Used Wire Cut for sale (19,294)

Condition: like new (used), Year of construction: 2017, load capacity: 1,200 kg, lifting height: 7,950 mm, construction height: 3,400 mm, operating hours: 3,590 h, fuel type: electric, mast type: triplex, Manufacturer + model:LINDE V ( 5213 ) Mast:3F7950 Bwodpfoxrp Dasx Acyjw ID:25013.1087 Cat.:Used Mast:3F Lowered height:3400 mm Lifting height:7950 mm Capacity:1200 kg Platform height:7400 mm Picking height:9000 mm Init.:Yes Cabin width:1300 mm Year:2017 Hours:3590 hours Capacity:48 v / 620 ah Options:FULL options !!- Mast Triplex - FFL - DOUBLE steering !!!! - SAFETY doors with NEIG FUNCTION ! - Adjustable Spoons ! - 2 x Bleu spot - Induction / Wire Guidance - End of line sensor under batteryComplete LIKE NEW !!!

Condition: used, Year of construction: 2007, HOLZ-HER – 6310 CUT 110 580 Computer-controlled Panel Saw Watch the video of the machine: Year of manufacture: 2007 Machine number: 136 The machine has been overhauled in all essential mechanical components. New PC, new label printer, etc. in 2023 Technical Specifications and Description: Base machine: Pressure beam saw Version: Fence on the right Saw cycle: away from the fence Cutting length: 5,850 mm Cutting width: 5,850 mm Saw Blades: Main saw blade Ø 400 x 4.4 x 30 mm, Z72, FZ/TZ (not included!) Tungsten carbide pre-scoring blade Ø 180 x 4.4/5.4 x 30 mm, conical (not included!) Cutting Height Cutting height: 110 mm Saw blade projection: 120 mm Pressure beam: pneumatic, pressure adjustable Extraction: Bjdpsw I Uxpsfx Acyoww Central moving dust channel on the unit Extraction port base machine: 1x Ø 160 mm, positioned on the right side Dust channel in pressure beam: 2x Ø 120 mm – 1x top left, 1x top right with cutting length 5,850 mm: 3x Ø 120 mm – 1x top left, 1x top center, 1x top right Extraction air velocity: 30 m/s Air volume: 4,000 m³/h at 30 m/s Compressed Air Air consumption approx. 32 l/min at 6 bar per cutting cycle Switchable collet chuck pressure Switchable from the control panel For sensitive panel materials Automatic cutting length limitation The saw unit detects the workpiece end using a non-contact sensor and optimizes the cutting cycle Offcut device For cutting without leftover piece Clamps retract into recessed pressure beam Width Stop Precision-guided, freely programmable width stop with clamps Rack-and-pinion drive for precise positioning With surface-hardened linear guides Return speed of panel pusher: 80 m/min Forward speed of panel pusher: 80 m/min (EU – max. permissible forward speed 25 m/min) Max. opening for clamps: 120 mm for longitudinal and cross cuts Clamps, floating design Compensate for internal stress in panel packs upwards – 6 pcs for 3,250 mm cutting length – 7 pcs for 4,250 mm cutting length – 8 pcs for 5,850 mm cutting length Control CUTCONTROL 2 with 15" TFT display Operating system Windows 2000 RJ45 network connection 10/100 Base-T Fast Ethernet Intel Celeron processor Midi tower US keyboard Optical mouse CD ROM drive Control panel located on fence side Clearly arranged graphic-based operator interface for easy handling and order/material management on Windows basis Realtime display Large, clearly structured buttons All functions accessible from one level No limits in input fields and unlimited job inputs possible Control Functions Direct Cut: Cutting by direct entry of cutting dimensions. Processing of absolute, serial, or format cuts, with integrated grooving, notching, or positioning cuts. Unlimited jobs programmable. Job prioritization (prioritization possible at any time). Order programming parallel to cutting. NC Cut: Processing of optimized jobs. Graphical machine overview with machine process flow function ...

