tedpfjzvmi Uox Acnob Mount: MK5 or SK50

Year of construction: 2014, condition: used, functionality: fully functional, We offer this used trade fair stand made of stainless steel, manufactured in 2014. Manufacturer: IMW - Wolfgang Müller Model: MesseStand Year of manufacture: 2014 Condition: used Machine type: Stainless steel trade fair stand Used trade fair stand, also suitable for use as a pavilion, sales stand, indoor stand, room divider, or sales counter. Tjdpfxjyvr I Sj Acneb As shown in the parts drawing, it includes transport boxes and lighting, but excludes furniture, side panels (banners), a TV, and inventory (available upon request). This trade fair stand has only been used three times. Stainless steel with component elements painted in RAL 9005 and blue acrylic glass panels, size 5 m x 4 m, height 3 m. The trade fair stand is disassembled into 4 high-quality wooden transport boxes, each measuring 3.50 x 1.20 x 1.20 m. If you have any questions or require further information, please send us a message or call us.

Condition: new, Year of construction: 2026, functionality: fully functional, number of drawers: 30, warranty duration: 12 months, Our company (EXPOGLASS®) manufactures machines, glass racks for the glass industry. Our offer includes a 321 x 255 pull-out glass rack. New product on request. Technical data : Number of drawers - 30 Size of panes - 2550 X 3210 for storage Load capacity of a single drawer - 1500 kg Loading space width - 80 mm Total storage width - 4460 mm Orientation (tilt side of drawers) - universal (depends on assembly) Number of positioning rollers per drawer - 8, bearing-mounted Construction - modular (combinable) Material of the front wheel of the drawer - floor friendly polyamide Rear wheel of drawer - steel - turned, bearing-mounted, with double flange, running on steel track Todpfx Aoh Uudvecnob We export our products all over the world.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 3,100 rpm, rotational speed (min.): 700 rpm, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, throat depth: 1,490 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, NEW | YEAR 2026 | CE CERTIFIED | MADE IN POLAND | EXW €38,000 + VAT WHY THE PRIAM The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable. The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops. The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass. BUILT FOR SERIAL PRODUCTION Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions. Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs). Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm). TECHNICAL DATA Drilling diameter range: Ø 5–80 mm (both drills same diameter) Glass thickness: 2–20 mm Max. pane size: 2,000 × 4,000 mm, up to 200 kg Todpoh Ek H Sofx Acneb Support bar travel: up to 1,060 mm below spindle axis Holes on the glass edge (half-moon): yes, position 0 Drilling program: up to 20 holes on the vertical axis Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration Feed: automatic, electronically controlled Cooling: closed water circuit, approx. 30 l Compressed air: 6 bar (pneumatic clamping) Power supply: 400 V / 16 A / 4 kW Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm Weight: 1,900 kg Scope of delivery: CE marking, documentation, operating manual MANUFACTURER, SERVICE, TERMS EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site. Delivery time: approx. 8 weeks. Warranty: 12 months. Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing. Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.

Year of construction: 1991, condition: ready for operation (used), Available immediately, ex works: Drill press, Metalac Type BR 32 Year of manufacture 1991 Spindle taper MK 3 Todpozwuhbofx Acneb Drilling capacity: 32 mm steel, 40 mm cast iron Automatic feed Table: 600 x 470 mm Drilling stroke: 180 mm Overhang: 280 mm 2 vices Coolant system Weight: 750 kg Price: EUR 1,250.00 plus VAT, ex works.

