Used What Expansion for sale (1,517)

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € Dm. 200x78x78 mm 2800 1/min 300 mm 300x150x55 mm 350x150 mm 500x160 mm 3.6 kW 1020 mm 820 mm 2170 mm 440 kg This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced Lhsdpfx Asyv Iqvohvjd die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: new, Year of construction: 2024, Laser engraving machine for home use and hobby. This table-top equipment can also cut wood, paper, cardboard, acrylic, and fabric. A Wattsan СO2 laser engraver is primarily intended for cutting small workpieces. Compact, trustworthy, and precise — exactly what you need. Wattsan 6040 engraver operates plywood, wood, plastics, rubber, leather, fabric, and much more. It can cut materials up to 7-8 mm. It’s often used for souvenirs production, stamps, little decorations, etc. You can give our managers a call for additional details! Wattsan 6040 characteristics Working area: 600x400 mm Laser power: 90-100 W Working table lowering depth: 200 mm Positioning precision: 0,03 mm Machine size: 765 x 1165 x 600 mm Packing size: 860 x 1250 x 790 mm Weight: 121 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. Lhedpfxjh Uc Ers Ahvod YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2024, Laser engraving machine for home and hobby. This table-top equipment can also cut wood, paper, cardboard, acrylic, and fabric. A Wattsan СО2 laser engraver is first and foremost designed for carving tiny workpieces. Compact, dependable, and precise — just what you need. Wattsan 0203 micro engraver operates plywood, wood, plastics, rubber, leather, fabric, and much more. It can cut materials up to 5 mm. It’s often used for souvenirs production, stamps, little decorations, etc. You can give our managers a call for additional details! Wattsan 0203 micro characteristics Working area: 200x300 mm Laser power: 40 W Positioning precision: Up to 0,05 mm Machine size: 810 x 500 x 265 mm Lhjdpjh R Iy Asfx Ahvsd Packing size: 935 x 630 x 370 mm Weight: 38 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our website you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2024, Laser engraving machine for home and hobby. This table-top equipment can also cut wood, paper, cardboard, acrylic, and fabric. A Wattsan СО2 laser engraver is first and foremost designed for carving tiny workpieces. Compact, dependable, and precise — just what you need. Wattsan 0503 micro engraver operates plywood, wood, plastics, rubber, leather, fabric, and much more. It can cut materials up to 5-6 mm. It is commonly used in the creation of souvenirs, stamps, and other decorations. You can give our managers a call for additional details! Wattsan 0503 characteristics Working area: 500x300 mm Laser power: 60 W Working table lowering depth: 200 mm Positioning precision: 0,03 mm Machine size: 650 x 1040 x 575 mm Lhodpfx Aheh D Rvpjved Packing size: 765 x 1140 x 710 mm Weight: 104 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our website you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: good (used), Vibration damper, compensator, damper, expansion compensator, expansion piece, bellows compensator, stainless steel compensator -Vibration damper: Stainless steel expansion compensator bellows compensator, unused Lhedpfxeyvq Ike Ahvjd -Flange: Type HG20592 OCr18Ni9 DN 200 -Size: DN 200 -Bolt circle: Ø 295 / 22 mm -Quantity: 1x damper available -Dimensions: 390/380/H235 mm -Weight: 19.7 kg

Condition: good (used), Creasing and folding machine Heidelberg Stahlfolder + Popp Maschinenbau SRT + MWS Machine in very good condition, ready for production. Like new. Year of production 2012. It was used in the production of invitations, photo book inserts and leaflets. Modular design allows for expansion, e.g. installation of marking printers. Technical data: Paper format min 105 x 150 mm Paper format max 520 x 720 mm Lhedpfxeyvp E Is Ahvsd Feeding from a high stack Main and cross module with the possibility of installing creasing, perforating and cutting tools. Possibility of installing Heidelberg or Techni-Fold tools, Smooth speed regulation Becker compressor Double sheet sensor Electronic counter with packaging Set of inspection cameras.

