Used Welding Force for sale (13,326)

Condition: new, Year of construction: 2025, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language. In our offer we have a lot of welding machines we developed ourselves and they are all digitally and software based MIG MAG, MIG PULS SYNERGIC welding machines, also for robot welding with touch screen monitor, TIG ac dc with touch screen monitor, digital plasma cutting machines, electronics for controling the high pressure water jet pump, sand dispenser for water jet cutting, voltage THC with touch screen monitor... We are also very involved in innovation and development, please take a look at our other products, if you are a manufacturer, and are interested in discussing further, we are also selling know-how. Lhodpomk S Slsfx Affsr

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Equipment: type plate available, Year of manufacture 1994, modernized by the machine manufacturer KUKA in 2012. The system is equipped with a turning unit, bead punching unit, and a tube feed unit for unloading the welded components. We can adapt this system according to customer requirements. A complete retrofit is also possible. Ledpjx I Efbofx Affehr

Condition: used, Year of construction: 2013, type of input current: three-phase, filter area: 53.1 m², suction capacity: 3,000 m³/h, Welding fume extraction, dust extraction, self-cleaning, pneumatic, negative pressure filter by Donaldson Torit. Suitable for welding, grinding, sandblasting, and all types of dry dusts. Cartridge filter elements. The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high device efficiency. Brand: Donaldson Torit DCE Model: DFO 3-3 Fan power: 5.5 kW Lhjdpfx Aex Hfiwsffor Capacity: 3000 m3/h Filtration surface: 53.1 m2 Inlet diameter – 2 x 150 mm Year of manufacture – 2013 Dimensions: Width – 1.65 m x 0.90 m Height – 3.25 m Stock no.: 1088

Condition: used, Year of construction: 1980, outer diameter: 38 mm, pipe diameter (max.): 38 mm, PRODUCT (PROFILE, TUBE) .. external diameter min.: 11 mm .. external diameter max.: 38 mm Lodex Hd Thspfx Affjhr .. wall thickness min.: 0.8 mm .. wall thickness max.: 2 mm LINE CHARACTERISTICS .. welding process: HF inductive .. sawing process: travelling .. speed max.: 120 m/min ELECTRICAL SPECIFICATIONS .. mains power supply: 440 kVA For sale is a fully serviced and excellently maintained tube welding line . The line was previously used for the production of USM Haller furniture tubes, but it is designed for a wide range of tube diameters, making it highly versatile for different manufacturing requirements. Welding is carried out with an induction HF system from EFD Induction, built in 2018, ensuring a modern and efficient welding process. Total line length: approx. 100 m Operation: handled by 7 operators Condition: well-maintained, fully operational Scope of delivery: complete package An excellent opportunity for companies looking for a reliable and high-performance tube welding line.

Condition: ready for operation (used), load capacity: 9,450 kg, 0°→135° kantel capaciteit afstandsbediening met regelbare snelheid draaiende tafel : 360° 4 klemmen op de tafel Diameter tafel: 2000 mm Ledpfsx Hbkkex Affshr MANIPULATOR: yes Table dimentions: Diameter: 9450 kg - 1720 kg

Condition: good (used), Year of construction: 1993, MIG/MAG welding machine, MIG/MAG welding machine -Max. welding power: 350 A Ledpfeb Uw Nrex Affjhr -2-roller drive -Air-cooled -incl. ground cable -with removable wire feeder -Gas valve -Hose package: 2.8 m -Dimensions: 1100/640/H1090 mm -Weight: 190 kg

Year of construction: 2019, condition: new, VM-2400/4-8 BB-Basic wire mesh machine is ideal solution for rebar shops and factory of reinforcing mesh with not large capacity. In addition to the low price, the advantageof this machine is inexpensive and easy maintenance, as well as the possibility of designing a machine according to your technical characteristics. TECHNICAL DATA: • Line wire diameter: Ø 4 ÷ 8 mm • Cross wire diameter: Ø 4 ÷ 8 mm • Line wire pitch: 150, 200 mm • Cross wire pitch: 150, 200 mm (fixed) • No. of electrodes: 16 • No. of cylinders: 8 • Mesh panel width: 2400 mm • Mesh panel length (min-max): 2 ÷ 6 m • Stroke (welding)/minutes: 35-40 cross wire/min • Feeding of line wires: bars Lhodod Tfnpspfx Affor • Feeding of cross wires: bars

Year of construction: 2021, condition: like new (used), For sale is an as good as new orbital welding machine from the company ORBITAL Weldingtools with many accessories.Year of manufacture 2021. Ljdpshp U S Sjfx Affohr

Condition: like new (used), Year of construction: 2019, operating hours: 20 h, Equipment: documentation/manual, Welding Kit: 1. Welding robot by KUKA type typ CYBERTECH - KR 20 R-1810 KRC4 prod. 2019 Lhodpfellyfiox Affsr 2. Positioner 2-axis max. 500kg 3. FRONIUS welding machine type TPS 400i - new prod. 2023