Year of construction: 2023, condition: used, Dimensions (LxBxH): 110 x 55 x 150 cm Serial number: SMK2023072160K-1 Power: 30W Working area: 110x110mm Overall dimensions LxWxH: 1100x550x1500mm Tjdpfxozm H Acs Acnob Online auction of metalworking and sheet metal processing machines (including a wide selection of SIEGMUND welding and clamping tables and related tools, SAFAN press brakes and SAFAN guillotine shears, MOSMAN YLS-3000 3kW laser welding machine, various FRONIUS, REHM, etc. welding machines, BOMAR, URSUS, ELHA, etc.), remaining stock of sheet metal, materials and inventory, rolling stock, technical equipment, and modern office furniture, released following the recent bankruptcy of Solex Thermal Science (Netherlands) B.V., formerly Mosman Stainless Steel in Haaksbergen, the Netherlands. The online auction opens Thursday 16 July and closes Thursday 3 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 1 September Pickup days are on: - Thursday 10 September - Friday 11 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Year of construction: 2014, Used Machine Year of manufacture: 2014 Condition: The machine has been factory-overhauled by Ganner Features and Technical Specifications: Complete standard configuration including: - Support with linear guide consisting of: 1 single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 blow-out, gluing, and dowel-driving station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1300 mm, travel speed max. 105 m/min. - Z-axis manually adjustable via mechanical digital counter, position adjustable via support table 5–40 mm - Dowel drive-in overhang adjustable from 7–20 mm via a mechanical digital counter; drilling depth from 0–35 mm (for drill bit length GL 70 mm) is automatically adjusted with the drive-in overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GLUE/WATER selector switch for flushing the glue system, each with: 1 stainless steel tank for 7.5 kg of glue and 7.5 l of water - Indicator light showing remaining glue levels in the glue tank - 1 left side stop, 1 right side stop, and 1 center stop (all removable) - 4 start buttons for individual processing of 1–4 workpieces - 4 pneumatic 10° angle clamping cylinders for workpiece thicknesses up to 80 mm, workpiece length (Y) min. 70 mm - 1 extraction funnel, connection Ø 80 mm - 1 TCT control unit with: Built-in industrial PC, including Beckhoff TWINCAT soft PLC, operating temperature range 0–50°C, 15-inch capacitive TFT industrial touchscreen, operating system: WINDOWS 7 - Programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensions, automatic workpiece mirroring and operation optimization, 4 work areas assignable to different programs, graphical workpiece display, parametric programming, zero-point offset, programmable worklists, error diagnosis with plain text Optional equipment: Tsdszlbrvjpfx Acnjb - 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 1 Z-axis with NC-controlled, dynamic positioning for height adjustment of the drilling and dowel-driving station (programmable from 5–40 mm), travel speed max. 30 mm/sec. - 1 single-spindle vertical drilling unit drilling from the TOP, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via a mechanical digital counter from 5–40 mm, drilling depth (Z) max. 30 mm (with drill bit length GL 57 mm), Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (including drilling depth compensation, e.g., for Häfele Minifix) - 4 vertical 10° angle clamping cylinders with mount - 1 keypad with mount Availability: available shortly Location: DE-63934 Röllbach

Condition: new, 6-sided drilling machine Manufacturer: Quick Type: KQ-63E New machine Technical data: - Workpiece length: 70 - 2800 mm - Workpiece width: 50 - 1220 mm - Workpiece thickness: 9 - 60 mm - Min. workpiece to be processed: 70 x 50 mm - Feed rate in X: 135 m/min - Feed rate in Y: 90 m/min - Feed rate in Z: 25 m/min - Individually controllable spindles: Top: 2 x 12 vertical, 4 horizontal / Bottom: 1 x 7 vertical - Machine control: Higerman (German) - Milling spindle (top): 9 kW, 24000 rpm - Tool changer (top): 5-position - Milling spindle (bottom): 3.5 kW, 18000 rpm - Motors: Brushless servo motors - Positioning accuracy: 0.03/1000 - Repeatability: 0.02/1000 Optional: - Machine with workpiece return Quickly found Offer machines Register for newsletter Unsubscribe from newsletter Contact us Overview Tjdszvgn Dspfx Acnob

Condition: new, Six-sided drilling machine Manufacturer: Quick Type: KQ-62Lite New machine Technical data: - Workpiece length: 70 - 2,400 mm - Workpiece thickness: 9 - 60 mm - Workpiece width: 30 - 1,220 mm - Min. processing size: 50 x 70 mm - Transport speed in X: 138 m/min - Transport speed in Y: 90 m/min - Transport speed in Z: 28 m/min - Machine control: Higerman - Working height: 890 mm - Milling spindle: 2 x 3.5 kW, 18,000 RPM, manual tool change - Drilling unit: Top 9 vertical and 4 horizontal / Bottom 7 vertical - Positioning accuracy: 0.03/1000 - Repeatability: 0.02/1000 - Power consumption: 25.8 kW Optional - Machine including workpiece return Todpfxozvgnds Acnob Other configurations available upon request.

Condition: good (used), *FOR SALE: Cincinnati Milacron PTC 40 Column Drill – 1982* *Price:* €2,200 – Negotiable *Location:* Les Ponts-de-Cé, 49130, Pays de la Loire *Description:* Industrial column drill *CINCINNATI MILACRON PTC 40*, manufactured in 1982. French made. Very robust machine for drilling and tapping in mechanical and sheet metal workshops. Column with cross table mounted on slides. Remote control + foot pedal. Complete and fully operational machine. *Specifications:* - *Make / Model*: CINCINNATI MILACRON PTC 40 380V - *Year*: 1982 - Serial No. 45117 - *Type*: Column drill on a base - *Table*: Cross table mounted on slides - *Feed*: Spindle descent via handwheel + lever - *Equipment*: Remote electrical cabinet, Foot pedal, Vises - *Mounting*: On a pallet for removal Tjdpfjzvgr Ajx Acnob