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 223A011235001, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Arch Size: 600 x 600 mm Strap width: 5-9 mm Year: 2012 Machine-No.: 223A011235001 Condition: Refurbished Our latest project was the refurbishment of this fully automatic strapping machine SMB CUBE 600x600c from 2012. You might be able to see from the outside and from the price that this CUBE is a second-hand machine, but when you look at the list of spare parts and labour hours used, it becomes clear: this machine has been extensively refurbished to its original condition and is now as good as new; perhaps even a little better. As good as new with the CUPASO refurbishment With our reconditioned used machines, you get as-new technology at used machine prices. We make sure that we only refurbish technology that still meets today's requirements. This also applies to the SMB CUBE 600x600c offered here. We also offer you our comprehensive service for this refurbished device. In addition to our 12-month guarantee, this includes the long-term supply of consumables, spare parts and technical service. Prepared for integration into automated packaging lines Even as a stand-alone machine, this CUBE can be customised to your requirements. The machine detects incoming parcels or product stacks and straps them once or several times according to the previously defined parameters. With the help of the pneumatic package press and the package height-dependent strap tension, packages of different sizes and characteristics can be processed unsorted and individually. By adding a machine of the same design, which is also available from us, it is even possible to realise cross or multiple strapping at high speeds. This is what we promise Our guarantee commitment of a full 12 months of course also applies to our SMB CUBE 600x600c. This means you are on the safe side. If something should break during this period, we will replace the defective component and install it at our expense (excluding wear and tear and travel). And if you decide quickly, you will receive our exclusive pre-sale discount of 10%. Do you have any questions? We look forward to your call or e-mail and will be happy to show you our current projects and new equipment in our showroom. Why don't you come and visit us? Features: • Economical due to maximum availability • Robust and extremely low-maintenance design • Simplest handling • Minimal space requirement • Best cost/benefit ratio • Max. 35 parcels/min; depending on back-tensioning path and frame size, without package pressing • Mobile machine (2 fixed/ 2 steerable rollers with brake) • Table height 770 -1000mm • Driven conveyor belts • Machine colour: Frame RAL 7004 / Frame RAL 7016 Special features: • Signal exchange: 2 x counter plug with tool • Additional light sensor for mounting on leading or following machine • Signal exchange: Do not strap package Lhodpfet Uzv Tox Ahvod • External button: Do not strap package • Package height-dependent belt tension (laser sensor) • Pneumatic package press (600x600) • Double press bar 600 • Draw-in protection on table top, infeed side

Condition: excellent (used), Year of construction: 2000, controller manufacturer: Cybelec DNC 1200, bending force (max.): 2,000 t, working width: 15,400 mm, stroke length: 850 mm, distance between stands: 12,000 mm, operating speed: 8 mm/s, number of axes: 8, overall weight: 407,000 kg, total length: 15,400 mm, total width: 6,500 mm, total height: 11,400 mm, Extra Heavy Duty Pressbrake 1 set top tooling 88 Gr 1 set lower dies Cybelec DNC 106EC controller Y1,Y2,X,R1,R2,R3,R4,OWK Ljdpfxeyvh Are Ahvjhd Dynamic Crowning Lower Beam What kind off jobs built for: Shipbuilding & Naval like ; Hull sections, deck plates, bulkheads ribs Defence & Military; armored vehicle structures, reinforced structe hardox / strenx Mining and Heavy Equipment; dump bodies, crusher housing, excevator, chute liners Contruction and Fabrication; bridge giders, box columns, steel frames  On and Offshore; pilers, decks, spreaders, crane componenet, wind energy offshore parts Boiler an vessels; pressure vessels, power plant components, tower or pole section   Bending examples: 35 mm thickness at 10 meter length 26 mm thickness at 12 meter length 20 mm thickness at 15 meter length Max. bending length: 15400mm Distance between column: 12000mm Max. pressing force: 2000T Dis. Beam - Table: 1500mm Beam stroke: 850mm Troth beam: 1250mm Approch speed: 80mm/min. Working speed: 8mm/min. Return speed: 80mm/min. Number of controlled axis:10 Crowning: Yes Hydraulic toolclamping: Yes Power: 132kW Length: 15400mm Width: 6500mm Height: 11400mm Weight: 407000kg