Year of construction: 2008, condition: ready for operation (used), General Data Measurements width 1900 mm Measurements depth 1800 mm Bwjdexpyvhepfx Acyjw Measurements height 2200 mm Movement X-Axis Movement 550 Y-Axis Movement 400 Z-Axis Movement 350 This 5-axis AgieCharmilles Spirit 3 was manufactured in 2008. It features an integrated C-axis and electrode magazine, multitasking operating system with object-oriented graphical interface (AEP Spirit), and a table size of 850×650 mm. Movement range includes X:550, Y:400, Z:350. Consider the opportunity to buy this AgieCharmilles Spirit 3 wire EDM machine. Contact us for more information about this machine. Application Types EDM

Condition: excellent (used), Year of construction: 2017, operating hours: 13,284 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, oil tank capacity: 2,600 l, Technical data baler: Manufacturer Bollegraaf Type HBC 140 Year of construction 2017 Working hours 13,284, as of October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm (l x w) Capacity per cycle time 4,34 cbm Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm (w x h), length adjustable Driving motor 2 x 75 kW Connected load 209 kW Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 850 up to 1.500 kg Hydraulicoil 2.600 l Univis N46 Baler dimensions with conveyor built up with hopper approx.13,200 x 24,200 x 7,333 mm (l x w x h) Transport dimensions only baler approx.13,200 x 2,884 x 3,539 mm (l x w x h) Machine weight baler approx. 51,810 tons Technical data feeding and elevating conveyor with gooseneck: Manufacturer Bollegraaf Typ HBT 1216/1800 * 23,300 30°/15° Year of construction 2017 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Bwsdpfxoxpxhvj Acysw Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Transport dimensions feeding conveyor with one segment elevating part 9,816 x 2,500 x 2,242 mm (l x w x h) Transport dimensions elevating conveyor with goose neck 13,472 x 2,800 (without motor) x 2,729 mm (l x w x h) Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Condition: The press is in very good condition and ready for immediate operation. The conveyor belt chain needs replacing. The system will be in operation until December 2025. Scope of delivery: baler with conveyor belt, maintenance platform, access ladder, two wire feed stations for 5 wire reels each (without wire), and bale slider. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2004, Technical details: table length: 920 mm table width: 600 mm ampere: 13,2 A weight of the machine ca.: 6 t dimensions of the machine ca.: 2,46 x 2,24 x 2,33 m X-axis: 600 mm y-axis: 400 mm Z-axis: 260 mm max. table load: 1500 kg The dimensions for transport are: wide 2240 mm x high 2330 mm x deep 2460 mm weight approx. 6000 kg. Bedpfsuzbayjx Acyjww *

Condition: excellent (used), functionality: fully functional, We are offering a used System 3R-217-1 Marco Block here. The chuck is in very good condition and fully functional. Viewing by appointment possible. Shipping and viewing available! Bodpfx Acexphvcoyoww

Condition: like new (used), Year of construction: 2017, operating hours: 4,764 h, load capacity: 1,250 kg, lifting height: 6,000 mm, fuel type: electric, mast type: triplex, construction height: 2,830 mm, Manufacturer + model:JUNGHEINRICH EFX 413X + i - 100 - 3F6000 ( = 600 DZ ) ID:24096.5461 Cat.:Used Mast:3F6000 Forks:1000 mm Lowered height:2830 mm Lifting height:6000 mm Capacity:1250 kg Bsdjxrpy Ispfx Acyjww Year:2017 Hours:4764 hours Capacity:48 v / 750 ah Options:TYPE ; EFX 413 X + i 100 - 600 DZ- VNA truck - Wire Guidance

Condition: used, Year of construction: 2019, Wire EDM machine Manufacturer: Mitsubishi Electric Model: MV1200S NewGen Year of manufacture: 2019 Operating hours: approx. 9,500 Bedpfx Acjxpfy Sjyjww Control: M800 D-CUBES Mitsubishi Electric control Hybrid design Travel ranges: X/Y/Z: 400 x 300 x 220 mm Travel ranges U/V: 120 x 120 mm Max. workpiece dimensions: 810 x 700 x 215 mm Max. workpiece weight: 500 kg ODS - Optical Drive System Tubular direct drives in XY axes Linear scales in XY axes Intelligent AT – Automatic wire threading For wire diameters 0.10 – 0.3 mm Automatic fine hole detection function 5 controlled axes – prepared for additional axes PFC – Precise Finish Circuit LLS – Long Life System 10 kg wire station Wire alignment block Wire chopper Compressor cooler ä31125

Year of construction: 2013, condition: ready for operation (used), General Data Measurements width 2720 mm Measurements depth 2520 mm Measurements height 2290 mm Machine weight 4400 kg Main Drive Number of axis 5 Movement X-Axis Movement 650 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm V-Axis Movement 160 mm Bodsxn Uyxopfx Acysww U-Axis Movement 160 mm Workpiece Workpiece weight 800 kg This 5-axis EXCETEK V 650 G was manufactured in 2013. It's a wire EDM machine capable of handling workpieces up to 1000 × 700 × 345 mm and 800 kg. Features include X, Y, Z travels of 650 mm, 400 mm, and 400 mm respectively, plus U/V-axis travel of 160 × 160 mm. It boasts a solid cast-iron construction and a stainless steel worktable for enhanced durability and precision. Contact us for more information about this machine. Application Types EDM