Condition: good (used), Year of construction: 2007, *Description:* Industrial column drill press *CINCINNATI CA NC320V*, year 2007. Made in France. High-end machine for precision drilling in a mechanical workshop. Column-mounted spindle with mechanical speed variation in 2 ranges. Cross table + vise included. Complete machine, available for inspection. *Specifications:* - *Make / Model*: CINCINNATI CA NC 320V 380 - *Year*: 2007 - Serial number 320838 - *Speeds*: 2-range variable speed: 80-625 rpm and 385-3000 rpm - *Spindle*: CM3 or CM4 taper, to be confirmed - *Table*: Cross table + vise, as shown in the photo - *Column*: Column with rack and pinion for motorized up/down movement Tjdpjzvgn Rjfx Acnsb - *Equipment*: Emergency stop, speed chart *Condition*: Very good condition. Recent and robust machine. On a pallet for removal. Testing possible on site. Removal by carrier.

Condition: excellent (used), Year of construction: 1994, tool diameter: 60 mm, spindle mount: MK 5, rotational speed (max.): 1,460 rpm, total width: 1,100 mm, total length: 2,300 mm, total height: 2,400 mm, table width: 580 mm, table length: 1,400 mm, overall weight: 2,700 kg, Arm Length: 1200mm Max. drill Ø cast: 60mm Max. tap Ø: 40M Max. drill Ø steel: 50mm Stroke pinole: 110mm Max. distance spindle - table:1165mm Min. distance spindle - table:300mm Todpfx Aozvfn Nscneb Floor / table area: 1400 x 580mm Speeds / ranges: 1460Rpm Spindle Taper: 5ISO/Bt/Mk Length: 2300mm Width: 1100mm Height: 2400mm Weight: 2700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2023, machine/vehicle number: 320542/B, functionality: fully functional, number of axes: 3, controller manufacturer: TPA, CNC Drilling and Milling Machine Manufacturer: Vitap Type: K3 New machine Through-feed processing, workpiece machining from below, and automatic workpiece return to the operator Develop an individual class: - With this machine, you can perform many different milling operations in addition to grooving and drilling, from simple edge milling to milling shapes and letters. - We do not limit your creativity. Easy entry into CNC technology: - TPA makes it easy for you: Whether drilling, grooving, linear milling, contour milling, or milling letters. - The CAD software clearly displays the machining operations. - Particularly clear is the programming of the work steps on the individual workpiece sides. - You can mirror machining operations with a mouse click. - You can either enter the starting points precisely or determine them by clicking on the virtual workpiece. Vitap Bar Nesting - efficient and time-saving - This patented software produces entire corpus elements from a long workpiece. - You insert the long workpiece, and when you remove the first finished element, the machining of the next element continues directly. The DDT feed system (double dynamic transport) - 2 clamps enable uninterrupted workpiece transport. - The operator inserts the workpiece until it reaches the stop. - Both clamps then grip the workpiece and position it precisely. - During machining, both clamps communicate with each other, so that clamp 2 grips before clamp 1 releases. - This ensures a constant feed rate even during linear milling. 3 controlled axes: - X axis - DDT feed - Y axis - Drilling head travel - Z axis - Drilling - Double "0" reference: New laser generation for detecting the beginning and end of the workpiece. The program can readjust the drilling from below to achieve perfect alignment in vertical and horizontal workpieces. The laser consists of a transmitter and receiver to avoid errors with dark edge material. - Side stops with rollers, consisting of a fixed and a movable part, mechanical digital readout with automatic alignment to the 0 stop for removal of up to 3 mm on the 0 line - Constant side pressing device for precise positioning to the 0 line - Automatic 4-position tool changer - Adjustable zero point - No workpiece length limitation - Monitor LCD TFT 20" - Industrial PC - Operator interface WSC with Lister, parametric tool, and parametric setup - Graphical programming CAD TPA EDI32, basic version - USB port - Storage of all files - Macro programming - Import DXF files Technical data - Number of independent, vertical spindles: 12 - Number of independent, horizontal spindles on the X axis: (2+2) - Number of horizontal drilling spindles on the Y axis: (2+2) - 1 saw (100mm) - Electro spindle 5 kW with ISO30 taper (RPM [contact removed]) - Max. workpiece weight: 40 kg - Max. workpiece dimensions: X unlimited, Y 1250 mm, Z 50 mm - Min. workpiece dimensions: X 270, Y 150 (70op), Z 3 mm - Feed rate: 25 m/min - Spindle speed: 3600 RPM - Saw speed: 7000 RPM - Max. horizontal tool: 12mm - Max. drilling depth horizontally on the X and Y axis: 35mm - Max. drilling depth vertically: 43 mm - Max. vertical tool: 35mm - Motor: 1.7 kW - Adjustable zero point for 4-sided formatting Todpszvduujfx Acnjb - CE compliant Optional against additional charge