Condition: used, Year of construction: 2020, lifting height: 10,890 mm, mast type: duplex, color: other, Empty weight: 9.200 kg Lifting capacity: 1.200 kg Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2020 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: 612334X00163 - Working level: Hoog - Lifting capacity: 1200kg - Lifting height: 10890mm - Overhead clearance: 6000mm - Mast: Duplex - Transport weight [kg]: 9200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Lhodpfsx S Hwasx Ahvjd Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: reconditioned (used), Year of construction: 2016, operating hours: 735 h, functionality: fully functional, working width: 880 mm, area performance: 5,300 m²/h, overall weight: 760 kg, warranty duration: 12 months, water tank capacity: 140 l, HAKO SCRUBMASTER B140 R SCRUBBER NEW 6V 250Ah GEL BATTERIES (SIAP) (4x) NEW NEOS 24V 30A CHARGER Manufactured in 2016 with 735 hours of operation 880mm cleaning head equipped with two new medium-hard disc brushes for work on any surface New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products. New rubber guards around the brush head prevent water from splashing outside the machine's outline. The device is equipped with new, durable drain hoses and a suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 880 Suction width (mm): 1100 Theoretical capacity (m²/h): 5300 Clean/dirty water tank capacity (l): 140/140 Number of brushes (pcs): 2 Brush speed (rpm): 210 Weight without batteries (kg): 365 Ljdpfjywtarox Ahvohd Total weight, ready to use (kg): 760 Gradeability (%): 10 INCLUDED: NEW 6V 250Ah SIAP GEL BATTERIES (x4) NEW 24V 30A NEOS BATTERY CHARGER NEW 24V 600W suction turbine NEW 445mm PPL 0.5 disc brushes (x2) NEW drain hoses (x2) NEW suction hose NEW head guard rubbers (x2) Squeegee blade with new rubbers 5L Tenzi Normal fluid - FREE KEY FEATURES: The 140-liter tank allows for a large amount of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. A small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the cleaned surface. The large working width (880 mm) ensures high surface coverage. The control panel is very easy to read and intuitive to use.

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 3,427 h, load capacity: 5,000 kg, lifting height: 6,000 mm, free lift: 2,850 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,850 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,380 mm, fork length: 1,500 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 3X10-12, rear tire type: superelastic tires (black), rear tire size: 28X12,5-15, overall weight: 12,200 kg, empty load weight: 7,200 kg, total height: 2,550 mm, total length: 2,500 mm, total width: 2,250 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, 🚜 USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 🚛 Years of Experience | In-house Service & Paint Shop | Professional Consulting | Own Transport | After-Sales Support Looking for a forklift you can truly rely on? We are a renowned dealer of new and used forklifts with a long-standing tradition. Serving customers all across Europe – from small businesses to international industrial plants – we deliver more than machines: we deliver confidence that your logistics will run smoothly and reliably. Lhsdoywr Ubjpfx Ahvod 🌟 What Makes Us Stand Out? ✅ Every forklift undergoes a complete technical overhaul (inspection, testing, oil & filter replacement, refurbishment of key components) ✅ Optional UDT safety inspection on request ✅ Own paint shop & service workshop – forklifts perfected in both looks and performance ✅ European-wide transport handled by our own fleet and trained drivers ✅ Operator training upon delivery + machine functionality test at your site ✅ Full after-sales technical support – we’re here for you even after the deal is done ✅ See & test the machine at our headquarters – we welcome you! ✅ Hundreds of satisfied customers across Europe – join those who already trust us ✅ Financing support – we work with most leasing providers ✅ Invoice in EUR or PLN – according to your preference 📦 AVAILABLE NOW: COMBILIFT C5000XL – 4-Way Multi-Directional Forklift ✅ Year: 2017 ✅ Hours: 3,479 mth ✅ Drive: GAS ✅ Capacity: 5,000 kg ✅ Mast: Duplex – 6,000 mm ✅ Fork Positioner: 1,380 mm | Forks: 1,500 mm ✅ Solid Rubber Tires – 100% condition ✅ Free Lift: 2,850 mm ✅ Technical Condition: Excellent – fully serviced ✅ Visual Condition: Clean, no rust, ready to work 📏 Dimensions: Height: 2,550 mm Length: 2,500 mm Width: 2,250 mm Fork Positioner Width: 1,380 mm Overall Height: 3,850 mm 🏭 Perfect For: Warehouses with narrow aisles Wood, steel, and tube industries Handling long loads Indoor & outdoor operations 🔧 FT LOGISTICS – Quality You Can Rely On. Service You Can Trust.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 3,351 h, load capacity: 3,000 kg, lifting height: 3,350 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,300 mm, fork carriage width: 2,000 mm, fork length: 1,200 mm, fork width: 100 mm, fork thickness: 50 mm, tire condition: 100 %, front tire size: 275/70 R22,5, rear tire size: 7.00-12, overall weight: 7,700 kg, empty load weight: 4,700 kg, total height: 2,300 mm, total length: 3,000 mm, total width: 1,320 mm, color: red, Equipment: CE marking, cabin, fork extension, lighting, pallet forks, sideshift, -- USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS -- 🛠️ Years of experience | 🧰 In-house service & paint shop | 🤝 Professional advice | 🚛 Own transport | 🔧 After-sales support Lhjdpfjywr Syex Ahvjd Looking for a forklift you can trust? We are a reputable dealer of new and used forklifts with many years of experience. We serve customers throughout Europe – from small businesses to multinational industrial enterprises. Our machines are more than just equipment – they are a guarantee of reliability for your logistics operations. -- What sets us apart? -- ✅ Each forklift undergoes a comprehensive technical check (inspection, testing, oil & filter change, overhaul of key components) ✅ Full CE/UVV/LOLER inspection available upon request ✅ Own paint shop and service workshop – every machine is thoroughly inspected and visually upgraded ✅ Delivery throughout Europe – handled by our dedicated fleet and trained drivers ✅ Operator training and functional testing upon delivery ✅ After-sales support and technical assistance – we’re here for you beyond the sale ✅ On-site machine demonstrations and test drives available ✅ Hundreds of satisfied customers across Europe – join their ranks today ✅ Financing available – we cooperate with most leasing companies ✅ Invoices available in EUR or PLN – your choice -- FOR SALE: -- 🟥 MANITOU MSI30 – Diesel counterbalance forklift with double pallet handler 📅 Year: 2016 ⏱️ Operating hours: 3,351 hrs 🔋 Power: Diesel 📦 Load capacity: 3,000 kg 📏 Mast: Duplex – lifting height 3,350 mm 📐 Overall height: 2,300 mm 🔩 Wide fork carriage with double pallet function 🔄 4 forks – use as a standard forklift or to move two pallets simultaneously 🛞 Pneumatic tires – brand new set 🧪 Condition: Excellent – fully serviced 🎨 Appearance: Very good, rust-free, ready for immediate operation -- Ideal for: -- 🏭 Logistics and distribution centers 🍾 Food & beverage, construction sectors 📏 Double pallet handling 🚧 Outdoor and yard operations -- FT Logistics – Quality you can rely on. Service you can trust. 💼

