Used What Expansion for sale (628)

Condition: good (used), Year of construction: 2015, Number of printing decks 8 Max. print width 820 mm Max. material width 850 mm Min. material width 300 mm Min. print length 260 mm if not specified otherwise for optional accessories Air core diameter 76.510 mm Repeat steel lock 310 mm Max. print length 600 mm OPERATION EFFICIENCY Max. mechanic speed 300 m/min FALCON - automatic setting of print registers and impressions Sophisticated system for print control FAST BLADE - system for doctor blade exchange in the machine INKSTORM - automatic wash-up system (option) Bosh Rexroth INDRAMAT direct drive technology JOB MANAGEMENT - preparation of future jobs from remote PC PRINT QUALITY CDTS - central drum thermal stabilization system DYNAMIC IMPRESSION - printing deck impression electronic compensation system Machine design with emphasis on high printing stability Composite graphite cores (option) EASY OPERATION Intuitive touch display (Touch Screen) Easy access to web path Doctor blade chambers with FAST BLADE system for blade quick exchange in the FASTBLADE machine FASTADAPT - doctor blade chamber position automatic adaptation CORONA, AHLBRANDT - 4 kW Side control before printing Printing unit 8-printing deck unit Central drum with diameter of 1,450 mm Gas dying system Printed material cooling unit Unit with cooling cylinder and servo drive Ijdpfxetuc R He Affstr Web guiding system prior to the rewind unit Web fault control system BST SUPER HANDY SCAN 4000 chip digital camera Rewind unit NONSTOP 800 rewind unit For roll max. diameter of 800 mm Roll clamping using pneumatic expansion shaft

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Kaeser compressor ASD 37, in good condition, not used much, made in 2006. Comes with small expansion vessel. Iedpsxl Hwdofx Affjtr

Condition: used, New: Yes Colour: Silver Itedjx D A R Dopfx Affjr Applicable material: Bitumen Empty weight: 9.500 kg Cargo space capacity: 50.000 l Productivity: 50 tph BITUMEN TANK (50 TONS) • Tanks capacity shall be 50 tons. • Tanks shall be produced in accordance with TSE and highway commission practices. • The tank shall incorporate a hot oil heating, • Seamless steel drawn pipe serpentine system to heat • The bitumentemperature up to mixer mixing temperature • The fuel tank shall incorporate level and heat indicator, suction nozzle, filling orifice, ventilation system, inspection hatch and drain outlet. • There shall be support legs under the tank and its surface shall be isolated with 50 mm rock wool and covered with 0,80 mm galvanized sheet. 1. HOT OIL GENERATOR • Generator capacity shall be 2 000.000 kcal/h. • The system shall be made according to diesel fuel system. • The generator shall incorporate a 1500 l filling tank. • The generator shall be horizontal, have seamless steel drawn hot oil pipe, double wall and circulation body. • Generator body shall be isolated with 100 mm rock wool and covered with aluminium sheet. • Generator system shall be produced according to manufacture standards and it shall incorporate an expansion tank, degasser, oil filter, valves and full automatic ignition controlled burner, control panel, pomp and necessary safety equipment. • The serpentine be made of min. 30 m2 seamless steel drawn pipe. • The generator shall be equipped with coupled warning system to protect the complete system in case of dangerous situations showing hot oil level or a decrease in heat transfer oil level. • The burner system shall be designed to activate automatically depending on the adjusted operation temperature of the heat transfer oil. • The system shall be produced in the form of a complete package.

