Used Werit Heating Oil Tank for sale (27,222)

Condition: used, tank capacity: 650 l, GENERAL INFORMATION Equipment: Spray head Design: upright Remarks: Metallic discoloration on the inside Rbodpfxexqa T No Ahzst Speed: 1415 rpm Outer diameter: 1,040 mm Inner diameter: 900 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Total height: 2,380 mm Heating/Cooling: present Insulation: present Power: 1 kW Max. permissible operating temperature: 170 °C Max. permissible operating overpressure: 8.0 bar Max. overpressure: 1.50 bar Agitator: Propeller Location: Bremen Technical documentation: Drawing, acceptance certificate Cylinder temperature control: Half-pipe coil Nameplate: Volume: 650 liters Cylinder wall thickness: 6.0 mm Double jacket material: V2A 1.4301 (AISI304) Product contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 900 mm Previous application: Pharmaceuticals VESSEL Max. permissible operating temperature: 170 °C Base design: on feet Number of feet: 4 HEATING/COOLING JACKET Bottom temperature control: Half-pipe coil INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel FITTINGS Manhole / dome: in the top lid (DN 400) Discharge outlet: 25 mm MATERIAL SPECIFICATION Feet material: stainless steel AGITATOR Voltage: 220/380 Volt Agitator position: eccentric, in top lid TECHNICAL DATA / DIMENSIONS Base wall thickness: 5.0 mm

Condition: used, tank capacity: 265 l, GENERAL INFORMATION Design: vertical Remarks: Cone height approx. 1200 mm; handhole approx. 220 x 315 mm; handhole collar and handhole cover made of Fe; one vessel is missing the handhole cover; handhole cover fastenings are incomplete on the other vessels Speed: 90 - 546 rpm Explosion-proof: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Total height: 3,350 mm Heating/cooling: available Power: 1.5 kW Max. permissible operating temperature: 100 °C Max. permissible operating overpressure: 0.49 bar Max. overpressure: 20.5 bar Agitator: propeller Location: Bremen Nameplate: Rbedpfx Aexqa T Aehzst Volume: 265 liters Double jacket volume: 25.0 liters Double jacket material: V2A 1.4301 (AISI304) Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: steel alloys VESSEL Max. permissible operating temperature: 100 °C Lower head: conical bottom Support type: on feet Number of feet: 4 pcs HEATING/COOLING JACKET Lower head temperature control: double jacket EQUIPMENT Manhole/dome: handhole Outlet: available Note: slight residues MATERIAL SPECIFICATION Feet material: steel AGITATOR Voltage: 290/500 V Agitator arrangement: eccentric in upper head Agitator equipment: 1 agitator 59 - 363 rpm

Condition: used, tank capacity: 30,000 l, GENERAL Equipment: Crane lugs Design: vertical Remarks: Manhole diameter approx. 580 mm; metallic discoloration inside in the upper head area; insulation jacket with dents and minor sheet metal cutouts External diameter: 2,720 mm Internal diameter: 2,480 mm Total height: 8,050 mm Heating/cooling: available Insulation: available Max. permissible operating temperature: 160°C Max. permissible operating overpressure: 6.0 bar Agitator: agitator flange Location: Bremen Nameplate: Volume: 30,000 liters Double jacket volume: 90.0 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 5,980 mm Last application: wool grease TANK Max. permissible operating temperature: 70°C Stand type: feet Number of feet: 4 pcs HEATING/COOLING JACKET Internal tempering: full pipe coil INSULATION Insulation jacket: bolted Insulation jacket material: aluminum EQUIPMENT Manhole / dome: in cylinder Outlet: flange DN125 Note: light residues, manhole cover plated Rodpfoyck Nmjx Ahzjbt MATERIAL SPECIFICATION Tempering system material: V2A 1.4301 (AISI304) Feet material: steel AGITATOR Agitator arrangement: mounted laterally on the cylinder