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, operating hours: 362 h, load capacity: 3,000 kg, lifting height: 5,940 mm, free lift: 1,720 mm, load center: 450 mm, fuel type: electric, mast type: triplex, construction height: 2,780 mm, motor manufacturer: ELECTRIC, gearing type: hydrostat, battery capacity: 625 Ah, remaining battery capacity: 95 %, battery voltage: 80 V, fork carriage width: 3,350 mm, fork length: 800 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 405x220x305, rear tire type: cushion tires (black), rear tire size: 27x10-12, overall weight: 9,200 kg, empty load weight: 6,200 kg, total height: 2,780 mm, total length: 2,000 mm, total width: 2,620 mm, color: red, Equipment: CE marking, adjustable boom, all wheel drive, cabin, full service history, lighting, pallet forks, COMBILIFT C3000ET – 2020 | 362 MTH | ELECTRIC | TRIPLEX 5940 mm | WIDE FORK POSITIONER Ready to work from day one – no investment, no risk ✔️ --- Why choose this forklift? Looking for a machine that will keep your operations running? This COMBILIFT C3000ET has been fully serviced and is immediately operational – no hidden costs. * Complete service performed (oils, filters, full inspection) 🔧 * Condition: like new ✨ * Only 362 operating hours ⏱️ Lodpfx Ahsywpi Nsvohd * New tyres – no extra costs 🛞 --- Key specifications * Capacity: 3000 kg * Drive: ELECTRIC ⚡ * Mast: Triplex – 5940 mm * Fork positioner: 3350 mm * Forks: 800 mm * Full heated cabin --- Technical data * Year: 2020 * Hours: 362 MTH * Weight: 6200 kg * Battery: 80V / 625 Ah * Free lift: 1720 mm Condition: Technical: 5/5 ✔️ Visual: like new ✨ --- Ideal for * Narrow aisles 🏭 * Long loads 📦 * Indoor & outdoor use --- What you get * Fully inspected machine ✔️ * Immediately ready for operation 🚀 * Online demonstration available 💻 * Delivery to your premises 🚚 --- Why FT LOGISTICS? * Over 100 machines in stock * In-house service 🔧 * Europe-wide experience * Trusted by customers 🤝

