Used Welding Turntable for sale (6,318)

Year of construction: 2013, condition: ready for operation (used), 10 identical welding machines are available. Fuse protection: 32A, welding range: 40-350A, open circuit voltage: 18-43V, switch steps: 20, welding current at 100 percent duty cycle (40°C): 260A, length: 900mm, width: 560mm, height: 950mm, weight: 120kg. Standards: EN 60974-1 IEC 60974-1 international standard for arc welding equipment, protection class: IP23, protection against spray water and solid foreign objects smaller than 12mm, suitable for outdoor use, insulation class: H, cooling method: AF air cooling with fan, welding current range: 40A 16V to 350A 31.5V, open circuit voltage U₀: 18-43V, duty cycle at 350A: 50 percent duty cycle 5 minutes welding 5 minutes pause, at 330A: 60 percent duty cycle 6 minutes welding 4 minutes pause, at 260A: 100 percent duty cycle continuous operation possible, mains supply voltage: 3~400V 50Hz three phase, maximum mains current I₁ max: 25A, effective mains current I₁ eff: 18A. They are in good condition. An on-site inspection is possible. Dodpfoxdc U Ajx Ac Noun

Year of construction: 2018, condition: ready for operation (used), 5 identical welding machines are available. Mains voltage: 400V 50/60Hz, fuse: 25A, power consumption: 22kVA, cos phi: 0.8, setting range: 40-400A, working voltage: 16-34V, open circuit voltage: 19-55V, voltage steps: 2x12. Duty cycle at 40°C: 60 percent at 360A 32V, 100 percent at 250A 26.5V. Protection class: IP23, insulation class: H 180°C, cooling type: F. Weight gas cooled: 153kg, water cooled: 161kg. Length: 1040mm, width: 460mm, height: 935mm. Two coarse steps, 12 fine steps, high performance 4 roll wire feeder 140W, feeding speed: 0.5-24m/min, wire diameter: 0.8-1.6mm, 2 choke outputs for adjustment to the welding task. Control MC 15 as a compact easily exchangeable control box. Functions: wire feed speed constant control, wire creep, burn back time, 2 stroke and 4 stroke, wire inching without current and gas, low noise fan thermostat controlled for gas cooled units, thermal overload protection, central connection socket for welding torch. An on-site inspection is possible. Dsdpfx Asxdda Hjc Njun

Condition: ready for operation (used), A PlymoVent welding fume extraction system is available. Compressed air tank volume: 11l, compressed air quality: class 6, operating pressure: 4bar-5bar, compressed air consumption per pulse: 40nl-50nl. Documentation available. On-site inspection is possible. Djdpfx Acjvgffte Njun

Year of construction: 2006, condition: ready for operation (used), A welding cell including robot and welding machine is available. Table dimensions X/Y: 1800mm/900mm, max. workpiece height: 800mm, switching hours: 5250h, operating hours: 1244h. 1) Robot Fanuc ARC Mate 100iBe, year of manufacture: 2006, payload: 6kg, max. reach: 1373mm, repeat accuracy: +/-0.08mm, weight: approx. 238kg. 2) Welding machine Fronius Magic Wave 4000, year of manufacture: 2006. On-site inspection is possible. Dsdpfxsviv Dlj Ac Neun

Condition: ready for operation (used), Year of construction: 2022, Professional version, laser power: 1500W, integrated pilot laser, wavelength (nm): 1075 ± 5, programmable slots: 9, W-LAN. The condition is as good as new. Dedpfxerwzrus Ac Noun

Year of construction: 2018, condition: ready for operation (used), Number of heating cartridges: 24, heating cartridge average and length: 12.5mm/200mm, power: 630W, 230V, including resistance thermometer type PT100, heating time to 350°: 40min. Dimensions X/Y/Z: 1900mm/2100mm/3040mm, weight: approx. 2200kg. Documentation available. Dodpfxjtp Nace Ac Njun