Year of construction: 2024, operating hours: 49 h, condition: as good as new (ex-display), power: 5.5 kW (7.48 HP), overall weight: 1,500 kg, total length: 3,340 mm, total width: 2,360 mm, total height: 2,925 mm, input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: The ASCO SD COMPACT Screen Drum is a robust, semi-mobile solution for recycling, construction, and material processing. Designed for coarse materials such as soil, gravel, wood chips, and waste, it offers precision screening, high throughput, and easy mobility. Its modular design and adjustable settings make it ideal for operators who need flexibility and long-term reliability in demanding environments. Key Features: • Modular construction with variable drum control and adjustable rotation speed • Interchangeable screening technology with vibration support and cleaning brush • Up to four-fraction separation in one drum segment • Adjustable screen inclination and optional bunker expansion (+50% capacity) • Free-ride mode, quick-change bunker, and drum extension for maximum versatility Itjdpfx Asw Rygkjffor Tech Highlights: L 3.34 m · W 2.36 m · H 1.95 / 2.92 m (with support) · Drum L 2.1 m (usable 1.7 m) · Outer Ø 1.3 m · Usable screening surface 7 m² · System capacity 20 – 50 t/h · Mesh Ø 6 – Ø 100 mm · Hopper opening 2.24 × 0.85 m · Speed 5 – 20 rpm · Drive power 400 V / 5.5 kW (optional 7.5 kW) · Filling height 2.55 m · Weight 1500 kg

Condition: good (used), Year of construction: 2008, functionality: fully functional, Technical details grinding length 2000 mm grinding width 850 mm distance spindle center to table 900 mm control Siemens 840 D total power requirement 155 kVA weight of the machine ca. 15 t dimensions of the machine ca. 8815 x 4185 x 2963 mm Additional information CNC Precision Surface and Profile Grinding Machine Technical Specifications: Grinding length 2000 mm Grinding width 850 mm Travel, transverse 750 mm Distance from table to spindle center 900 mm (or 800 mm with intermediate plate) Magnetic plate size 2000 x 700 mm Itodex D Tycjpfx Affsr Table load without magnet 3500 kg Table speed 60 m/min. Spindle drive 26 kW Grinding wheel dimensions 500 x 150 x 203.2 mm Grinding wheel peripheral speed 35 m/s Equipment: 3-axis contouring control Siemens 840 D Grinding programs: Full-cut grinding Face grinding Plunge grinding Path grinding X/Y-axis and Y-Z-axis Profile grinding Automatic program sequence with roughing, finishing, fine finishing and spark-out grinding. Multiple plunge grinding for economical production Surface grinding with continuous, continuously programmable cross feed Grinding wheel calibration Plunge/step grinding Face grinding Dressing in the grinding cycle with lift-off amount Fully automatic compensation of dressing amounts Tool management AC servo drives with ball screw and absolute measuring system in the X, Y, and Z axes Preloaded precision roller guides in the X, Y, and Z axes with linear guides Portable electronic handwheel Automatic belt filter system Coolant heating Electro-permanent magnetic chuck Fully enclosed Direct measuring system in the vertical axis Temperature-controlled machine bed for consistent accuracy Linear motor in the X-axis, table speed max. 60 m/min. Swiveling control panel Continuous speed control of the grinding spindle Electrical linear measuring device for cross-travel adjustment with zero point setting in any position, resolution 0.001 mm Electro-mechanical locking via position control of the headstock in the cross direction for profile and plunge grinding Mechanical extraction of coolant mist TAG table dresser Pre-profiling dresser VPG 190 Diamond grinding wheel, 190 mm diameter Software program for pre-profiling dresser VPG Rough profiling (roughing) CNC table profile dresser TAD 190 Profile depth max. 45 mm Contour accuracy +/- 0.0025 mm Swivel angle +/- 65 degrees Max. dressing speed 210 mm/min. Diamond wheel for table dressing machine TAD 190 Regrinding package for diamond wheel Intermediate plate for raising the magnet WinWop profiling software Import of CAD profile data SP 60 JOB Listing expansion package Additional holes for the magnet clamping plate to facilitate removal of workpieces using compressed air Ghost shift circuit for shutting down the machine after the end of the program