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, operating hours: 362 h, load capacity: 3,000 kg, lifting height: 5,940 mm, free lift: 1,720 mm, load center: 450 mm, fuel type: electric, mast type: triplex, construction height: 2,780 mm, motor manufacturer: ELECTRIC, gearing type: hydrostat, battery capacity: 625 Ah, remaining battery capacity: 95 %, battery voltage: 80 V, fork carriage width: 3,350 mm, fork length: 800 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 405x220x305, rear tire type: cushion tires (black), rear tire size: 27x10-12, overall weight: 9,200 kg, empty load weight: 6,200 kg, total height: 2,780 mm, total length: 2,000 mm, total width: 2,620 mm, color: red, Equipment: CE marking, adjustable boom, all wheel drive, cabin, full service history, lighting, pallet forks, COMBILIFT C3000ET – 2020 | 362 MTH | ELECTRIC | TRIPLEX 5940 mm | WIDE FORK POSITIONER Ready to work from day one – no investment, no risk ✔️ --- Why choose this forklift? Looking for a machine that will keep your operations running? This COMBILIFT C3000ET has been fully serviced and is immediately operational – no hidden costs. * Complete service performed (oils, filters, full inspection) 🔧 * Condition: like new ✨ * Only 362 operating hours ⏱️ * New tyres – no extra costs 🛞 --- Key specifications Ledpfsywpipex Ahvshd * Capacity: 3000 kg * Drive: ELECTRIC ⚡ * Mast: Triplex – 5940 mm * Fork positioner: 3350 mm * Forks: 800 mm * Full heated cabin --- Technical data * Year: 2020 * Hours: 362 MTH * Weight: 6200 kg * Battery: 80V / 625 Ah * Free lift: 1720 mm Condition: Technical: 5/5 ✔️ Visual: like new ✨ --- Ideal for * Narrow aisles 🏭 * Long loads 📦 * Indoor & outdoor use --- What you get * Fully inspected machine ✔️ * Immediately ready for operation 🚀 * Online demonstration available 💻 * Delivery to your premises 🚚 --- Why FT LOGISTICS? * Over 100 machines in stock * In-house service 🔧 * Europe-wide experience * Trusted by customers 🤝

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, operating hours: 362 h, load capacity: 3,000 kg, lifting height: 5,940 mm, free lift: 1,720 mm, load center: 450 mm, fuel type: electric, mast type: triplex, construction height: 2,780 mm, motor manufacturer: ELECTRIC, gearing type: hydrostat, battery capacity: 625 Ah, remaining battery capacity: 95 %, battery voltage: 80 V, fork carriage width: 3,350 mm, fork length: 800 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 405x220x305, rear tire type: cushion tires (black), rear tire size: 27x10-12, overall weight: 9,200 kg, empty load weight: 6,200 kg, total height: 2,780 mm, total length: 2,000 mm, total width: 2,620 mm, color: red, Equipment: CE marking, adjustable boom, all wheel drive, cabin, full service history, lighting, pallet forks, COMBILIFT C3000ET – 2020 | 362 MTH | ELECTRIC | TRIPLEX 5940 mm | WIDE FORK POSITIONER Ready for work from day one – no investment, no risk ✔️ --- Why this forklift? Looking for a machine that won’t halt your operations? This COMBILIFT C3000ET is fully serviced and ready to work immediately – no hidden costs. * Full service completed (oils, filters, detailed inspection) 🔧 * Condition: like new ✨ * Only 362 operating hours ⏱️ * New tyres – no additional costs 🛞 --- Key specifications * Capacity: 3,000 kg * Drive: ELECTRIC ⚡ * Mast: Triplex – 5,940 mm * Fork positioner: 3,350 mm * Forks: 800 mm * Fully heated cabin --- Technical details * Year: 2020 * Hours: 362 MTH * Weight: 6,200 kg * Battery: 80V / 625 Ah * Free lift: 1,720 mm Condition: Technical: 5/5 ✔️ Visual: like new ✨ --- Ideal for Lhsdpfxsywpiie Ahvjd * Narrow aisles 🏭 * Long loads 📦 * Indoor & outdoor use --- What’s included * Fully inspected machine ✔️ * Immediately ready for operation 🚀 * Online presentation available 💻 * Delivery to your site 🚚 --- Why FT LOGISTICS? * 100+ machines in stock * In-house servicing 🔧 * European market experience * Trusted customer base 🤝