Condition: used, Year of construction: 2011, Available from October 2025 1st Urban AKS 6405 Lodpfx Afoulfxajfjhr - Year of construction 2011 - Min. welding dimension: 323 x 382 mm - Max. Sealing dimension: 2300 x 2520 mm - Applied profile systems: Veka Softline 70, Topline 70, Swingline 70, Softline 76, Softline 82, Topline NL, Softline NL, Alphaline 90, Topline Plus - Weld bead limitation 2 mm (no stainless steel blades) - Operating system: Windows XP 2nd Urban SV 530 - Year of manufacture 2005 - Incl. Urban WT turning station + cooling station - Operating system: DOS (complete PC replaced in 2023) - Various components replaced (DARC V05-10-20 supply module in 2018) - Cutter for 2.5 mm groove (no V-groove)

Condition: new, Year of construction: 2022, functionality: fully functional, input voltage: 400 V, ambient temperature (min.): 5 °C, ambient temperature (max.): 50 °C, ROBOTIC WELDING STATION ROBOARC_E WITH KUKA ROBOT ON POLE-ARM AND FRONIUS TPS 320I MT SOURCE - KUKA KR8 R2100 Arc HW robot. The robot uses a motion control system that compensates for the path of the torch, accelerates and decelerates, sets the travel speed and other coefficients. The robot can control multiple axes, divided into different groups. The groups of operations are independent of one another but can work simultaneously. - Fronius TPS320i CMT welding source Fronius TPS/i is one of the most modern welding sources, and with its huge power output of up to 320A, it meets the highest welding requirements for unalloyed steels, low-alloy steels, high-alloy steels and aluminum. Intelligent equipment, modular design and multiple options for system expansion provide the necessary flexibility and performance. Lodpfx Aot Dxwmeffehr - ROBOT CONTROLLER, PROGRAMMING PANEL (SMARTPAD) The SmartPAD is a hand-held programmer equipped with all the operating functions and indicators that are necessary to operate and program industrial robots. - ILLUMINATED STATION SIGNALING COLUMNS The signal column is located on the fence of the station. The column corresponding to Station A has 3 signal lights, i.e.: green, red and orange, as well as a beacon sounder, at station B it has 3 signal lamps, i.e.: green, red and orange. - CONTROL CASSETTES WITH ILLUMINATED BUTTONS The illuminated buttons of each station of the station inform about the activity of the of the operation being performed to which the illuminated button corresponds.

Condition: good (used), Stud welding machine, stud welding compact system, stud welding machine, stud welding -maximum current: A -without a pistol -Housing: robust -for threaded bolts: max. 10 mm -Number: 3x stud welding machines available -Price: per piece -Dimensions: 420/220/H290 mm -Weight: 14 kg Lhjdjb H Rk Tspfx Affer

Condition: like new (used), functionality: fully functional, The following item is for sale: Lodpfx Asrdyqmeffohr - Our offer number: 2/129 - Resistance welding control welding inverter - Manufacturer: Matuschek - Type: Spatz H 6000 - Type number: H60A012 - Serial number: H60072262 - Power: 33KVA 3-400-500V 50/60 Hz - Dimensions: WxHxD 380x460x220 mm - Weight : 29 Kg - optical condition according to photos - New / as new condition with traces of storage - functional Notes: The goods offered here usually come from company liquidations and bankruptcies. Due to missing type plates, it is not always possible to provide exact item data. The item pictures are original photos that show the actual condition of the item. If several identical items are offered, only one of the items will be photographed. There may be slight variations in the condition of the individual items. If an item is opened or repaired/rebuilt by the buyer, any warranty claim will be void. This also applies if repairs and modifications are carried out by third parties without prior agreement. Jwt9nu Company names and trademarks used are the property of their owners. They serve exclusively to identify and describe the goods available.

Condition: new, Year of construction: 2024, operating hours: 5 h, machine/vehicle number: A24013210011001, As good as new filter system, only used for demo purposes on a laser cutting system Machine is available immediately EcoCube basic version 5.5 kW Lhodpfxsv E U Uzs Affjr Stat. Item No.: 84213925 Weight: approx. 491.00 kg Incl. spark pre-separator FVS 4000 (original packaging) No spark trap, but conversion for nozzle NW315 Incl. high-temperature hose 4 meters Incl. bend NW 315 90°

Year of construction: 2021, condition: like new (used), Complete welding and polishing line in like-new condition Ledpfx Aex Irtfjffohr

Condition: good (used), Year of construction: 2009, functionality: fully functional, For sale is our Reis welding robot in good condition. The welding robot comes complete with enclosure and is immediately available. (Technical data can be found in the photos.) Type: Reis RV 20-16 Control and operating unit: PHG 10-2 The system is located at our plant in Hungary / 2699 Szügy and is being sold ex works. (Dismantling can be arranged in consultation with the buyer.) We would be pleased to welcome you for an inspection and demonstration of the system (by appointment). The system is being sold with the non-perforated welding table only! (see last photo) The perforated version is not included in the sale. Ledpswra S Dofx Affohr We will be on company holiday from 19.12.2025 to 06.01.2026. From 07.01.2026, we will be available for you again.