Condition: ready for operation (used), Year of construction: 2021, operating hours: 500 h, General Data Machine weight 117 kg Itedpfxsx D Hduj Affsr Additional Equipment Delta Robot with Platform 2 Cables // 2 Signal Lights 1 Controller with connectors Mode Selector Switch for Controller I/O Expansion for Controller Application Industrial PC 1 Camera with lens and license dongle 2 Conveyor Encoder Kits 2 Documentation Sets 2 Soft Robotics Grippers // 2 Soft Robotics Gripper Controllers This OMRON Quattro 800HS with Platform P30 robot arm was manufactured in 2021. It is designed for precise and rapid handling tasks in various industrial applications. Contact us for more information. Application Types Robotics

Condition: good (used), Creasing and folding machine Heidelberg Stahlfolder + Popp Maschinenbau SRT + MWS Machine in very good condition, ready for production. Like new. Iedpow D E I Ujfx Affstr Year of production 2012. It was used in the production of invitations, photo book inserts and leaflets. Modular design allows for expansion, e.g. installation of marking printers. Technical data: Paper format min 105 x 150 mm Paper format max 520 x 720 mm Feeding from a high stack Main and cross module with the possibility of installing creasing, perforating and cutting tools. Possibility of installing Heidelberg or Techni-Fold tools, Smooth speed regulation Becker compressor Double sheet sensor Electronic counter with packaging Set of inspection cameras.

Condition: used, B&R X20 CP 3586 IF 2772 DI 9371 DO 9322 RA2038 Manufacturer: B&R Industrial Automation Components: 1x X20 CP 3586 3x X20 IF 2772 2x X20 DI 9371 1x X20 DO 9322 Intel ATOM 1.6 GHz with additional I/O processor Ethernet, POWERLINK with Poll Response Chaining and USB on board 3 slots for modular interface expansion CompactFlash as exchangeable program memory 512 MByte DDR2 SDRAM main memory Controller redundancy possible Itodok Abwljpfx Affsr Fanless Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany

Condition: ready for operation (used), Mapal MN5364-08-KF expansion chuck DIN 69882-7 with axial length adjustment Ø 16 mm DIN4000-89-HSK - hollow shank taper base holder, used, normal signs of wear, 100% functional, scope of delivery as per photos Itjdpfx Asi Eb Abjffsr

Condition: used, Year of construction: 1995, material width 300 mm coil weight 1,25 t material thickness 0,4 - 3,5 mm coil internal diameter 320 - 420 mm coil external diameter 1300 mm material cross-cut 750 mm² no. of straightening rolls 11 straightening roll diameter 60 mm Iodpfxswc U Izo Affstr number of draw-in rolls 4 roll diameter 60 mm speed 5 - 30 m/min power requirement 5,0 kW Weight 1,4 t Dimensions (WxDxH) 3,3 x 1,85 x 1,7 m Straightening machine (Type 1675-B11-FQ) with infinitely variable drive, driven straightening rolls, manual individual adjustment of the roller cassette, cntralized adjustment of the material width, outlet rolls Decoiler, single (Type 2350 B-FPS) not driven, with pneumatic lag break, hydraulic centralized expansion, pneumatic snubber roll coil loop control via sensor

