Used Wheel Wash System for sale (46,683)

Condition: new, Year of construction: 2026, FABO Bucket wheel washers are intended to maximize the support of various terms throughout the process, such as the maximum recovery of fines or maximum remove of fines with lower power capacity. Sand and water compound is supplied into the washing tank of bucket wheels and the sand is obtained and dewatered by impellers after washing. The dirty water enters the spiral tank for fine sand pressing, then the pressed fine sand is shifted into the bucket wheel tank by the gradually rotating spiral blade, the fine sand is carried out by the buckets, dewatered and discharged. Bsdpfx Aewbql Heafslc

Year of construction: 2026, condition: as good as new (ex-display), AVAILABLE IMMEDIATELY!!!! Manual cleaning is carried out using special gloves in the front section. Bjdpjf A D Nmsfx Aafslc The effectiveness of the cleaning is ensured by a high-pressure pump and a special spray nozzle. A temperature of up to 60 °C can be set for the cleaning fluid in these devices. The pressure can be set from 1- 80 bar. Technical data: Work surface: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg Optional up to 150 kg Spray pressure: 1-80 bar adjustable Tank volume: 75 liters / heating capacity 2kW Basic version: - Blow-off gun in the interior - Frame, feet, cover and housing made of stainless steel - Removable stainless steel plates above the tank - Flap can be opened upwards with 2 handles and gloves - Tempered glass window - Door opening/closing system supported by gas struts - Door opening monitored by safety limit switch - Filter on the suction side of the pump (500 micron) - Foot switch for operating the cleaning pump - Interior lighting - Neoprene gloves L 600mm (chemical resistant)- Adjustable feet +/- 50 mm Optional: - Stainless steel cartridge filter with pump (10/25/50 micron) - External mini-pneumatic oil separator

Condition: good (used), Suitable, for example, for machines from Emmegi, Elumatec, Pressta-Eisele, Mecal, Fom, etc. Measuring system with digital display and convenient adjustment via hand wheel Measuring length 3600 mm Blsdpfx Aasxy Hb Ssfjc mounted on roller conveyor with plastic rollers Support width approx. 290 mm ideal for mounting on existing saw used, in good condition

Condition: used, This listing is for a Ortho Diagnostic Systems Cellwasher 2 Bedpfx Aajxzhc Hefelc Ortho Diagnostic Systems Cellwasher 2 for automated red blood cell washing and separation in immunohematology laboratories.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Available immediately! Function Easy operation thanks to a fully automatic cleaning process, allowing professionals to focus on other important tasks. The wash tank is filled with a mixture of water and water-soluble IBS special cleaner (washing solution). The contaminated items are placed in the rotating washing basket, and the lid is closed. After setting the desired washing temperature and time, the unit is switched on and the solution in the tank is heated. Inside the closed unit, the basket rotates at a constant speed around its own axis. The pump units draw the washing solution from the tank and distribute it through 6 stainless steel jet pipes with overlapping flat spray nozzles. The items are intensively sprayed from all sides with the hot solution due to the uniform rotation of the motor-driven basket. Once the cleaning process is complete, the unit shuts off automatically. Advantages - 2 horizontally mounted pumps - 6 three-dimensional stainless steel jet pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (Ø 170 mm) - Rotating stainless steel wash basket, V-belt drive via separate motor - Steam extraction - Stainless steel sieve plate with filter basket above the wash tank - Suction filter in front of the pump chamber - Water shortage safety feature - Individually height-adjustable feet Technical Data Capacity dipping tank / basket: 280 l Diameter dipping tank / basket: 1150 mm Load capacity: 350 kg / optional 500 kg Temperature min. - max.: 0-60 °C Working height: 700 mm Dimensions (W x D x H): 1570 x 1510 / 1830 x 1495 / 2175 mm Weight: 250 kg Heating power: 10 kW Bsdpfx Aox Izwmoafelc Spray amount: 2x10800 l/h Pump pressure: 2.3 bar Material: Stainless steel Electrical connection: 13.5 kW / 400 V / 50 Hz / 32 A