Condition: ready for operation (used), Year of construction: 2020, This 6-axis Kawasaki BA006L-A welding robot was manufactured in 2020. It features a high-performance Fronius power source and a two-axis positioner, housed in a safety-compliant enclosure for operator protection and process stability. The robot offers a maximum payload of 6 kg and a reach of 2036 mm, ideal for precise and automated MIG/MAG welding tasks. If you are looking to get high quality welding capabilities consider the Kawasaki BA006L-A machine we have for sale. Contact us for more information. Lhodpfsx E Ea Tsx Affer Application Types Welding

Condition: good (used), TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Max. welding power: 350 A -Accessories: Welding cable with electrode clamp, ground cable Lodofivizopfx Affshr -Quantity: 1 welding machine available -Price: per piece -Dimensions: 390/550/H530 mm -Weight: 56 kg

Condition: good (used), Year of construction: 2007, functionality: fully functional, overall weight: 925 kg, input voltage: 400 V, total width: 1,420 mm, total length: 1,850 mm, total height: 4,200 mm, Brand: Donaldson Model: 2DFP6-SPRK Year of manufacture: 2007 Version: Cartridge filter Lhodpox Ihdtjfx Affsr Application: Metalworking, grinding, milling, CNC machines Capacity: approx. 2,000 – 4,000 m³/h (depending on configuration) Filter cleaning: Automatic compressed air cleaning Extra: Equipped with spark arrestor (SPRK) Condition: Used, from industrial environment

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Force former Eckold-MKF-250-250 Article number: 01-05-001 Manufacturer: Eckold Very good general condition Machine workshop tested Delivery time: Immediate prior sale reserved Year of construction: approx. 1995 Lhodpfjvccb Rex Affjr L x W x H: approx. 1200x800x1800mm Weight: approx. 400kg Accessories: Hydraulic Other accessories on request Price and other technical data on request

Condition: ready for operation (used), self aligning set of welding rotators one driven unit one non-driven unit max load capacity: 300 ton max rolling capacity: 450 ton speed range: 60 1200 mm/min min diameter of workpiece: 1000 mm max diameter of workpiece: 7800 mm spare wheels included Lhodpfx Asx Enhyjffsr Max weight on both supports: 450 ton Number of wheels: 24 wheels Dia x width wheels: dia 580 x 140 mm Coating material on wheels: steel

Condition: used, Lot of 5 units WIG welding machines ESS model Thyrotig - Thyroplasmma 250 (DC) WIG welding machines in need of repair Year of manufacture: 1991 to 1994 Output: 250 Amp. = 60% duty cycle, 195 Amp. = 100% duty cycle Current type: DC Mains connection: 400 Volt, 50 Hz, 32 Amp plug - High-voltage ignition - 2-stroke and 4-stroke operation modes - Water-cooled Lhjdpfxew Hhbio Affer - Some parts missing - Delivered without torch sets/hoses, scope of delivery as pictured Space requirements (L x W x H): 1200 x 570 x 920 mm Weight per welding machine: 255 kg Total weight for all 5 machines: 1,275 kg Three machines are operational. Two were kept in storage as parts donors. The units are no longer tested and are being sold as in need of repair.

Condition: ready for operation (used), Year of construction: 2014, This Yaskawa DX100 was manufactured in 2014. It's a welding robot like new, with minimal operating hours. Features include a rotary table for dual workpiece processing (1000 × 1500 mm) and a wire feeder for overlay welding. It's equipped with a high-performance TIG welding system. Technical support is available via ROBOTECO S.p.A. Contact us for more information about this machine. Application Types Welding Lhjdex E Efijpfx Affsr

Condition: good (used), Inert gas welding machine with pulse function, pulse-arc welding system, MIG/MAG pulse welding system -with: 3 hose packages (1x aluminum, 1x stainless steel, 1x steel) -Max. welding power: 330 A -Equipment: remote control connection, with removable wire feed, including ground cable, gas fitting -Wire feed: 4-roller drive Ljdpfed I U Dwex Affshr -Cooling: Water-cooled -Dimensions: 655/900/H1490 mm -Weight: 160 kg

Condition: good (used), Heat exchanger for inert gas welding machine, inert gas device, cooler -Manufacturer: CLOOS, heat exchanger from inert gas welding machine GLC 353 MC3 -Blower: ebm papst type M4Q0465-DA01-S8 -Dimensions: 330/160/H330 mm Lhodpfx Afewubqtefjr -Weight: 4.2 kg