Condition: ready for operation (used), Year of construction: 2020, Longitudinal sealing: continuous, photo cells: horizontal/vertical, working height range: 760mm-960mm, max. transport speed: 30m/min, film core diameter: 76mm, max. film roll diameter: 350mm, max. film roll width: 650mm, sealing stamp width: 300mm, product width range: 50mm-410mm, product height range: 1mm-250mm, min. product length: 50mm, film thickness range: 7µm-80µm, max. output rate: 85cycles/min, materials: POF/PE/PVC/PLA/bio films. Machine dimensions X/Y/Z: approx. 2200mm/1700mm/1800mm, weight: approx. 800kg. Documentation available. An on-site inspection is possible. Duodpfx Acoxuvnqs Non

Year of construction: 2018, condition: ready for operation (used), 3 identical welding machines are available. Very little used. Standard: EN 60974-1, three phase 3~400V 50Hz. Rated values at X 40°C: 5A 10V, 350A 24V 40 percent, 320A 22.8V 60 percent, 280A 21.2V 100 percent for one operating mode, another operating range 5A 20V with 320A 32.8V 40 percent, 290A 31.6V 60 percent and 260A 30.4V 100 percent, U1 = 400V, protection class IP23. It is an inverter controlled TIG MMA welding power source with max. 350A, digital control and memory functions, pulse function adjustable from approx. 0.5Hz to 2kHz, HF or lift ignition, adjustable parameters such as gas pre flow and post flow, slope up and down, balance and various waveforms sinus square etc., PFC technology for high efficiency and operation on generators, remote control or foot pedal connection, thermal monitoring and fault diagnosis with error codes, optional water cooling unit KG 10. An on-site inspection is possible. Djdpfxoxdda Te Ac Neun

Condition: ready for operation (used), Year of construction: 2013, A welding system for welding metal pipes is available. Number of heads longitudinal seam/round seam: 3/3, 4th head: possible. Inner workpiece diameter min./max.: 600mm/4500mm, max. workpiece weight: 50t, max. wire diameter: 4mm. Conveyor belt driven/rotating: 25t/25t. Head capacity: 2x AC 1000 and 1x DC 1200, including automatic brushing system. Documentation available. On-site inspection is possible. Dujdpfx Ajvr Edmec Njn

Condition: ready for operation (used), Year of construction: 2020, An automatic Lorch welding machine including vacuum pump and traverse is available. Current: 230V, power: 100W, min. material thickness: 5mm, vertical/horizontal pulling force: 150N/350N, vertical/horizontal speed: 1100mm/min/1200mm/min, machine dimensions X/Y/Z: approx. 450mm/670mm/370mm, weight: approx. 25kg. Documentation available. On-site inspection is possible. Djdpfov Rfq Dsx Ac Neun

Year of construction: 2014, condition: ready for operation (used), An ultrasonic welding system with nine Telsonic Ultrasonic, cabin, nine generators and documentation is available. Control system: Siemens SIMATIC PANEL. On-site inspection is possible. Duodpfouy T Nqox Ac Non

Year of construction: 2013, condition: ready for operation (used), A laser system with 1 loading station and two stations each is available. Welding fixtures: 4, laser power: 3.3kW, beam source: TruDisk 3302 disk laser, workpiece dimensions X/Y/Z: 300mm/100mm/100mm, material thickness: 1.5mm, welding speed: 5600mm/min, welding optics: Trumpf BEO D70, operating hours: approx. 70000h. Documentation available. On-site inspection is possible. Duedpfx Acjv Rfrbs Nsn

Year of construction: 2004, condition: ready for operation (used), A completely overhauled automatic welding station Cloos from the year 2025 including two rotary tables is available. Robot type: Romat 350, welding source: GL 300 IHPR, control system: Rotrol II, welding process: TIG. Rotary table load capacity: 2x250kg, rotary table type: WPEK-DP-KP-2.5kN, axes: 6+2+2. Documentation vorhanden. An on-site inspection is possible. Dedpoxyk Szjfx Ac Njun

Year of construction: 2018, condition: ready for operation (used), A complete welding system with a robot and peripheral equipment is available. Welding stations: 2, robot travel path: 11000mm, max. workpiece diameter left/right: 2200mm, max. workpiece length left: 4000mm, workpiece length range right: 1000mm-5000mm, welding process: TIG, materials: aluminum/stainless steel, shielding gas: argon, overall system dimensions X/Y/Z: approx. 15350mm/5700mm/4000mm, control unit: Qirox QC2 Advanced. Including suction technology. Documentation available. An on-site inspection is possible. Djdpfxoxnz Upo Ac Neun