Condition: used, Year of construction: 2006, tank capacity: 750 l, GENERAL INFORMATION Construction type: suspended Year of manufacture: 2006 Remarks: Internal vessel in 'conical/hopper shape'; manhole diameter approx. 410 mm; vessel is bolted onto three load cells on a four-legged frame External diameter: 1,380 mm Total width: 1,560 mm Overall height: 2,050 mm Rbsdeyck Hfjpfx Ahzot Overall length: 1,450 mm Heating/cooling: available Insulation: available Max. permissible operating temperature: 95 °C Max. permissible operating overpressure: 1.5 bar Max. overpressure: 0.05 bar Location: Bremen Nameplate: Volume: 750 liters Double jacket volume: 30.0 liters Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Previous application: food industry VESSEL Max. permissible operating temperature: 100 °C Bottom shape: conical Mounting type: frame HEATING/COOLING JACKET Temperature control on bottom: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: on top head Outlet: DN65 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304)

Condition: used, tank capacity: 9,140 l, GENERAL Equipment: Crane lugs Construction type: Suspended Remarks: Maximum operating pressure heating coil 35 bar; 3 legs, steel; Manhole diameter approx. 490 mm; several external components made of steel, e.g. manhole cover flange and insulation rings around the cylinder Internal diameter: 1,990 mm Total height: 3,750 mm Heating/Cooling: available Max. permitted operating temperature: 242 °C Location: Bremen Nameplate: Vacuum: 1.0 bar Volume: 9,140 liters Double jacket volume: 219.0 liters Cylinder wall thickness: 6.3 mm Product-contact material: V2A 1.4541 (AISI 321) Condition: used Cylindrical height: 2,400 mm Last application: Processing of wool grease VESSEL Max. permitted operating temperature: 200 °C Base type: On support legs HEATING/COOLING JACKET Internal temperature control: Full pipe coil EQUIPMENT Manway/Hatch: In the cylinder Rsdpfxoyck Ddj Ahzebt Outlet: 160 mm Remark: Outlet pipe cut off MATERIAL SPECIFICATION Temperature control system material: Stainless steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.1 mm Top wall thickness: 6.3 mm

Condition: used, tank capacity: 12,280 l, GENERAL Design: rectangular Notes: 2 cooling plates inside the tank; 1 manhole approx. 300 x 400 mm in the front bottom; slight differences in leg length (to be considered during installation) Overall width: 1,500 mm Overall height: 2,970 mm Overall length: 4,450 mm Heating/Cooling: available Location: Bremen Volume: 12,280 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: wine storage TANK Base type: feet Rbedpfsycku Njx Ahzst Number of feet: 7 pcs HEATING/COOLING JACKET Internal temperature control: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 10,468 l, GENERAL Design: rectangular Remarks: 2 cooling plates inside the tank; 1 manhole approximately 340 x 440 mm in the front base; minor dents on the top head; total height indicated is estimated; foot ends were cut off during dismantling and are supplied loose (total current height with cut foot ends approx. 2,650 mm) Overall width: 1,290 mm Overall height: 2,950 mm Overall length: 4,450 mm Heating/Cooling: available Location: Bremen Volume: 10,468 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last previous use: wine storage TANK Support type: feet Number of feet: 7 pcs HEATING/COOLING JACKET Internal temperature control: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 Rodpeycku Aefx Ahzsbt MATERIAL SPECIFICATIONS Material of temperature control system: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 10,460 l, GENERAL Design: rectangular Remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; small dents on the top cover; feet partially reinforced with stainless steel plates; 1 dent in the front bottom (see photos) Total width: 1,280 mm Total height: 2,870 mm Total length: 4,450 mm Heating/cooling: available Location: Bremen Capacity: 10,460 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: wine storage TANK Support: feet Number of feet: 7 pcs HEATING/COOLING JACKET Internal temperature control: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL QUALITY Temperature control system: V2A 1.4301 (AISI304) Rbodpeyckuvefx Ahzot Feet material: stainless steel

Condition: used, tank capacity: 13,650 l, GENERAL INFORMATION Design: rectangular Remarks: 3 cooling plates inside the tank (1 x loose, see photos); 1 manhole approx. 340 x 440 mm in the front bottom; minor dents on the top plate Overall width: 1,450 mm Overall height: 2,780 mm Overall length: 4,400 mm Heating/Cooling: included Location: Bremen Volume: 13,650 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: wine storage Redpfoyckuijx Ahzjbt TANK Mounting type: legs Number of legs: 7 pcs. HEATING/COOLING JACKET Internal temperature control: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Legs material: stainless steel