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, Connection: 3.55 kW / 230 V / 50 Hz External dimensions (WxDxH): 945 x 830 x 1025 mm External dimensions (WxDxH, open): 945 x 830 x 1640 mm Weight: 60 kg Basket diameter: 600 mm Useful height: 380 mm Pump pressure: 2.2 bar Spray volume: 4,200 l/h Load capacity: 100 kg The soiled item to be cleaned is placed in the rotating wash basket and the lid is closed. After setting the desired washing temperature and time, the unit is switched on and the cleaning solution in the tank is heated. Inside the closed machine, the basket rotates at a constant speed around its own axis. The pump system draws the cleaning solution from the wash tank and feeds it through 6 stainless steel spray pipes equipped with overlapping flat jet nozzles. The item is thoroughly sprayed from all sides with hot solution during even rotation of the basket, which is driven by the jet action. After the cleaning cycle is complete, the unit shuts off automatically. Advantages: Bedsxiwc Sepfx Aafslc - 1 horizontally mounted pump - Flow rate: 70 L/min - 3 three-dimensional stainless steel spray pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (Ø 170 mm) - Rotating stainless steel wash basket driven by water jet - Steam extraction - Stainless steel perforated plate with filter inlets above the wash tank - Water shortage safety device

Condition: new, A mass production washing machine where parts are transported by hanger conveyor and washed by passing through tunnels. Washing is done by spraying or immersion ultrasonic dipping. Working Principle: Parts are transferred by hanging on to the hooks of the top loading conveyor belt. General process cycle: Washing - Rinsing - Optionally Ultrasonic Immersion Washing - Drying All of the HANGWASHes are tailor-made and have lots of options depending on your needs. Please feel free ot contact with us for further information. Bodpsd I E Itefx Aafslc

Condition: good (used), Year of construction: 2000, Leutenegger (Starrag) Wash Box Technical Specifications Year of Construction: 2000 Bath Volume: approx. 0.9 m³ Chemicals: Henkel P 3 Voltage: 3x400V/230V 50 Hz Supply Cable: 40 A Control Voltage: 24 V DC Maximum Temperature: 50° C Electric Heating Heating Output: 3x3.25 kW = 9.75 kW Working Pump: 3 kW Exhaust Fan: 0.37 kW Exhaust Air Flow: 400 m³/h Blodpfxod Nciho Aafsc Shipping Costs Upon Request Find more items - new and used - in our shop! International shipping costs upon request!

Year of construction: 2024, condition: as good as new (ex-display), Manual cleaning is carried out with special gloves in the front part. The effectiveness of the cleaning is guaranteed by a high-pressure pump and a special spray nozzle. In these units a temperature of up to 60 °C can be set for the cleaning fluid. The pressure is adjustable from 1- 80 bar. Technical data: Working surface: 950 x 700mm Bledpfof A Nq Aex Aafsc Interior height: 450 mm Load capacity: 70 kg Optional up to 150kg Spray pressure: 1-80 bar adjustable Tank capacity: 75 litres / heating capacity 2kW Basic version: - Frame, feet, cover and housing made of stainless steel - Removable stainless steel panels above the tank - Upward opening flap with 2 reach-throughs and gloves - Toughened glass pane - Door opening/closing system supported by gas pressure springs - Monitoring of the door opening by means of safety limit switch - Filter on the suction side of the pump (500 micron) - Foot switch for operating the cleaning pump - Interior lighting - Neoprene gloves L 600mm (chemical resistant)- Adjustable feet +/- 50 mm Optional: - Cartridge filter in stainless steel with pump (10/25/50 micron) - External mini-pneumatic oil separator

Year of construction: 2025, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system type L90 automatic working hot water part washing machine with basket drive by gear motor, stainless steel washing pump (Fab. Lowara), circulating 3-sided spray system with stainless steel nozzles - Basket diameter: 790 mm - Useful height: 500 mm - maximum loading weight: 150 kg - Spray pressure: 3 bar Bjdpfed Ryxcsx Aafjlc - Tank volume: 105 litres - Heating: electrically adjustable (RT - 90°C) System dimensions (LxWxH): 1,150 x 1,250 x 1,900h mm Kerb weight: approx. 220 kg Wash timer freely adjustable (minutes and hours) complete cleaning machine (interior and exterior cladding) made in stainless steel 1.4301 Water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid locking Bathroom cover with fine filter (2,000 micron) Intake filter as pump protection Operating hour counter Steam swath extraction incl. condensate recirculation Part washer is as good as new (test plant/technical plant) OTHER KORBDIMENSIONS ON REQUEST !!! AVAILABLE

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 0505-V00-003, load capacity: 80 kg, stroke length: 1,500 mm, TECHNICAL DETAILS Bledpfsyfu Rgsx Aafsc Transfer weight: 80 kg Range: 1,500 mm EQUIPMENT 1 magazine (20 pallets) 20 pallets, System 3R GPS 240 Clamping plate 20-M10 Modular SPREITZER clamping block, fixed block unit Setup station with pneumatic swing clamp