Condition: new, power: 180 kW (244.73 HP), fuel type: electric, gearing type: automatic, emission class: euro6, color: white, number of seats: 15, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Sprinter electric rear low-floor vehicle / pre-production vehicle available Base price from 184,990.00 euros Basic vehicle is equipped with : - 5650 kg gross vehicle weight - Automatic gearbox - Driver's comfort seat (optional swivel seat) - Optional fog lights - Front air conditioning - Crosswind assistant - Lane departure warning system Conversion: - Electric battery (one battery pack with 109.6 kWh gross = 96 kWh net) - Maximum electrical power 180 KW (can be throttled) - Torque 345 Nm - Fast charging 100 kW - AC charging with 22 kW - Calculated WLTP range of up to 400 kilometers - Practical range 200 to 300 kilometers Expansion or conversion as follows: - Sprinter rear low-floor with extension - Total length approx. 7800 mm - Single electric door at the front with recessed entrance (entrance height approx. 270 mm) - Rear double-width electric door (access height >300 mm) with manual folding ramp) - 15 sleeper seats or city bus seats - 4 folding seats and 1 wheelchair space in the low-floor rear - 7 standing places - Total capacity 22 passengers - Optional air conditioning in the passenger compartment up to 12 KW - Convectors (electric) throughout - Optional bioethanol auxiliary heating with air in the passenger compartment - Double glazing - Optional panoramic windshield with destination preparation - Optional Lawo destination display behind panoramic windshield and on the side as well as in the rear possible - Radio with 2 loudspeakers at the driver's seat + 4 in the passenger compartment - Multi-level interior lighting - Grab rails with grab loops according to customer requirements - Customer-specific grab buttons on each row of seats Itsdpoxpqpfofx Affor - USB ports on each row of seats - Bumpers painted in body color - Complies with paragraph 30d section 4 of the StVZO Custom order up to 25 PAX possible. Optional extras such as air suspension, refrigerator, WLAN, video surveillance etc. possible. This is an example vehicle. It is not in stock. The delivery time is around 6 months. The vehicle on offer is eligible for the environmental bonus as financial support for buyers of electric vehicles according to the list of eligible electric vehicles, available on the BAFA website.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,377 h, Control Unit Brand HEIDENHAIN Model iTNC 640 General Data Measurements width 2325 mm Measurements depth 4210 mm Measurements height 3108 mm Machine weight 9500 kg Main Drive Spindle speed range 12000 Tool taper SK 40 Number of axis 5 Movement X-Axis Movement 620 mm Y-Axis Movement 520 mm Z-Axis Movement 460 mm Tools Max weight 7 kg Max tool diameter 78/125 mm Max tool length 250 mm Media Internal cooling Yes Chip conveyor Yes Additional Equipment CE compliant Kinematics HH Linear scales in X/Y/Z Blum probe for workpiece measurement Spindle expansion compensation Isdjx D Eb Ejpfx Affetr Handwheel Water gun Working area flushing Spindle oil cooler Oil skimmer This 5-axis KAFO KFO 620 5AX was manufactured in 2019. It features a spindle speed of 12,000 rpm, a tool changer with a capacity of 40 tools, and a spindle taper SK 40. The machine dimensions are 4210x2325x3108 mm, and it weighs 9500 kg. It includes a chip conveyor, spindle oil cooler, and is CE compliant. If you are looking to get high-quality milling capabilities consider the KAFO KFO 620 5AX machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Wohlenberg 92 Paper Guillotine The device is in perfect condition, very low mileage. An unusual machine on the market. This is the newest model, currently in production. In one hands from new. Under a service contract until the very end. Year of production 2011. Technical data: Cutting width: 920 mm Stack height: 120 mm Weight: 2000 kg Power supply: 400 V Isdpfx Asw Ht Uhsffotr Equipment: – programmer with 19” touch screen monitor – CIP-3 and CIP-4 operation, visualization of cutting on the monitor – memory expansion via USB, possibility of connecting the machine to the network – photocells – air table – cutting line – chrome table surface – rear saddle control on a servo motor – super fast work, always stops at „0” – hydraulic clamp with smooth force regulation – user manual – set of tools – sheet metal for clamp – tapping block – spare knife

Condition: ready for operation (used), Siemens 6ES7478-2BA00-0AC0 expansion module E-Stand 2 SN SVPH3227452, used, normal signs of wear, 100% functional, scope of delivery as per photos Itodpfx Afsi Eduvefor

Condition: used, Year of construction: 1970, material width 200 mm coil weight 0,075 t coil internal dia. 290 - 450 mm coil external diameter 800 mm 26 U/min Isdpfxjvzxtgj Affetr power requirement 0,25 kW Dimensions (WxDxH) 0,9 x 0,8 x 1,7 m motoric driven, with manual centralized expansion as is where is, WITHOUT any additional work (see video)