Condition: used, tank capacity: 11,320 l, GENERAL Design: rectangular Remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; minor dents in the top cover; 1 side wall slightly pushed in Total width: 1,230 mm Total height: 2,830 mm Rbjdpfxsyckucs Ahzjt Total length: 4,400 mm Heating/cooling: available Location: Bremen Volume: 11,320 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: wine storage TANK Support type: feet Number of feet: 7 pcs HEATING/COOLING JACKET Internal temperature control: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Foot material: stainless steel

Condition: used, tank capacity: 6,350 l, GENERAL Equipment: Crane lugs Design: Rectangular Remarks: Thermoplate for heating/cooling on one of the two sidewalls (not present on the other sidewall); 1 manhole approx. 340 x 440 mm in the front base; minor dents on the top plate; various fittings inside the tank Total width: 910 mm Total height: 2,950 mm Total length: 3,650 mm Heating/Cooling: Available Location: Bremen Nameplate: Volume: 6,350 litres Product-contact material: V2A 1.4301 (AISI304) Condition: Used Last application: Winery TANK Foot design: Height-adjustable feet Number of feet: 5 pcs EQUIPMENT Outlet: DN50 DIN 11851 Redpfx Aeycktxehzebt Note: Light residues MATERIAL QUALITY Material tempering system: V2A 1.4301 (AISI304) Foot material: Stainless steel

Condition: used, tank capacity: 21,940 l, GENERAL Equipment: Level indicator (without guarantee), crane lugs Design: vertical Remarks: Tank bottom and 1/3 of the cylinder can be temperature-controlled Speed: 109 rpm Outer diameter: 3,000 mm Inner diameter: 2,830 mm Total height: 5,000 mm Heating/Cooling: available Insulation: available Power: 0.66 kW Agitator: propeller Location: outdoor storage Rbedpfxoyci Tks Ahzot Nameplate: Volume: 21,940 liters Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 3,400 mm Previous application: food TANK Support: height-adjustable feet Number of feet: 3 INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Outlet: available Outlet: 50 mm AGITATOR Voltage: 400 V Agitator mounting: bottom-mounted

Condition: used, tank capacity: 5,000 l, GENERAL Equipment: Crane lugs Design: vertical Remarks: Heating/cooling jacket can also be operated at 3 bar and 143°C (see photo of the nameplate); minor dents in the insulation jacket; sheet metal incisions in the insulation (especially in the lower base) External diameter: 1,830 mm Internal diameter: 1,690 mm Total height: 3,300 mm Heating/cooling: available Insulation: available Max. permissible operating temperature: 100 °C Max. permissible operating pressure: 4.0 bar Agitator: agitator flange Location: Bremen Cylinder temperature control: Thermoplate Nameplate: Volume: 5,000 liters Double jacket volume: 58.0 liters Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 2,100 mm Previous application: food industry TANK Max. permissible operating temperature: 100 °C Support type: feet Number of feet: 3 pcs. HEATING/COOLING JACKET Rbsdpfsyciy Rjx Ahzst Bottom temperature control: Thermoplate INSULATION Insulation jacket: welded Insulation jacket material: stainless steel EQUIPMENT Manway / dome: in top head (DN 500) Outlet: 50 mm Note: slight residues MATERIAL PROPERTIES Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR Agitator arrangement: off-center in top head

Condition: used, tank capacity: 53,000 l, GENERAL Construction: horizontal Redpfsyciyqox Ahzjbt Remarks: 3 reinforcement rings made of Fe, each with 2 feet (Note: tank diameter is lower than the tank feet; consider this during installation); 1 manhole in the front dished end Internal diameter: 3,000 mm Total length: 7,900 mm Heating/cooling: available Location: outdoor storage Cylinder temperature control: rectangular half-pipe coil Name plate: Volume: 53,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical length: 6,750 mm Previous use: brewery TANK Support design: feet Number of feet: 6 pieces EQUIPMENT Outlet: available MATERIAL CHARACTERISTICS Temperature control system material: V2A 1.4301 (AISI304) Feet material: steel