Condition: used, Year of construction: 2008, material width 600 mm coil weight 2 x 1,5 t coil internal dia. 370 - 630 mm coil outside dia. 1560 mm speed 12 U/min Power capacity 1,1 kW Weight 1,5 t Dimensions (WxDxH) 2,5 x 1,2 x 1,9 m Ledpfx Aov Svbijhvohd double decoiler, swivellable with motor, manual expansion, coil loop control

Condition: used, Year of construction: 1995, material width 400 mm Lhodpfx Asvuungehvod coil weight 2,0 t coil internal dia. 480 - 520 mm coil outside dia. 1500 mm with hydraulic auxiliary drive with mechanical lag brake, hydraulic centralized expansion, pneumatic snubber roll, coil loop control via contact plate min. material width 20 mm

Condition: used, Year of construction: 2001, material width 410 mm coil weight 2,0 t coil internal diameter 380 - 520 mm coil external diameter 1400 mm power requirement 2,2 + 1,1 kW weight of decoiler 0,7 t dimensions decoiler (WxDxH) 1,4 x 1,4 x 1,65 mm weight of the pulling device 1,15 t required space of the pulling device (WxDxH) 1,7 x 1,1 x 2,2 m Decoiler 2370 DFPS without drive, with pneumatic lag brake, hydraulic centralized expansion, pneumatic snubber roll pulling device / hydraulic threading device 235 D with infinitely variable drive, coild loop control via ultrasonic material thickness up to approx. 6,0 mm roll diameter approx. 160 mm Ljdpfovut Thox Ahvehd

Condition: used, Year of construction: 1969, material width 100 mm coil weight 0,1 t coil internal diameter 190 - 800 mm coil external diameter 900 mm weight 0,1 t Lsdpovzxnqefx Ahvshd dimensions (WxDxH) 0,65 x 0,9 x 1,4 m motoric driven, with manual expansion, coil loop control can be inspected in running condition in our warehouse

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 3,603 h, load capacity: 3,000 kg, lifting height: 4,900 mm, free lift: 1,550 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 2,300 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,200 mm, fork length: 1,150 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 16X7-10, rear tire type: superelastic tires (black), rear tire size: 23X10-12, overall weight: 8,200 kg, empty load weight: 5,200 kg, total height: 2,350 mm, total length: 2,300 mm, total width: 2,250 mm, color: green, motor model: V1505-T, Equipment: CE marking, adjustable boom, all wheel drive, cabin, lighting, pallet forks, sideshift, -- USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS -- 🔧 Years of experience | 🛠️ In-house service & paint shop | 🤝 Professional consultation | 🚛 Own transport fleet | 📞 After-sales support Looking for a reliable forklift? We are a dependable dealer of new and used forklifts with a longstanding reputation. We serve customers across Europe – from small enterprises to major industrial facilities. Our forklifts offer more than just machinery; they are your assurance of smooth and dependable logistics operations. What sets us apart? ✅ Every forklift undergoes comprehensive technical servicing (inspection, testing, filter and oil replacement, refurbishment of key components) ✅ UDT full certification available on request ✅ In-house paint shop & service workshop – machines perfected both technically and visually ✅ Europe-wide transport with our own trained drivers ✅ Operator training upon delivery + operational demonstration at your location ✅ Technical and service support after purchase – we’re here for you even after the sale ✅ Machine viewing and testing available at our site – you’re welcome to visit! ✅ Hundreds of satisfied customers throughout Europe – join our trusted partners ✅ Financing support – cooperation with leading leasing companies ✅ Invoice in EUR or PLN – as preferred by the client AVAILABLE NOW: Lhedpfjywlrgjx Ahvsd COMBILIFT C3000 – 4-way forklift ✅ Year manufactured: 2013 ✅ Operating hours: 3,603 hrs ✅ Drive: Diesel ✅ Capacity: 3,000 kg ✅ Mast: Triplex – 4,900 mm ✅ Fork positioner 1,200 mm | Forks 1,150 mm ✅ Superelastic tyres – 100% condition ✅ Technical condition: Excellent – after major service ✅ Visual condition: Very well maintained, corrosion-free, fully work-ready ✅ Free lift: 1,550 mm 📏 Dimensions: Height: 2,350 mm Overall length: 2,300 mm Width: 2,250 mm Positioner width: 1,200 mm Height of structure: 2,300 mm Ideal for: 🏭 Warehouses with narrow aisles 🌲 Wood, steel, and pipe industries 📦 Handling of long goods ⚙️ Operations both indoors and outdoors