Condition: like new (used), Year of construction: 2012, Description of Ficep RAPID HP35T Ficep RAPID HP 35 T Angle Processing Machine The Ficep HP35T is the predecessor of the current Ficep RAPID series for processing angle steel. The Ficep HP35T is a CNC-controlled system for machining angle profiles. These are robust angle processing centers commonly used in steel fabrication and truss construction. The angle steel is positioned on a transport frame for material feeding. A measuring carriage with a gripper automatically conveys the angle material to the various processing stations of the system, following the machining data entered via the CNC control panel. Once machining is complete, the finished component—drilled, marked, and sawn—is transferred to the outfeed roller conveyor and storage system. Transport System Reinforced roller conveyor for profiles up to 12 meters in length. A powered measuring carriage on the infeed table transports the material at up to 45 m/min. A rotating support system with cross-transfer racks in the loading area allows for the input of pre-staged profiles into the waiting position. In the discharge area, a driven roller conveyor transports the finished profiles/angles up to a length of 12 meters. Cross-transfer equipment with 5 supports is used for unloading. Drilling Units with Tool Changer To process large angle profiles up to 350 mm with a wall thickness of 40 mm, this machine is equipped with 2 powerful drilling units (one per flange) featuring a spindle drive of 19 kW and infinitely adjustable spindle speeds from 180 - 3500 rpm. These drilling capabilities are ideal for the use of modern carbide drill tools. The drilling tools are held in HSK-A80 holders, and each drilling unit has a tool changer with 3 tool positions for rapid tool changes. MKT38N Marking Unit A marking unit with 38 marking tools allows for flange marking on angle profiles. Bwodpfexn T Smox Acyjw Characters sized 16x8 mm are hydraulically embossed, enabling part identification after galvanization. Precision Circular Saw The powerful circular saw is designed for 90° cuts. A vertical clamping system secures the material during fast sawing. Material dimensions range from 60 x 60 x 6 mm to 350 x 350 x 40 mm. The 18 kW saw motor with a 560 mm circular saw blade delivers very high cutting performance. Sawing speed is 80 - 180 m/min. Technical Specifications Ficep HP35T: Angle dimensions min. 60x60x6 mm to 350x350x40 mm Circular saw blade diameter 560 mm Saw motor 18 kW Cutting speed 80 - 180 m/min Max. drill diameter 40 mm Drill spindle drive: 19 kW Spindle speed 180 - 3500 rpm Feed rate 80 - 300 mm/min

Condition: not inspected (used), for fast, exact cross-cutting of several timbers at the same time, which can be placed next to and/or on top of each other, max. travel approx. 3.3 m, total table length approx. 4.15 m, total table width approx. 0.85 m, max. clamping height approx. 160 mm, max. timber width approx. 220 mm, positioning drive with 2 electric disc brakes, positioning slide can be swivelled upwards, with 2 pneumatic clamping tongs with 4 spring-loaded clamping fingers each from above, 10 clamping tines from below, for self-assembly on a cross-cut saw Bwjdpfx Acoiqn D Doyjw

Condition: excellent (used), Year of construction: 2003, Machine with water tank and automatic wire threader, cooling unit and software. XYZ axes 500 x 300 x 210 mm, taper +/- 15° at 100 mm height. Accessories: Dongel & laptop, various spare parts (nozzles, filters etc.) Bodpfou Thd Hjx Acyeww

Condition: like new (used), Year of construction: 2017, operating hours: 4,602 h, load capacity: 1,250 kg, lifting height: 6,000 mm, fuel type: electric, mast type: triplex, construction height: 2,830 mm, Manufacturer + model:JUNGHEINRICH EFX 413 X + i - 100 - 3F6000 ( = 600 DZ ) ID:24096.5462 Cat.:Used Mast:3F6000 Forks:1000 mm Lowered height:2830 mm Lifting height:6000 mm Capacity:1250 kg Year:2017 Hours:4602 hours Capacity:48 v / 750 ah Options:TYPE ; EFX 413 X + i 100 - 600 DZ- VNA truck Bedpfoxrpyuox Acyeww - Wire Guidance