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1412-V00-288, load capacity: 50 kg, stroke length: 1,450 mm, TECHNICAL DETAILS Transfer weight: 50 kg Stroke (arm): 1,450 mm Magazine: 60 pallets EQUIPMENT Sliding plate for WorkPal 23 pallets, System 3R Macro 70 Mechanical centric vises Bedpfx Aasyfu D Hjfelc SPREITZER MZQ 110-60 PA

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, load capacity: 150 kg, stroke length: 1,500 mm, TECHNICAL DETAILS Transfer weight: 150 kg Reach: 1,500 mm MACHINE DETAILS Number of magazines: 2 Capacity per magazine: 12 pallets Bedoyfuwgspfx Aafelc EQUIPMENT 12 pallets, System 3R GPS 240 with mechanical centric vise SPREITZER MZS 260-125 A 12 pallets, System 3R GPS 240 with mechanical centric vise SPREITZER MZU 170-60

Condition: used, machine/vehicle number: WSJPRS3277TB12670, axle configuration: 3 axles, first registration: 10/2007, total length: 13,670 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 30 %, wheelbase: 9,000 mm, color: other, Year of construction: 2007, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Drum brakes = More information = Axle configuration Tyre size: 385/65 Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile: 30% Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Blodpfx Aoyg D Hgoafoc Weights Empty weight: 7.920 kg Carrying capacity: 34.080 kg GVW: 42.000 kg Identification Registration number: OK-21-BL

Condition: used, functionality: fully functional, roll width: 410 mm, power: 0.12 kW (0.16 HP), roll spacing: 60 mm, axle spacing: 110 mm, Roller Conveyor Curve / 90-Degree Curve Manufacturer: Soco System Condition: Used Model: Roller Bsdpfx Aajygyhaefelc Type: 90° Total outside width: approx. 1430 mm Total inside width: approx. 820 mm Total width incl. motor: approx. 580 mm Conveying width: approx. 410 mm Roller pitch: approx. 60 mm Axle spacing: approx. 110 mm Roller type: Plastic Material: Steel/Plastic Color: Galvanized, Light Grey, Orange Includes 2 Soco 0.12 kW motors Stock quantity: 4 units Price per unit The conveyor system was fully operational until disassembly. Condition: Fully functional, with signs of use Ideal for fast material handling Internal item number: 2026020302 Pickup address: Industriestraße 5 (47918 Tönisvorst) Professionally dismantled and packaged Thanks to the excellent workmanship of the conveyor system, your materials will glide smoothly to their destination—even under heavy loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, incline conveyors, or telescopic conveyors for loading and unloading your goods, we are your experienced partner! We are happy to provide you with a customized quote or advise you regarding concepts or installation questions. Simply let us know your requirements and local conditions. Benefit from our many years of experience and our extensive network of specialists. We have already successfully completed projects for companies in various sectors, such as logistics, the pharmaceutical industry, trades, or the electronics sector. Together, we will work to optimize your operations and material flow efficiently and sustainably. We can also offer fully automated sorting technology and additional components such as picking shelves or containers.

Condition: used, Year of construction: 2007, functionality: unexamined, machine/vehicle number: AYA320NY3006, overall weight: 950 kg, total length: 1,700 mm, total width: 1,650 mm, total height: 2,120 mm, input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, Mazzali Intensys Lab Burn-in industrial (climate) oven, including manual Type: Intensys Lab 12+12HD Code: AYA320NY3006 Year of construction: 2007 Mains connection: 400V Temperature range: -40°C / +180°C (external cooling) Load capacity: 12 plates Oven Dimensions: 72 x 50 x 72cm Dimensions: 170 x 165 x 212 cm Weight: ~950 kg Bledpfxjwm Htqe Aafsc

Condition: used, axle configuration: 3 axles, first registration: 08/2005, total length: 12,650 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 9,210 mm, Year of construction: 2005, Equipment: ABS, = Additional options and accessories = - Air suspension = Further information = Axle configuration Tyre size: 385/65 R 22.5 Axle make: BPW Brakes: Drum brakes Suspension: Air suspension Blsdsxx Rc Rspfx Aafsc Rear axle 1: Tyre tread left: 20%; right: 20% Rear axle 2: Tyre tread left: 30%; right: 30% Rear axle 3: Steered; tyre tread left: 40%; right: 40% Weights Unladen weight: 7,390 kg Payload: 31,610 kg Gross vehicle weight: 39,000 kg Functional Loading platform height: 130 cm Condition Damage: None Identification Registration number: OH-84-ZK

Condition: used, axle configuration: 3 axles, first registration: 07/2013, loading space length: 10,200 mm, loading space width: 2,500 mm, loading space height: 1,500 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 1,300 mm, Year of construction: 2013, Equipment: crane, Tyre size: 385/65R22,5 Suspension: air suspension Rear axle 1: Steering Drive: Wheel Empty weight: 14.070 kg Carrying capacity: 27.930 kg Bljdpfouc D Uaex Aafjc GVW: 42.000 kg Mast: telescopic (3 parts) Make of bodywork: PALFINGER PK 24001

Condition: like new (used), Year of construction: 2019, Fully operational industrial production line for the manufacture of nicotine and tobacco pouches. Production capacity of up to 750 nicotine pouches per minute or 1,050 tobacco pouches per minute. The line is well maintained and ready for immediate use, making it ideal for capacity expansion or entry into new markets. Bedpeygilbjfx Aafelc The package includes a complete production line with all necessary equipment.

