Used Weima Shredder for sale (89)

Condition: excellent (used), Year of construction: 2018, operating hours: 1,192 h, functionality: fully functional, rotor diameter: 260 mm, rotor width: 800 mm, power: 30 kW (40.79 HP), filling opening width: 800 mm, filling opening length: 1,450 mm, working width: 800 mm, Technical data wood and plastic shredder: Manufacturer WEIMA Maschinenbau GmbH Type WLK 800 Year of construction 2018 Operating hours 1,192 hours Drive power 30 kW Speed 90 rpm Rated current 70 A Slow-blow fuse 80 A Hydraulic pressure for horizontal slide 160 bar, load-dependent or pulsed control selectable Rotor type profiled V-rotor Rotor diameter 260 mm Rotor length 800 mm Rotor speed 80 - 125 rpm Number of cutting crowns, concave, 2-row, 42 pieces Cutting crown size 40 x 40 mm Grain size 15 - 80 mm Feed opening 800 x 1450 mm Cutting chamber dimensions 720 x 700 mm Hopper capacity 0.8 m³ Machine dimensions 2,590 x 1,745 x 2,180 mm (l x w x h) PLC control Siemens SIMATIC S7-1200 Podpfewrxkljx Ah Hjgg Screen basket with 30 mm hole size, can be folded downwards Shredder transport weight 2.8 tonnes Machine equipment: Segmented floor 2-sided Free-cutting hopper Electromechanical drive with WEIMA WAP gearbox Hydromechanical starting clutch V-rotor (2-row) Adjustable counter blade for regulating the cutting gap Reversible counter blade Remote bearing for easy maintenance Condition of the shredder: The shredder was only used sporadically for wood and plastic shredding and is in good, ready-to-use condition. The machine is available at short notice. Scope of delivery: 1 Weimar WLK 800 shredder with control cabinet Comments: The documentation (Manual, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Pjdpfx Ahjvymdws Hsgg Technical data: Hopper opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Rotor working width: 600 mm Rotor diameter: 260 mm Drive power: 15 kW Rotor speed: 90 rpm Number of knives: 14 pcs + 2 pcs Type and size of knives: concave / 40 x 40 mm, reversible knives concave / 30 x 30 mm, scraper knives Screen perforation: 15/20 mm Paint finish: RAL 5010 / 7016 Connection value: 400 V +/- 5 % / 50 Hz Included: Control cabinet (Rittal) incl. 5 m cable Electrical control system (Moeller / Siemens) Star-delta start, rubber vibration dampers E-rotor with machined knife pockets Gearbox limit switch 1st knife row Hold-down device on slide for long and large parts Special scraper knives to prevent lateral jamming Weight: 1100 kg Availability: short-term Storage location: Flörsheim

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Pgodpfxot Hagne Ah Heg Connected load: 400 V +/- 5 % / 50 Hz including: Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Switch cabinet on hopper and electrical control system Briquette length monitoring Automatic end position of all cylinders Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Availability: short term Storage location: Solingen

Condition: good (used), Rotor approx. 250 mm Hydraulic slider Feed opening approx. 600 x 800 mm Psdpfx Aewc R Rleh Hjgg Rotor length approx. 600 mm Motor 18.5 kW External dimensions approx. 1750 x 1250 x 1600 mm Technical specifications upon request

Condition: good (used), Year of construction: 2020, Rotor 260 mm Feed opening approx. 800 x 1200 mm Rotor length approx. 800 mm Motor 18.5 kW Technical data upon request Required space approx. 2050 x 1550 mm Pgedpfx Aewzaizsh Hog All information without guarantee

Condition: ready for operation (used), Technical characteristics 2000 mm wide slow-speed shredder, with hydraulic pusher and pivoting grate support Main motor power : 75 Kw Up to 1480 RPM Hydraulic pusher motor power : 7.5 kW Number of squared knives : 58 Rotor speed : up to 110 RPM Rotor Ø 368 mm Diameters of outlet screen Ø : 20/40 mm Inclined hopper : height 1535 mm Pgodpfjtpryrex Ah Hjg Upper part of hopper : 3280 x 2750 mm Lower part of hopper : 1800 x 2000 mm Power and Motors Voltage: 400 V Pluging: Three-phased Overall dimensions Weight: 6500 Kg