Condition: good (used), Code: 0228 Brand: OMS SALVARANI Model: 300 INVINCIBILE Pneumatic double croscutting machine for cutting wood, frames, fixtures, joinery, furniture, and various other materials Bwedpfx Acjxnxumoyjw Technical data: Working length mm 3000 Blade diameter mm 300 Motor power Hp 2,5 - Rpm 3000 Manual movement of the 2 heads Cutting from 0 to 45° right and left Pneumatic pedal for lowering the heads N° 2 pneumatic clamps for locking workpieces N° 2 suction ports diameter mm 50 Compressed air 6 bar Overall dimensions mm 4000 x 700 x 1250 h Weight kg 520

Condition: good (used), Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer, cutting knife, knife set, bacon cutter, gate, cutting gate -Manufacturer:CFS Convenience Food Systems,Cutting knife set for cut knife 300/400 -Type: .: 39441 1 set = 4 pieces -Quantity: 6 sets available Bwsdpfxewy Uqke Acysw -Price: Per set -Dimensions Bos: 135/70/H55 mm -Weight: 1.2 kg

Condition: new, Year of construction: 2025, Crosscut and Mitre Circular Saws Type ZS 200NF Crosscut and mitre circular saw with a maximum cutting height of 200 mm Bjdsw Hl Aqepfx Acyoww Robust grey cast iron construction Precise ball bushing guidance of the tool carriage on hardened and ground steel shafts Manual saw feed Quick mitre adjustment up to 65° horizontally and 60° vertically Adjustable fixed stops Lower saw blade guard connectable to extraction system Machine mounted on mobile machine base with 1.5 m long roller conveyors on both sides (left and right) Left side equipped with scale and stop slider Technical Data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°- 90°- 25° Mitre range vertical 60°- 90°- 30° Saw blade Ø 520 mm (not included as standard) Extraction port 100 mm Weight 490 kg Location: In stock at 54634 Bitburg - Immediately available - On request, we are happy to offer the saw blade as well.

Condition: excellent (used), functionality: fully functional, AUTOMATIC CUTTING , BORING and MOULDING machine model PADE 1000N second hand machine . used very little , like new Machine suitable for assembling part of chairs, tables, frames, furniture, wheelchair frames, etc. The PADE 1000 N performs the operations of Cutting , Milling and Drilling at the end of the piece, either singularly or differently combined composed by 3 working units : A.Cutting unit circular saw max.diam. mm.400 motor power Hp 3 B.Boring unit boring head with 7 mandrins motor power Hp 3 max. working stroke of boring unit mm. 70 C.Moulding unit . with automatic movement Bodpodvdhmsfx Acyjww vertical spindle moulder motor with automatic anti-chipping retraction motor power Hp 5.5 milling spindle shaft diam.mm.30 automatic sliding carriage

Condition: like new (used), Year of construction: 2017, load capacity: 1,200 kg, lifting height: 8,300 mm, construction height: 4,650 mm, operating hours: 4,394 h, fuel type: electric, mast type: duplex, Manufacturer + model:JUNGHEINRICH EKS 312 Mast:Z + i - 2W8300 ID:24073.7549 Cat.:Used Mast:2W Lowered height:4650 mm Lifting height:8300 mm Capacity:1200 kg Platform height:7500 mm Picking height:9100 mm Init.:Yes Cabin width ; 1200 mm Year:2017 Hours:4394 hours Capacity:48 v / 620 ah Options: - PSA ( Sick ) Bedpfxexrpx Ds Acyjww - Induction / Wire Guidancecomplete LIKE NEW !!!

Condition: like new (used), Year of construction: 2012, operating hours: 2,706 h, load capacity: 1,250 kg, lifting height: 6,250 mm, fuel type: electric, mast type: triplex, construction height: 2,920 mm, Manufacturer + model:JUNGHEINRICH EFX 413 X + i - 100 - 3F6250 ( = 625 DZ ) ID:24064.5762 Bwjdpfexrpxdjx Acyew Cat.:Used Mast:3F6250 Forks:1000 mm Lowered height:2920 mm Lifting height:6250 mm Capacity:1250 kg Platform height:2706 mm Year:2012 Capacity:48 v / 620 ah Options: TYPE ; EFX 413 X + i 100 - 625 DZ- VNA truck - Wire Guidance