Condition: ready for operation (used), Year of construction: 2009, General Data Measurements width 4540 mm Measurements depth 1400 mm Measurements height 4260 mm Main Drive Number of axis 3 Movement X-Axis Movement 5000 mm Y-Axis Movement 2500 mm Z-Axis Movement 1200 mm Itodpfxjx D Rwfe Affor Additional Equipment software Camio studio This 3-axis measuring machine was manufactured in 2009. The SHIN NIPPON KOKI MM 2500-5012 offers expansive dimensions and capabilities, with an effective distance between columns of 3500mm and axis movements of 5000mm on the x-axis, 2500mm on the y-axis, and 1200mm on the z-axis. It features a maximum feed rate of 10,000 mm/min, supported by AC servo motors, ensuring precise and rapid positioning. The expansive measuring range makes the SHIN NIPPON KOKI MM 2500-5012 machine we have for sale ideal for large-scale precision measurements. For more information on this highly capable machine, please contact us today. Application Types Measuring

Condition: used, material width 320 mm coil weight 2,6 t material thickness 0,5 - 2,0 mm coil internal diameter 400 - 510 mm coil external diameter 1200 mm no. of straightening rolls 7 straightening roll diameter 50 mm number of draw-in rolls 2 band speed 0 - 30 m/min power capacity 1,5 kW Ijdpfx Afovuk Shofstr weight 1,5 t Dimensions (WxDxH) 2,0 x 1,4 x 1,9 m Straightening machine with infinitely variable drive, straightening rolls individually manually adjustable, pneumatic alligator opening of the roller cassette Decoiler with pneumatic lag break, manual centralized expansion as is where is, WITHOUT putting into operation in our warehouse Price for commissioning (in given condition) on request

Condition: ready for operation (used), Year of construction: 2019, Main Drive Max payload 15 kg Media Power consumption 36 kVA This CLOOS QIROX QRC 350-E was manufactured in 2019. It features a maximum payload of 15 kg and a working range up to 4500 mm. Equipped with a QC 2 Master control system, it includes a handheld programming device with an 8.4" touchscreen. The robot supports expansion up to 12 axes and comes with integrated welding software and a digital interface. Consider the opportunity to buy this CLOOS QIROX QRC 350-E welding robot. Contact us for more information about this machine. Isdpox D Hdhsfx Affetr Application Types Welding

Condition: used, Year of construction: 1998, material width 100 - 450 mm material thickness 1,0 - 14,0 mm coil weight 10,0 t coil internal diameter 470 - 520 mm coil external diameter 1100 - 2000 mm no. of straightening rolls 12 straightening roll diameter 2x70 / 2x96 / 8x127 mm number of draw-in rolls 2 Itsdsvuugiepfx Affsr inlet roll diameter 160 mm min. material width 100 mm speed 15 m/min power requirement 75,0 kW weight of decoiler 6,4 t weight of straightening machine 12,8 t dimensions decoiler (WxDxH) 3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH) 2,5 x 3,4 x 2,7 mm Straightening machine RMS Vario-12-70/96/127-450 with infinitely variable drive, driven straightening rolls, supporting rolls, upper straightening cassette hydraulic liftable, hydraulic threading wedge Decoiler HES 12-650 with infinitely varieble insertion drive, pneumatic lag brake, hydraulic snubber roll (motoric driven), hydraulic centralized expansion hydraulic coil lifting device hydraulic loop bridge coil loop control via ultrasonic cropping shears HSO 150-0450 working direction from left to right as is where is, WITHOUT putting into operation - Video at seller's site before dismantling available