Condition: ready for operation (used), Technical characteristics Power and Motors Voltage: 400 V Pgodpfx Ahjukzakj Hsg Pluging: Three-phased Overall dimensions Lenght: 1660 mm Width: 1100 mm Height: 1470 mm Weight: 1200 Kg

Condition: ready for operation (used), Weima WLK 12 Specifications Motor Power: 100 hp (75 kW) Feed Opening (Infeed): approximately 6.2′ × 5.9′ (1,920 mm × 1,800 mm) Rotor Diameter: ~14.4″ (368 mm) Pgodpfxew U Txuj Ah Hog Rotor Width / Length: ~47.2″ (1,200 mm)

Condition: excellent (used), Rębak Weima WL6, silnik 18,5KW, długość rotora 800mm, szuflada hydrauliczna, autorewers. Pedpfx Ahow Aaums Hogg

Condition: new, Year of construction: 2025, Year of manufacture: 2025/2 Podpfx Ahorq Eu Rj Hogg Engine power: 18.5 kW Speed: 90 1/min Weight: 1.3 tons Rotor lengths: 600 mm Rotor diameter: 252 mm Rotor knives: 28 pcs Funnel: 600 x 1050 mm

Condition: new, Year of construction: 2025, Year of manufacture: 2025/2 Engine power: 18.5 kW Speed: 90 1/min Weight: 1.3 tons Pgjdpfxovw Tw Es Ah Hsg Rotor lengths: 600 mm Rotor diameter: 252 mm Rotor knives: 28 pcs Funnel: 600 x 1050 mm with an extra-ribbed sliding plate

Year of construction: 1995, condition: good (used), 600 mm Rotor width 7,5 kw Motor 650 U/ min Pgsdpfefxg Dlex Ah Hsg

Condition: reconditioned (used), power: 30 kW (40.79 HP), hopper volume: 800 l, working width: 800 mm, Slow-speed shredder, 800 x 1000 mm hopper, 30 kW motor, hydraulic pusher, reversible knives Pgsdpfx Aowzg Taeh Hog

Condition: ready for operation (used), Feature Specification Rotor Size φ ≈ 370 mm × 1500 mm Rotor Speed 80–125 rpm Knife Count Up to 123 (V‑rotor) Power 75–90 kW (electromech); up to 110 kW Infeed Opening 1500 × 1890 mm Psdpfx Aow A I Tdjh Hogg Weight ~6400 kg Output Particle Size 15–100 mm (exchangeable screen) Drive & Bearings WAP gearbox, sealed bearings Control Siemens PLC Discharge Belt / screw / suction available Applications Plastics, packaging, wood, fibre, etc.

Condition: ready for operation (used), 🔧 Key Specifications Cutting System: Four-shaft configuration with two cutting shafts and two clearing shafts. Cutting Disc Diameter: Approximately 280 mm (11 inches). Cutting Unit Dimensions: Working width of 1,000 mm and length of 700 mm. Hopper Opening: Approximately 1,400 mm x 1,600 mm. Motor Power: Typically equipped with two 18.5 kW motors. Operating Speed: Low-speed operation at around 25 rpm for high torque and reduced noise levels. Weight: Approximately 2,500 kg Pgjdewnx Uiepfx Ah Heg

Condition: used, Year of construction: 2007, SINGLE SHAFT SHREDDER WEIMA MODEL WLK15 Pgsdpfeyfwz Ijx Ah Hog MAIN MOTOR 90KW ROTOR KNIVES SIZE 50X50 (NEW KNIVES) ROTOR LENGTH 1500MM ROTOR DIAMETER 370MM THE MACHINE IS 100% FUNCTIONAL READY TO WORK

Condition: used, Year of construction: 2007, SINGLE SHAFT SHREDDER WEIMA MODEL WLK15 MAIN MOTOR 90KW ROTOR KNIVES SIZE 50X50 (NEW KNIVES) Pgjdpfxeyfwxgs Ah Hog ROTOR LENGTH 1500MM ROTOR DIAMETER 370MM THE MACHINE IS 100% FUNCTIONAL READY TO WORK