Year of construction: 2020, condition: ready for operation (used), A Panasonic welding robot cell with two rotary tables is available. Fixture contour rotary table/per side: 3800mm/1200mm, working height: 900mm, robot: TM-2000, positioner: PanaDice, max. load capacity: 2x1000kg, welding cell: PA-ET-2PD-XL, torch equipment: ATU011060. Overall system dimensions X/Y/Z: approx. 7050mm/4100mm/2500mm, weight: approx. 5300kg, control: Siemens PLC S7-1200, HMI: Siemens KTP 900 Basic. Documentation vorhanden. An on-site inspection is possible. Dusdpox Auppofx Ac Njn

Condition: ready for operation (used), An Akon welding cell including Kuka robot and 2x Dinse welding sources is available. 1) Welding robot: Kuka KR 6 R900, payload: 6kg, reach: 900mm, control: KR C4 Compact, flange load: 25kg, total weight: approx. 170kg. 2) Automatic welding cell Akon Robotics with turntable and Kuka control system. 3) Welding power source Dinse Dix PI 900. The EP motor for the 4th axis was replaced in 2023. Documentation available. On-site inspection is possible. Djdpsv H Dfxjfx Ac Neun

Year of construction: 2004, condition: ready for operation (used), A fully overhauled automatic welding station Cloos from the year 2025 is available. Robot type: Romat 320, welding power source: GLC 353 MC3 R, control system: Rotrol II fibre optic, welding process: MIG. Load capacity: 15kg, robot axes: 6, reach: 3200mm, repeatability: +/-0.1mm, power: 25kVA, total weight: approx. 600kg. Documentation available. An on-site inspection is possible. Dedpoxyk Suefx Ac Noun

Year of construction: 2013, condition: ready for operation (used), A self-built powder welding machine with a power source Kennametal and an MTA cooler for applying Stellite to valves is available. 1) Cooler MTA TAE EVO 10M, year of construction: 2013, cooling capacity: approx. 3kW, refrigerant: R407, filling quantity: 0.8kg, max. operating pressure: 28bar, flow rate: approx. 0.59m³/h. Machine dimensions X/Y/Z: approx. 600mm/600mm/800mm, weight: approx. 100kg. 2) Power source Kennametal Stellite PTA Junior Star, year of construction: 2013, open circuit voltage: 75V, welding current range: 10A/10V-250A/38V, protection class I. Documentation available. An on-site inspection is possible. Dsdpfsxwn Nlsx Ac Njun

Condition: ready for operation (used), Year of construction: 2013, A welding system for welding metal pipes is available. Number of heads longitudinal seam/round seam: 3/3, workpiece inner diameter min./max.: 600mm/4500mm, max. workpiece length: 12700mm, max. workpiece weight: 50t, max. wire diameter: 4mm. Conveyor belt driven/rotating: 25t/25t. Head capacity: 2x AC 1000 and 1x DC 1200, including automatic brushing system. Documentation available. On-site inspection is possible. Dedpfjvr Edtjx Ac Neun

Year of construction: 2021, condition: ready for operation (used), 20 identical welding machines are available. Type: cool41 U31, standard: IEC 60974-1, -2, -10 C.L.A, mains voltage: 400V, frequency: 50/60Hz, protection class: IP23, power consumption P min: 0.9kW, cooling capacity P max: 0.35MPa (3.5bar), max. current consumption: 2.5A, length: 539mm, width: 210mm, height: 415mm, weight: 22kg. Control: Comfort 2.0 with intuitive operation via click wheel, pulse spot normal mode continuously adjustable (especially for TIG welding), pulse pause ratio (balance) adjustable for example from 10-90%, Hz and kHz pulses up to approx. 15kHz, ActivArc technology dynamic arc control to ensure constant performance despite distance fluctuations and to prevent electrode sticking, improved root and penetration quality, spotArc Spotmatic functions for spot welding and tacking, 2-stroke and 4-stroke mode depending on torch trigger operation, manual metal arc welding often with MMA pulse automatic also integrated, gas pre-flow and post-flow times adjustable, upslope and downslope times also controllable, torch modes via torch trigger such as reduced secondary current, memory and job storage recurring welding tasks can be saved depending on version approx. 8-100 jobs, energy efficiency high efficiency, standby function available. Remote control and interfaces remote adjusters and functional torches can be connected, optional LAN WiFi gateway ewm Xnet, PC interfaces for parameter setting and monitoring. Very little used. An on-site inspection is possible. Djdpfjxdc Upjx Ac Nsun