Condition: used, tank capacity: 72,500 l, GENERAL Equipment: Spray head Design: horizontal Remarks: 6 reinforcement rings Fe with 2 feet each (Note: tank diameter lower than tank feet; consider when positioning); manhole in front end Internal diameter: 2,800 mm Total length: 13,100 mm Heating/cooling: available Location: outdoor storage Austria Cylinder temperature control: rectangular half-pipe coil Volume: 72,500 liters Rbedpfx Aoyciykohzst Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical length: 12,000 mm Last application: brewery TANK Support type: feet Number of feet: 12 units MATERIAL SPECIFICATIONS Temperature control system material: V2A 1.4301 (AISI304) Feet material: steel

Condition: used, Year of construction: 2005, tank capacity: 1,085 l, GENERAL Features: crane lugs, control cabinet (without guarantee) Design: vertical Year of manufacture: 2005 Remarks: Welded stainless steel ring on the outside of the vessel (protrudes approx. 100 mm from the outer diameter (insulation)) Outside diameter: 1,130 mm Inside diameter: 990 mm Total height: 2,150 mm Heating/cooling: yes Insulation: yes Power: 1.1 kW Max. permissible operating temperature: 143 °C Max. permissible operating overpressure: 3.5 bar Top head: welded lid with hinged segment Agitator: propeller type Location: Bremen Cylinder temperature control: double jacket Nameplate: Volume: 1,085 liters Double jacket volume: 17.0 liters Product-contact material: V4A 1.4401/04 (AISI 316) Condition: used Cylindrical height: 1,240 mm Previous use: biochemistry VESSEL Max. permissible operating temperature: 95 °C Base design: feet Number of feet: 4 pcs HEATING/COOLING JACKET Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Outlet: 48 mm Note: slight residues/adherences MATERIAL SPECIFICATIONS Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR Voltage: 400 V Interference suppressor: Rodoycixtopfx Ahzobt Agitator arrangement: eccentric on top head Agitator features: speed control via control cabinet

Condition: used, tank capacity: 1,190 l, GENERAL Equipment: Crane lugs Design: Vertical Heating/cooling: Available Insulation: Available Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 4.0 bar Max. overpressure: 4.0 bar Agitator: Propeller Location: Outdoor storage Cylinder tempering: Double jacket Nameplate: Vacuum: 1.0 bar Volume: 1,190 liters Double jacket volume: 105.0 liters Product-contact material: V2A 1.4301 (AISI 304) Condition: Used Last application: Pharmaceutical TANK Max. permissible operating temperature: 150 °C Support type: Height-adjustable feet HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar INSULATION Insulation jacket: Hermetically welded Insulation jacket material: Stainless steel EQUIPMENT Manhole / Dome: On upper head Rjdeycirajpfx Ahzjbt AGITATOR Agitator arrangement: Eccentric on upper head

Condition: used, tank capacity: 1,350 l, GENERAL INFORMATION Design: Suspended Remarks: Various technical documents available; the tanks were suspended at the previous owner’s facility in a ring with load cells, which was embedded in the floor (one ring per tank is included in the delivery; see photos) Speed: 412 rpm External diameter: 1,250 mm Internal diameter: 1,000 mm Overall height: 2,650 mm Heating/Cooling: available Insulation: available Power rating: 0.75 kW Max. permitted operating temperature: 140 °C Max. permitted operating overpressure: 6.0 bar Max. overpressure: 3.0 bar Agitator: Magnetic stirrer Location: Bremen Technical documentation: Drawing Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,350 litres Double jacket volume: 80.0 litres Product-contact material: V4A 1.4435 (AISI 316) Condition: used Cylindrical height: 1,460 mm Last application: pharmaceuticals TANK Max. permitted operating temperature: 130 °C HEATING/COOLING JACKET Max. permitted operating vacuum: 1.0 bar Bottom temperature control: Half-pipe coil INSULATION Insulation material: mineral wool EQUIPMENT Manhole / access cover: in top head Discharge: present Discharge outlet: 50 mm MATERIAL SPECIFICATION Temperature control system material: V2A 1.4541 (AISI 304) Rbsdpfx Ajxxiccehzst AGITATOR 1 Agitator manufacturer: MAVAG AG Voltage: 230/400 V Agitator arrangement: bottom mounted TECHNICAL DATA / DIMENSIONS Top head wall thickness: 4.5 mm