Condition: used, Description: EOS plastic laser sintering system EOSINT P 730 with upgrades Complete with extensive accessories Bsdpfx Aeyghgdsafolc

Condition: used, Year of construction: 2012, Overview  This complete brewhouse was manufactured in 2012 and enables the production of 1,000-liter brews. The system works with steam and includes brewing, fermentation and storage tanks. It is immediately available and is currently installed and ready for operation in the production facility. The seller confirms that the system has worked perfectly until recently. The boilers have a copper coating, while the rest of the system is made of stainless steel. Details Wort yield: 1,000 liters per brew Heating system: Steam Current status: Installed and ready for operation Availability: Immediately Scope of delivery  Brewhouse | Mini Brewery System | CI T 10 | 2012 2 kettles (mash tun above the whirlpool as one unit + separate boiling kettle) Steam boiler | Mini Brewery System | - | 2012 (electric) Plate heat exchanger Hot water tank | 1,500 L Reverse osmosis system | ALFA | compact model | - Capacity: 150-200 L/h 4x Isobaric fermenter | Mini Brewery System | 1,000L | 2012 4x Horizontal isobaric maturation tank | DuoTank | 500 L | 2018 Cooling jacket & bag system for optimum beer preservation Bljdpfev Da Dljx Aafjc

Condition: excellent (used), I am offering a professional DELO dispensing system – DELO-DIV pilot with a DELO-DIV VD450 manual dispenser. This equipment is designed for precise and controlled dispensing of adhesives and various media in industrial applications. The system is ideally suited for use in: • Electronics manufacturing • Automotive sector • Precision assembly • Laboratories and R&D • High-repeatability technical bonding processes Operation is managed via the DELO-DIV pilot touchscreen panel, which allows: • Saving and selection of dispensing programs • Manual dispensing (manual mode) • Precise adjustment of working parameters • Intuitive operator interface The DELO-DIV VD450 manual dispenser ensures high application accuracy and process stability. — Condition • Used • Fully functional • Normal signs of use • The unit powers on and responds correctly (visible in the pictures) — Set includes • DELO-DIV pilot controller (touchscreen panel) • DELO-DIV VD450 manual dispenser • Cables / connectors as shown in the photos — Additional information • Manufactured in Germany • CE / UKCA marking • Ideal for production facilities and process integrators Bljdpfx Asyc H U Seafec

Condition: excellent (used), Year of construction: 2024, TBM-D 2009006 – Position Sensor Box / Inclination Sensor Box V3 Manufacturer: TBM SW-Entwicklung und Elektronik GmbH (Germany) Blsdsyc H R Tjpfx Aafjc Production date: 02/2024 Power supply: 12 V DC, power consumption 70 W Condition: used, very good, fully functional Professional measurement/control box designed for industrial applications. The device is used for handling and processing signals from position/inclination sensors in test systems, automation, and research & development stations. Equipment and features: • LCD display for parameter presentation • Numeric keypad for configuration and operation • D-Sub communication interface • 12 V power sockets • Robust aluminum housing • CE marking • Device inspected (TBM inspection stickers)

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used for, among others: • Quality control (QC) • End-of-line production testing • OEM laboratories and testing stations Bledpsyc H N Njfx Aafsc ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last factory calibration by ETL: 05/2023 • Weight: 38 kg ⸻ Equipment / Included in delivery • Main ATS 400 X8 unit with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE certification ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete

Condition: excellent (used), We offer a professional KEYENCE VL series 3D optical measurement system, designed for fast and precise scanning of technical components. This set is ideal for quality control, reverse engineering, and non-contact measurements in industrial applications. The set includes: – VL-550 scanning head – VL-500 base unit – VL-570 control unit – Original KEYENCE calibration plate – Original transport cases – Complete documentation, manuals, and media Bedpfoyc H Npex Aafelc Condition: very good, well-maintained equipment Note: Set is sold without monitor / PC unit (possibility to equip according to your own preferences) Manufactured: Made in Japan