Year of construction: 2020, condition: ready for operation (used), General Data Machine weight 15000kg Control Unit Brand SIEMENS Model 840D Additional Equipment Itjdox D Sg Iopfx Affsr Toothed Spindle 1: Tool clamping interface: HSK-C63/ Tool speed max: 4500 1/min /Screw tightening torque, expansion chuck: 20 Nm Toothed Spindle 2: Tool clamping interface: UTS 50 /Tool speed max: 7000 1/min/ Screw tightening torque UTS clamp: 40 Nm This PROFILATOR DV370-HL-05 was manufactured in 2020. A robust and reliable unit, it is ideal for those looking to enhance their machining operations. Consider the opportunity to buy this PROFILATOR DV370-HL-05. Contact us for more information. Application Types Other Machine Tools

Condition: used, Year of construction: 1986, material width 300 mm Itsdpfsvuufrox Affor coil weight 0,5 t coil internal diameter 420 - 520 mm coil external diameter 1400 mm weight 0,6 t dimensions (WxDxH) 0,8 x 1,2 x 1,7 m WITHOUT drive, with pneumatic lag brake, pneumatic centralized expansion as is where is, in given condition

Condition: ready for operation (used), Year of construction: 2009, General Data Machine weight 21000 kg Control Unit Model 31i–Mod.A Brand FANUC Main Drive Number of spindles 1 Spindle speed range 600 Spindle motor power 30 Kw Tool taper ISO 50 Din 69871 Number of axis 4 Movement X-Axis Movement 1000 mm X-Axis Rapid Traverse 48 m/min Y-Axis Movement 800 mm Y-Axis Rapid Traverse 48 m/min Z-Axis Movement 850 mm Z-Axis Rapid Traverse 48 m/min Tools Number of index 60 Media Chip conveyor Yes Itodpfox D I Rvjx Affer Additional Equipment 2 Pallets (dimensions 630 x 630 mm, indexing: 1°, change type: 180° rotary, weight allowed on the pallet: 1,200 kg) Renishaw predisposition Remote electronic handwheel The DOOSAN HM 6300 is a 4-axis horizontal machining centre from 2009 with a CNC FANUC 31i-Mod.A control unit. It offers expansive axis movement: 1000 mm on X, 800 mm on Y, and 850 mm on Z, with rapid 48 m/min travel. The two 630 x 630 mm pallets, with a 1° indexing and 180° rotary change, support 1,200 kg each. The spindle, powered by a 30 kW motor, reaches 6000 rpm, and the 60-position tool chain accommodates various tool sizes. Accessories include a chip conveyor, Renishaw predisposition, and a high-pressure coolant system. Contact us for more details. Application Types Milling

Condition: used, Year of construction: 1993, material width 350 mm coil weight 2,0 t coil internal diameter 470 - 530 mm Iodpjvuuapofx Affotr coil external diameter 1500 mm power requirement 1,0 kW weight 1,5 t dimensions (WxDxH) 1,3 x 1,6 x 1,9 m motoric driven, with manual expansion as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, Year of construction: 1969, material width 100 mm coil weight 0,1 t coil internal diameter 190 - 800 mm coil external diameter 900 mm weight 0,1 t dimensions (WxDxH) 0,65 x 0,9 x 1,4 m motoric driven, with manual expansion, coil loop control Isdpfjvzxnqjx Affetr can be inspected in running condition in our warehouse

Condition: used, Year of construction: 1971, material width 300 mm coil weight 2,0 t material thickness 1,0 - 5,0 mm Itodpfxovut Dtj Affsr coil internal diameter 440 - 520 mm coil external diameter 1320 mm no. of straightening rolls 6 straightening roll diameter 70 mm number of draw-in rolls 2 diameter of draw-in rolls 70 mm power requirement 1,1 kW weight of decoiler 2,0 t dimensions decoiler (WxDxH) 2,0 x 2,0 x 1,7 mm weight of straightening machine 1,3 t dimensions straightener (WxDxH) 2,7 x 1,3 x 2,4 mm Straightening machine RM-S 300 with infinitely variable drive, pneumatic intermittent lifting, hydraulic inlet table, bending roll, alligator opening, coil loop control Decoiler H 2 with auxiliary drive, pneumatic snubber roll, hydraulic expansion, manually shiftable as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request