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, used LOOS / Bosch steam boiler system, - consisting of 2x steam boiler with gas burners from Weishaupt, feed water tank, feed water pumps, condensate tank, control cabinets, add-on parts, complete documentation available Data LOOS / Bosch boiler: - Type U-HD 800 - 10 bar operating pressure - 800kg/ h steam - Year of construction 2001 Data Weishaupt burner: - Type G5/ 1-D - Version ZMD-LN - min. 160kw max. 830kw - Year of construction 2001 Transportation can be offered. Rodpfx Ahjqwn Ryezsbt Only serious and serious inquiries will be answered: Name, e-mail address and telephone number.

Condition: excellent (used), Auxiliary heater Buderus 2500 kW. Oil + gas. Housed in 20-foot sea container. Rodpjx U Eyfofx Ahzobt

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 540 kg, smoke pipe connection diameter: 160 mm, temperature: 90 °C, total height: 1,420 mm, total length: 1,240 mm, total width: 1,445 mm, warranty duration: 60 months, Equipment: hot water, Central Heating Boiler Uniwersal Power 24kW Hybrid boiler for pellet, wood, and eco-pea coal! Heating Surface: 10kW = 50 – 90 m2 12kW = 80 – 110 m2 15kW = 90 – 140 m2 19kW = 140 – 180 m2 24kW = 140 – 220 m2 Our 5th class pellet, wood, and eco-pea coal boiler is a unique product that comes with an ECODESIGN Certificate. The Uniwersal Power boiler is a modern yet straightforward design. Unique construction on the market: – Boiler made of 6mm thick boiler steel! – ECODESIGN Certificate – SV2000 side combustion step burner – Large loading hopper, providing up to 7 days of continuous operation! – ARGOS PID PLUS PELLET controller – Auger reverse run – Horizontal channels without troublesome and short-lived ceramic plates – Supports 3 pumps – High boiler efficiency – Wide controller expansion options – Can operate continuously throughout the entire heating season without the need to shut down – Low fuel consumption in summer mode – Long boiler lifespan Uniwersal Power 24kW The boiler complies with the new 5th class, effective from July 1, 2018, PN-EN 303-5:2021-09 and the newly established 2020 ECODESIGN standards for pellet and eco-pea coal! Easy cleaning! ARGOS PID PLUS PELLET Controller! Argos PID Plus PELLET is a controller designed for boilers with automatic fuel feeders. In addition to managing the combustion process (control of the screw feeder and air supply), it also controls: – Central heating circuit (time zones, option to connect a room panel) – Domestic hot water circuit (boiler charging pump, time zones) Rbodpox Up Dzsfx Ahzot – Additional 230V output (e.g., circulation pump or additional heating circuit) – Mixing valve (time zones) PID Algorithm SV2000 Feeder The feeder is an integral part of the central heating boiler with automatic fuel dosing. Fuel is delivered from the storage bin (hopper) to the burner by an auger. Combustion takes place in a specialized, patented fifth-generation combustion chamber. Driving the auger is a gearmotor consisting of a motor and gearbox. The burner ignites and shuts down automatically! Main tasks of the SV2000 burner: – Fuel combustion – Regulation of combustion intensity – Automatic fuel feeding – Safety – Energy efficiency Equipped with a step-type feeder: – No need for an additional pellet insert; the step feeding system ensures fuel separation and safety. – Shutdown procedure ejects and burns all pellets from the lower feeder – Improved air distribution allows faster ignition – Use of two energy-saving gearmotors and a robust feeding system increases reliability; the previous pellet capacity sensor has been eliminated – New combustion chamber shape guarantees increased lifespan of SV2000 feeder components We always purchase parts for our boilers directly from the manufacturer, ensuring we have access to the latest solutions and improvements, positively impacting boiler performance and reliable, trouble-free operation. WHAT IS INCLUDED IN THE COMPLETE BOILER PACKAGE? 1. GZ 1.5″ return stub pipe 2. GZ 1.5″ supply stub pipe 3. Drying and pressure equalization system for the hopper 4. Slot for controller sensor 5. Socket, GW 3/4″ (for e.g., thermometer) 6. Hopper 7. Drive – Gearmotor 8. Socket for faucet GW 3/4″ 9. ARGOS PID PLUS PELLET controller 10. Chimney fitting selected and matched to the customer!

Condition: excellent (used), Heating boiler Loos UT 5200Kw.incl.oil burner Rsdpfx Ahsmn Hpyozjbt

Condition: excellent (used), Used heatable/coolable agitator tank with anchor agitator Type: CILC3000TPRWA Item number: 10865 Last intended use: Food Volume: Approx. 3150L Type: Upright design on four height-adjustable feet Design: Min. 2mm wall thickness Material (wetted parts): 1.4301 stainless steel Surface: Satin finish on the outside, BA (IIId) on the inside Internal weld seams: Ground Operating pressure: Atmospheric Thermoplate operating pressure: Max. 1.8 bar Operating temperature: Max. +95°C Top plate: Central cross member with two hinged lid halves Bottom plate: Conical bottom with central outlet Tank dimensions: Tank diameter: 1600mm Cylinder height: 1500mm Total height: 2700mm Feet height: 580mm Equipment: -Thermoplate (double jacket) for heating/cooling, H=1000mm, around the cylinder. Part of the tank, inlet/outlet connection 3/4" nipple, max. operating pressure 1.8 bar -Thermoplate (double jacket) for heating/cooling on the bottom of the tank, inlet/outlet connection 3/4" nipple, max. operating pressure 1.8 bar -1x hinged lid, central crossbar with 2 hinged lid halves with locking function (can be locked in a 90° open position) -2x metal grates below the hinged lid as anti-soap protection, screwed, removable -Cross braces welded between the feet Rbjdpfxjwfnpqj Ahzot -1x agitator flange connection -1x spare connection DN50 DIN11851 on the top plate with blind cap -Outlet DN50 DIN11851 Handle extends to the front, adapter shaft, guide plate -1x nameplate Agitator: Anchor agitator Max. viscosity: 20,000 mPas Manufacturer: Schwarzer Rührtechnik GmbH Type: SRTFGH/1.5-10 Power: 1.5 kW Speed: 0-11 rpm Operating voltage: 3PH 400 V Material in contact with product: 1.4301 stainless steel -Motor and gearbox manufactured by Getriebebau NORD -Gearbox with food-grade oil filling -Solid agitator shaft with double bearings in the gearbox -Agitator shaft balanced for smooth running across the speed range -Anchor agitator made of 60x60 square tube, welded design -Stainless steel flange with EPDM V-ring seal Agitator control: CEE plug-in switch on the tank with on/off switch, phase inverter, zero-voltage release, and emergency stop, pre-wired Continuous speed control of the agitator motor via a compact, external frequency converter, manufactured by Optidrive Operating voltage: 3PH 400V

Condition: good (used), Used stainless steel container with agitator SKU: 10421 Pieces: 2 Last use: Food Volume: 15 litres Type: Standing on 3 feet Material (media contact): 1.4301 stainless steel Rjded R Rxhjpfx Ahzsbt Execution: Single-walled Bottom: Curved Upper floor: Curved Operating pressure according to type plate: ATM Dimensions of containers: Outer diameter: 280mm Cylindrical height: 230mm Height of feet: 840mm Distance outflow to ground: 480mm Total height: 1620mm Total width: 670mm Materials: Inside: 1.4301 / AISI304 Exterior parts: 1.4301 / AISI304 Facilities: Nameplate: no Outlet: 70mm Discontinued type: Valve Agitator Various connections

Condition: ready for operation (used), Used stainless steel tank with double jacket Final use: food CONTAINER IS CLEANED! Item number: 10247 Volume: approx. 400L Type: Standing on feet Material (wetted parts): 1.4301 / AISI304 Design: Double malt Underbody: dished boiler end Topsoil: Flat bottom with hinged lid Operating pressure according to type plate: ATM Tank dimensions: Container diameter: 930mm cyl. height: 450mm Total height: Ca 1220mm Rsdpfx Ajd A Tt Aehzjbt height of the feet: 480mm materials: Interior: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 facilities: Double jacket around cylinder and underbody Various connections Hinged cover Agitator mounting Type plate