Condition: used, Year of construction: 1998, Slow-speed model: with hydraulic moving floor Filling opening (mm): 1200 x 1200 Hopper volume: 2 cubic meters Throughput depending on material: 2 - 4 hopper fills per hour Motor (kW): 37 Profile rotor: 8 x rotating knives (reversible breaker plates) Knives: easily and quickly reversible/replacable by screws Knife shaft diameter / rotor diameter (mm): 368 Rotor length (mm): 1200 Rotor speed (rpm): 90 Knives: 64 Extraction port diameter (mm): 200 Air speed at suction port (m/sec): 28 Pgodpfxox Srq Sj Ah Hsg Chipper weight (kg): 3300 Chipper length (mm): 2500 Chipper width (mm): 1900 Chipper height (mm): 1750

Condition: used, Year of construction: 2017, Weima HWN-2-1000 chipper for shredding wood and similar materials such as plastics or cardboard. The machine features a robust design, a large feed hopper, and two powerful rotors for continuous material feeding. Optional new blades available at an additional cost. rotor diameter: approx. 354 mm rotor length: 1.000 mm Number of knives: 2 x 72 drive power: 2 x 18.5 kW Dimensions: 2.4 x 2 x 2 m sieve size: 10 mm Pgjdoxvzzxjpfx Ah Hsg

Condition: used, total length: 1,650 mm, total height: 3,380 mm, total width: 2,600 mm, - Documentation available: No - CE certificate present: No Pgjdpfx Ahowf El Ao Heg - Main motor power [kW]: 11 - Number of shafts [pcs.]: 1 - Hydraulic slide present: Yes - Opening width [mm]: 1000 - Opening length [mm]: 1200 - Transport dimensions: 1650mm x 2600mm x 3380mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1991, total length: 1,660 mm, total height: 1,470 mm, total width: 1,100 mm, Empty weight: 1.300 kg - Year: 1991 - Documentation available: No - CE certificate present: No - Serial number: 500-1014 - Main motor power [kW]: 18.5 - Rotor width [mm]: 600 Pjdpfjwu Uy Isx Ah Hjgg - Opening width [mm]: 600 - Opening length [mm]: 800 - Sieve perforation [mm]: 15 - Number of rotating knives [pcs.]: 1 - Transport dimensions: 1660mm x 1100mm x 1470mm (l x w x h) - Transport weight [kg]: 1300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2018, Single Shaft Shredder Weima Model: WLK2000 Main Motor: 110kW Rotor Diameter: 370mm Rotor Length: 2000mm Weight approx.: 9000kg Rotor knives size: 40x40x23mm Pedpexdclbefx Ah Hjgg

Condition: ready for operation (used), Year of construction: 2005, operating hours: 11,192 h, functionality: fully functional, overall weight: 35,000 kg, rotor diameter: 800 mm, number of blades: 70, type of input current: AC, WEIMA FineCut 2500-800 shredder Machine in good working order, used in the production of alternative fuel. Currently out of use, ready for loading. Pgedjwh Rcfopfx Ah Hog

Condition: used, Year of construction: 1999, functionality: fully functional, fuel type: electric, - German-made - Year of manufacture: 1999 TECHNICAL SPECIFICATIONS: - feed opening: 600 x 800 mm Pgsdpfsw H Rn Esx Ah Hsg - rotor diameter: 175 mm - rotor length: 600 mm - total power: 18.5 kW - number of knives: 14 pcs - reversible cutting knives: 30 mm x 30 mm - screen: Ø 15 and 12 mm - AUTOREVERSE - HYDRAULIC RAM - pressing ram height: 180 mm - rotor speed: 80–120 rpm - extraction nozzle diameter: Ø 200 mm - dimensions (L/W/H): 200 x 120 x 160 cm - weight: 1200 kg

Condition: excellent (used), CATALOG NUMBER 7595 Technical data: - Loading hopper inlet: 1400x1400mm - Outlet for shredded wood: diameter 160mm - Rotor working width: 600mm - Main motor: 18.5kW - Pump motor: 0.75kW - Number of knives: 14 pcs - Knife dimension: 40x40mm - V-Rotor - Screen: 10mm - Hydraulic pressure drawer - Electric auto-reverse - Dimensions (L/W/H): 1810x1210x2120mm - Weight: 1220kg ADVANTAGES Pedpeydc Nujfx Ah Hogg – Made in Germany – V-Rotor – Technical documentation (DTR) – Hydraulic pressure drawer – Auto-reverse – Used chipper in very good condition Net price: 39,900 PLN Net price: 9,500 EUR (based on exchange rate 4.2 EUR) (Prices may change subject to significant fluctuations)