Year of construction: 2020, condition: ready for operation (used), A railing welding device (railing welding jig) Förster is available. Component weight: 300kg, turning radius: 360°, axle height: 1000mm, max. incline: 60°, railing height: 600mm-1200mm, max. profile dimensions X/Y: 80mm/40mm, max. profile diameter: 80mm, machine dimensions X/Y: 5000mm/1200mm. Documentation available. On-site inspection is possible. Duodpfx Acswr Dwdj Nsn

Year of construction: 2002, condition: ready for operation (used), A medium-frequency spot welding machine Dalex-Werke is available. Throat depth: 350mm, electrode stroke: 90mm, electrode holder diameter: 30mm, electrode taper: MK2, rated power at 20% duty cycle: 180kVA, max. welding power: 200kVA, primary voltage: 400V, rated frequency: 1000Hz, electrode force: 20daN–600daN. Weight: approx. 575kg, control: HWS 2102. Documentation available. An on-site inspection is possible. Dsdjw H Sc Ajpfx Ac Neun

Condition: ready for operation (used), A total of 18 welding machines are available. 1-9) Welding machine ESS MIG-MAG 311, functional: 3, defective: 2, unclear: 4. Including wire feeder DVK-13 and partly hose package. 10) Welding machine Migatronic MTE 320. Including wire feeder CTU 3000. The hose package is defective. 11) Welding machine Merkle W420 AC/DC TIG Insquare, welding process: TIG, material: aluminum. 12) Welding machine EWM MIG 450 puls. Including wire feeder. 13) Welding machine WIG L-TEC TIG 404 AC/DC. 14) Welding machine Cloos GLC 450 N. Including wire feeder and hose package. 15) Welding machine Oerlikon CPGL 454. Including wire feeder VCW 454 and hose package. 16) Welding machine Stel HI-MIG 500P. Including hose package. 17) Plasma cutting machine Plasma 125. Including hose package. 18) Welding machine Merkle MIG/MAG M 325 DW. Including wire feeder DV30. Documentation available. An on-site inspection is possible. Dodpfxsxhntxs Ac Njun

Year of construction: 2012, condition: ready for operation (used), A Dalex welding press/projection welding machine including Sortimat (ATS) feeding unit is available. Rated power at 50% duty cycle: 100kVA, max. welding power: 455kVA, open-circuit voltage: 8.88V, max. short-circuit current: 67kA, cooling water flow rate: 10l/min, electrode force min./max.: 120daN/720daN, single-stroke cylinder: 100mm, machine throat depth: 250mm, stop range: 148mm-400mm, belt diameter: 260mm. Weight: approx. 850kg, control system: MPS 200 multi R1. Including sorting and feeding unit, flow monitor, adjustment device and return stroke monitoring. Documentation available. An on-site inspection is possible. Dsdpfx Acexr Nwaj Neun

Year of construction: 2021, condition: ready for operation (used), Robot travel path: 5000mm, arm length: 2500mm, lift: 1000mm, spin radius: 2200mm, L-manipulator load capacity: 2000kg, lift velocity: 0,85m/min, swing speed: 1,7/min, turn speed: 6/min. Roboter type: IGM RTE 497-S in hanging position, control: full digital PC-Robotcontrol, Type RCE, software: WIN 10 & Linux based System + igm Robotsoftware K6, welding process: 135 (GMAW), single-wire, Ø1,2mm, welding power source: digital Invert Welding Power Source TPS 500i (500A at 40% duty cycle), robot periphery: rotating boom for floor installation with 2,5m boom length, number of working stations: 1, working station: 3-axis L-Manipulator with lifting device with 2t nominal load capacity, security Technology: Pistol-Security-Shut-down in wrist axis, emergency Stop on Handtablet, on Manipulators and Control Panel, three-coloured warning light for the operating Status partition, security Door. machine is complete, no defects known, documentation complete, was maintained regularly. An on-site inspection is possible. Dedowc A Rdspfx Ac Njun