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 10,500 mm, construction height: 4,730 mm, operating hours: 1,844 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 308 Mast: L + i - 3F10500 ID: 24033.5995 Category: Used Mast: 3F Lowered height: 4730 mm Lifting height: 10500 mm Capacity: 1000 kg Platform height: 10500 mm Picking height: 12100 mm Bwodpfexrpwasx Acyew Cabin width: 1500 mm Year: 2018 Operating hours: 1844 hours Battery capacity: 48 V / 620 Ah Options: - Triplex mast – full free lift (FFL) - PSA (Sick) - Induction / wire guidance Condition: LIKE NEW

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 10,500 mm, construction height: 4,730 mm, operating hours: 1,201 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 308 Mast: L + i - 3F10500 ID: 24033.5993 Category: Demo Mast: 3F Lowered height: 4730 mm Lifting height: 10500 mm Capacity: 1000 kg Platform height: 10500 mm Picking height: 12100 mm Cabin width: 1500 mm Year: 2018 Operating hours: 1201 h Battery capacity: 48 V / 620 Ah Bwedpoxrpv Aefx Acyew Options: - Triplex mast – FFL - PSA (Sick) - Induction / wire guidance Machine LIKE NEW

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 10,500 mm, construction height: 4,730 mm, operating hours: 1,629 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 308 Bwodpfx Acjxrpuleyew Mast: L + i - 3F10500 ID:23123.5000 Category: Used Mast: 3F Lowered height: 4730 mm Lifting height: 10500 mm Capacity: 1000 kg Platform height: 10500 mm Picking height: 12100 mm Cabin width: 1500 mm Year: 2018 Hours: 1629 hours Battery capacity: 48 V / 620 Ah Options: - Triplex mast – FFL - PSA (Sick) - Inductive / wire guidance CONDITION: LIKE NEW!

Condition: like new (used), Year of construction: 2015, load capacity: 1,200 kg, lifting height: 9,450 mm, construction height: 3,900 mm, operating hours: 5,075 h, fuel type: electric, mast type: triplex, Manufacturer + model: LINDE V (5213) Mast: 3F9450 ID: 23106.0175 Category: Used Mast: 3F Lowered height: 3900 mm Lifting height: 9450 mm Capacity: 1200 kg Platform height: 8900 mm Picking height: 10500 mm Initial lift: Yes Cabin width: 1200 mm Year: 2015 Hours: 5075 h Bodpfxexrpt Uo Acyeww Battery capacity: 48V / 620Ah – Year 2021 Options: FULLY equipped!! – Triplex mast – FFL – SAFETY doors with TILT FUNCTION!! – Adjustable forks! – PSA (Sick) – Induction / Wire Guidance – End position sensors on mast Condition: LIKE NEW!!!

Condition: like new (used), Year of construction: 2015, load capacity: 1,200 kg, lifting height: 9,450 mm, construction height: 3,900 mm, operating hours: 4,059 h, fuel type: electric, mast type: triplex, Manufacturer + model: LINDE V (5213) Mast: 3F9450 ID: 23106.0180 Category: Used Mast: 3F Lowered height: 3900 mm Lifting height: 9450 mm Capacity: 1200 kg Platform height: 8900 mm Picking height: 10500 mm Initial lift: Yes Cabin width: 1200 mm Year: 2015 Hours: 4059 hours Bjdpfx Asxrpt Iscyjww Battery: 48 V / 620 Ah - Year 2021 Options: FULL options!! - Triplex mast - FFL - Safety doors with tilt function!! - Adjustable forks! - PSA (Sick) - Induction / wire guidance - End position sensors on the mast Machine LIKE NEW!

Condition: like new (used), Year of construction: 2015, load capacity: 1,200 kg, lifting height: 9,450 mm, construction height: 3,900 mm, operating hours: 3,483 h, fuel type: electric, mast type: triplex, Manufacturer + model: LINDE V (5213) Mast: 3F9450 ID: 23106.016 Category: Used Mast: 3F Lowered height: 3900 mm Lifting height: 9450 mm Capacity: 1200 kg Picking height: 10500 mm Initial lift: Yes Cabin width: 1200 mm Year: 2015 Operating hours: 3483 hours Battery capacity: 48 V / 620 Ah - Year 2021 Options: FULLY equipped!! - Triplex mast - FFL - SAFETY doors with TILT FUNCTION!! - Adjustable forks! - PSA ( Sick ) Bjdpfx Ajxrptzjcyeww - Induction / wire guidance - End position sensors on mast Complete LIKE NEW!!!