Condition: reconditioned (used), Year of construction: 2020, operating hours: 257 h, functionality: fully functional, working width: 650 mm, area performance: 2,900 m²/h, overall weight: 237 kg, warranty duration: 12 months, water tank capacity: 42 l, HAKO SCRUBMASTER B45 CL TB650 SCRUBBER NEW 12V 105Ah SIAP GEL BATTERIES (2x) Manufactured in 2020 with 257 hours of operation 650mm cleaning head (TB650) equipped with two new medium-hard disc brushes for work on any surface New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products. The built-in battery charger and wheel drive simplify daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 650 Suction nozzle working width (mm): 950 Theoretical capacity (m²): 2900 Brush speed (rpm): 210 Tank capacity (l): 42/42 Machine weight, ready to use (kg): ~237 Power (kW): 1.31 INCLUDED: NEW 12V 105Ah SIAP GEL BATTERIES (2x) NEW 330mm PPL 0.5 disc brushes (2x) NEW 24V 400W suction turbine NEW suction hose NEW drain hose NEW head guard rubber Squeegee blade with new oil-resistant rubbers Built-in battery charger 5 liters of Tenzi Normal solution - FREE Lhedpeywli Eefx Ahved KEY FEATURES: The 42-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The large working width (650mm) ensures high surface coverage. The control panel is very clear and intuitive.

Condition: reconditioned (used), Year of construction: 2015, operating hours: 721 h, functionality: fully functional, working width: 750 mm, area performance: 4,800 m²/h, overall weight: 716 kg, warranty duration: 12 months, water tank capacity: 116 l, HAKO SCRUBMASTER B115 R TB750 SCRUBBER NEW 6V 250Ah GEL BATTERIES (SIAP) (4x) Ledpoywk Uaofx Ahvohd Manufactured in 2015 with 721 hours of operation. 750mm cleaning head (TB750) equipped with two new medium-hard disc brushes for use on any surface. New polyurethane squeegee rubbers, resistant to oil, grease, and petroleum products. New rubber guards around the brush head prevent water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 750 Suction width (mm): 950 Theoretical capacity (m²/h): 4800 Clean/dirty water tank capacity (l): 116/116 Number of brushes (pcs): 2 Brush speed (rpm): 210 Total weight, ready to use (kg): 716 Gradeability (%): 10 INCLUDED: NEW 6V 250Ah SIAP GEL BATTERIES (x4) NEW 24V 600W suction turbine NEW 380mm PPL 0.5 disc brushes (x2) NEW drain hose NEW suction hose NEW head guard rubbers (x2) Built-in battery charger Squeegee blade with new rubbers 5L Tenzi Normal fluid - FREE KEY FEATURES: The 116-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the surface being cleaned. The large working width (750mm) ensures high surface coverage. The control panel is very clear and intuitive to use.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, empty load weight: 133 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 895 S HOT WATER WASHER NEW HEATING COIL The device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and 1000 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~ 3-phase Discharge capacity [l/h]: 1000 Operating pressure [bar]: 180 Max. Heating temperature [°C]: 85-155 Connection power [kW]: 6.4 Detergent tank [l]: 20 Hose length [m]: 10 Weight [kg]: 133 EQUIPMENT: NEW HEATING COIL NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Lhjdpfx Asywkkuohvjd Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to use servicing The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes.

Condition: good (used), Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, bus module, bus module, Ethernet -Manufacturer: HMS, Anybus module -Type: ABX-EMBS-PDPS -Number: 3x module available -Price per piece -Dimension: 140/110/H50 mm Lhedpfx Aomdygmjhvod -Weight: 0.5 kg/pc.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 160 bar, empty load weight: 96 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 798 C Eco HOT WATER WASHER NEW HEATING COIL The device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 170 bar and 750 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model: HDS 798 C Eco Power supply voltage (V): 400 ~ 3 phase Discharge capacity (l/h): 750 Operating pressure (bar): 30 - 170 Ljdpeywi Ewjfx Ahvohd Max. Water heating temperature (C): 80-155 Connection power [kW]: 5.6 Dimensions (L x W x H mm): 940 x 600 x 740 Pressure hose length (m): 10 Weight (kg): 96 EQUIPMENT: NEW HEATING COIL NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components housing make the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes.