Used Waterjet for sale (103)

Condition: ready for operation (used), Year of construction: 2014, General Data Measurements width 3600 mm Measurements depth 5500 mm Measurements height 1600 mm Main Drive Number of axis 3 Movement X-Axis Movement 3050 mm Y-Axis Movement 2050 mm Z-Axis Movement 250 mm Table Table load 450 kg/m² Additional Equipment Nwedpfexd Ia Dsx Af Eon Table Protected with Plexiglas Panels and Lift Doors Equipped with Water Deflectors and Baffles in Tank This 3-axis Imes-Icore CUT matic WJ 3020 was manufactured in 2014. It features a universal waterjet gantry cutting system with a fully protected axis guidance system. The machine includes a stainless steel basin and table, motor-driven shuttle table, and highly dynamic linear drives in X and Y. The cutting area is enclosed with Plexiglas panels and lift doors. If you are looking to get high-quality waterjet cutting capabilities, consider the Imes-Icore CUT matic WJ 3020 machine we have for sale. Contact us for more information. Application Types Cutting

Condition: used, Year of construction: 2007, High-pressure pump with 3 pistons for waterjet machines Njdpfx Ajxix Dkef Eown Control cabinet for the high-pressure pump 5-axis cutting head with complete assembly

Condition: excellent (used), Year of construction: 2016, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 4030, travel distance X-axis: 3,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 250 mm, input voltage: 400 V, power: 37 kW (50.31 HP), load hours: 12,000 h, Equipment: safety light barrier, Complete, well-maintained Bystronic waterjet cutting machine. 2 cutting heads, 37kW pump, ASAS sludge treatment system. The machine is in daily operation and can be tested until week 42. Many spare parts included, extra pump (some spare parts missing). Bysoft 7. Nwedsxiq S Topfx Af Ejn

Condition: used, Year of construction: 2007, operating hours: 3,498 h, functionality: fully functional, machine/vehicle number: A511910, travel distance Z-axis: 180 mm, table length: 1,750 mm, table width: 760 mm, FOR SALE BY TENDER Nedexgu Aqepfx Af Eswn

Condition: new, Year of construction: 2023, The waterjet cutting system from the latest OMAX high-end series in bridge design represents what is technologically feasible in combination with reliability, durability and maximum load capacity. Low-noise and low-emission operation in conjunction with extremely simple PC-supported operation for precision at the push of a button predestine this series for use under the harshest operating conditions in industry and trade, from single-shift operation to 24/7. - closed measuring system - digital drives - brushless servo motors - precision linear guides surface-hardened Nwodpfxsmzbv Dj Af Esn - portal (bridge) driven on both sides - maintenance-free IntelliTRAX drive - energy-efficient EnduroMAX ultra-high pressure pump - practical water level control as standard equipment - ergonomic control panel on rollers - IntelliMAX Premium control software - high-precision 5-axis kinematics TiltaJET High-end solution for the most accurate abrasive waterjet cutting in the industry. Price on request

Condition: new, functionality: fully functional, overall weight: 12,000 kg, total length: 8,100 mm, total width: 6,080 mm, total height: 5,500 mm, feed rate X-axis: 45 m/min, feed rate Y-axis: 45 m/min, feed rate Z-axis: 15 m/min, sheet thickness (max.): 140 mm, table length: 3,650 mm, table width: 2,150 mm, SPECIAL PRICE Nodstynfgspfx Af Ejwn Breton Combi is the cnc bridge saw with waterjet for cutting marble, granite, quartz, ceramic, Lapitec slabs to create kitchen top, vanity tops and claddings Price from €uro 250.000

Condition: used, Year of construction: 2019, operating hours: 7,294 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 300 mm, Used Perndorfer WSS4020 waterjet system - Cutting format up to 4m x 2m - Z-axis stroke 300mm; depending on cutting head, cutting height from 180mm to 220mm - Cutting tank with sludge removal - Grate bed with zero-point stop - Control cabinet with integrated 5-axis CNC control CNC300ET - Abrasive cutting head +/- 60 degrees - 2D height sensing - Abrasive dosing with plexiglass buffer hopper - Abrasive container 200l - Light curtain - Wje-CAM from ProCom on machine control - Big bag frame - Settling tank Nwodpfx Ajxdvi Tef Esn - Servo-Jet 4000 high-pressure pump - Laser pointer for positioning

Condition: new, x-travel: 3000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! advantages No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum stole Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤ 1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! Nodshqnl Tepfx Af Eswn So you can work longer than 1 hour.

Condition: used, Year of construction: 2009, operating hours: 18,640 h, functionality: fully functional, machine/vehicle number: M15305015, table length: 3,000 mm, table width: 1,500 mm, For sale: MAXIEM 1530 Single owner from new Machine operational after service Operating hours: 18,640 h Regularly serviced, in continuous use (testing possible) Nwodpfxsxcm Svj Af Ejn Net price: PLN 139,000.00 Gross price: PLN 170,970.00 negotiable Price includes water treatment unit, machine dismantling, and loading We have a service technician who can install the machine and provide training (costs borne by the buyer)

Condition: used, Year of construction: 2004, operating hours: 4,812 h, functionality: fully functional, travel distance Z-axis: 250 mm, table length: 4,050 mm, table width: 2,050 mm, pressure: 4,130 bar, table height: 950 mm, Equipment: safety light barrier, FOR SALE BY TENDER Nwedpfxsxguugj Af Ejn

Condition: new, Year of construction: 2023, OMAX ProtoMAX® waterjet cutting system The smallest industrial waterjet cutting system in the world! Due to its compactness and versatility, the ProtoMAX® waterjet cutting system is perfectly suited for small batch and prototype production as well as teaching applications. It can also be used to complement larger waterjet cutting systems. The small footprint allows it to be used in smaller spaces and mounting on casters makes it easy to relocate. - Very compact complete system - Integrated high-pressure pump 2,000 bar - Abrasive system Nwjdpfxsm Dtgvs Af Ejn - Laptop with CAD/CAM system - Closed measuring system - Practical clamping system - Power connection 230 V - Connected load max. 4 kW - Incl. starter kit Personal Abrasive Waterjet. Price on request

Condition: refurbished (used), functionality: fully functional, workpiece length (max.): 3,400 mm, workpiece width (max.): 1,800 mm, workpiece height (max.): 200 mm, table width: 2,300 mm, table height: 1,800 mm, table length: 4,500 mm, table load: 500 kg, input voltage: 400 V, power: 30 kW (40.79 HP), input frequency: 500 Hz, 5-Axis Waterjet Cutting Center equipped with: - integrated working tank - 4.200 bar full electric e-drive™ - 19” numerical control - abrasive pressurized tank Njdpfxsxbgvfj Af Ejwn - cutting head - watercad-cam software accessories included - 5 axis ±55° interpolating system and touchwave ce-ramic™ - loading and unloading system - light laser barriers Included expenses: - Installation of the machine(s) - Machine full-load start-up - Practical training to BUYER’S staff on the machine functions

Condition: used, Year of construction: 2009, operating hours: 3,303 h, functionality: fully functional, pressure: 4,000 bar, overall weight: 990 kg, Uhde HPS 4011 High pressure pump 15 HP /HP (Pictures are condition) Nwodpfouixdcox Af Ejn

Condition: new, x-travel: 4000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble Nwjdpsd Ab Uusfx Af Esn tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour.

Condition: ready for operation (used), Year of construction: 1999, functionality: limited functionality, The machine is operational and working. To make accurate cuts, however, a service must be carried out. The machine can be inspected under process conditions. A high pressure pump which has been serviced regularly is included. We sell as is where is Thank you Nwedpfx Afottaywo Een

Condition: excellent (used), Year of construction: 2018, operating hours: 3,200 h, functionality: fully functional, repeat accuracy: 0.01 mm, travel distance X-axis: 3,002 mm, travel distance Y-axis: 1,502 mm, travel distance Z-axis: 300 mm, positioning accuracy: 0.02 mm, workpiece weight (max.): 4,500 kg, type of input current: three-phase, input voltage: 400 V, sheet thickness aluminum (max.): 300 mm, operating pressure: 4,000 bar, cutting speed: 8,000 mm/min, power of the servo motor: 2,000 W, table load: 4,500 kg, compressed air connection: 6 bar, product height (max.): 300 mm, power: 37 kW (50.31 HP), Equipment: safety light barrier, Machine: STM 1530 PremiumCut 3D 12° angle compensation Pump: BFT ECOTRON® 40.37 (37 kW, 4000 bar) Great condition, fully functional, purchased new in October 2018. Machine is located in EU, Zagreb, Croatia, possible cutting test at our place. Only 3200 pump operating hours, automatic pressure control, automatic abrasive control, cutting angle compensation, possible upgrade with turning machine and drilling unit for piercing sensitive materials, durable machine frame (aluminium alloy + stainless steel), equipped with high quality parts. 1. Waterjet cutting system STM 1530 PremiumCut 3D 12° angle compensation Robust CNC milled absolutely rust-proof construction in aluminium and stainless steel High-precision robust rack and pinion drive with helically toothed racks Premium guide X & Y axis with Bosch Rexroth™ with high-precision ball-bearing carriage and stainless steel balls Threefold dirt scraper package Working area accessible from 3 sides for simplified loading and unloading Underwater cutting is possible CNC milled workpiece holder with heavy-duty frame for parts with weights of up to 1,000 kg/m² The scope of supply contains the required lubricants and special tools for servicing and maintenance 1.1 CNC operating range X axis: ..... 1,502 mm Y axis: ..... 3,002 mm (bridge) Z axis clearance: ..... 300 mm A axis: ..... 12 degrees B axis: ..... +/- ∞ 1.2 Precision and feed Positioning precision: ..... ± 0.02 mm (per metre at 20°C) Repeatable precision: ..... ± 0.01 mm (per metre at 20°C) Max. feed: ..... 60 m/min A axis feed: ..... 360 deg/s B axis feed: ..... 360 deg/s 1.3 Dimensions & weight Length: ..... approx. 3,750 mm (incl. high-pressure tubing) Width: ..... approx. 4,700 mm Height: ..... approx. 3,400 mm (incl. high-pressure tubing) Weight: ..... 1,500 kg (without water) 2. High pressure pump ECOTRON® 40.37 420 MPa max. design pressure 400 MPa max. permissible operating pressure 380 MPa max. continuous operating pressure 3.8 l/min max. flow rate 37 kW driving power 2.1 Technical details Drive hydraulics with axial piston pump and hydraulic pressure/flow rate control Gear pump for separate cooler/filter circuit Pressure intensifier with drive cylinder and high pressure cylinder 2.49 litre pulsation damper according to Pressure Equipment Directive 97/23/EC Connection for external emergency stop circuit Electrical and electronic components fitted in control cabinet Hydraulic and high pressure components mounted on a common base frame Compact design, all tubing fitted, all pipework fitted and wired 2.2 Options Included Nwsdpfovla U Tex Af Esn Automatic pressure adjustment from 50 - 400 MPa Cooling via oil/water heat exchanger Pressure relief valve with pneumatic control Check valve on the feed water inlet Double filter element for pre-filtration of the feed water Sound insulation casing Special tools for fitting the high pressure seals incl. torque wrench Water stop check valve Included: machine, high pressure pump, control unit (PC in electronic box), abrasive, spare parts

Year of construction: 2016, condition: ready for operation (used), Cutting range X/Y: 3000mm/6000mm, max. oxyfuel cutting: 300mm, max. cut of unalloyed/alloyed steel: 64mm/50mm, max. cut of waterjet cutting: 100mm. Including Hypertherm HyPrecision high pressure pump. The combination of water and plasma cutting can lead to dimensional deviations. Documentation available. On-site inspection is possible. Nwsdpfxou H H E Ss Af Eon

Condition: new, Year of construction: 2025, functionality: fully functional, repeat accuracy: 0.025 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 310 mm, positioning accuracy: 0.025 mm, type of input current: three-phase, input voltage: 380 V, sheet thickness aluminum (max.): 300 mm, operating speed: 15,000 mm/s, pressure: 4,150 bar, warranty duration: 24 months, cutting speed: 15,000 mm/min, travel speed (max.): 20,000 mm/min, table load: 1,200 kg, year of last overhaul: 2025, product height (max.): 300 mm, Brand new Waterjet Cutting Machine 💧 Waterjet Cutting Machine X-JET 2040 – PROFESSIONAL – Made in Poland 🇵🇱 🔧 Polish manufacturing – top quality and precision! The modern, fully professional X-JET waterjet cutter is designed for the most demanding customers. Thanks to the latest technologies and a rigid frame design, the machine guarantees excellent cutting quality, high precision, and long-term durability. 🔹 Key Features: Working area (3-axis): 2000 x 4000 mm X/Y traverse speed: up to 20,000 mm/min Positioning accuracy: ±0.025 mm Repeatability: ±0.025 mm Max. table load: 1200 kg/m² Sealed linear motion units + servo drives Centralized electronic lubrication system Advanced CNC control + IGEMS CAD/CAM 2D/3D Optional 💥 5X Cutting Head: Taper angle compensation and bevel cutting up to 45° Drive: Harmonic Drive + Spinea TS Pneumatic on/off valve with diamond nozzle Automatic cutting height adjustment Z-axis and tool calibration 🧠 Intelligent Systems: 12 MP camera Nsdpfxov Tmxue Af Eewn Automatic tool angle adjustment system Precision 5x cut calibration system 💦 High-pressure Pump: Max. working pressure: 4150 bar (60,000 psi) Constant pressure: 3792 bar (55,000 psi) Flow rate: up to 3.8 l/min Nozzle diameter: 0.10–0.35 mm High-quality intensifier and proportional valve Quiet operation and touchscreen control ⚙️ Additional Equipment: Automatic abrasive removal system – WAWE 170 Professional abrasive feeder – DUNA 1100 Water treatment system with reverse osmosis Efficient sludge extractor – 170 l/min 📍 Made in Poland – local product with global capabilities. 💬 Feel free to contact us! We are happy to send you the full technical documentation and prepare a tailored offer. Custom machine dimensions and any configuration available on request. *(Images are for reference only; the offer refers to a 1.5x3m, 3-axis machine.)

Condition: like new (used), Year of construction: 2019, operating hours: 3,500 h, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 150 mm, pressure: 3,450 bar, For sale: MAXIEM 2040 (2019) – Complete and overhauled waterjet cutting machine Now you have the chance to acquire a MAXIEM 2040 model year 2019, in very good condition – freshly serviced, overhauled, repainted and ready for production. The machine is equipped with: A-Jet (5-axis cutting head) – for beveling, angle cutting and cone compensation Rapid Water Level Control – Raise and lower water level Premium software – includes lifetime free updates and unlimited licenses Pump: 40Hp Pump time: approx. 3500 hours Nwjdpewn El Ujfx Af Een This is a reliable, well-maintained machine with large capacity (cutting area approx. 4 x 2 meters), perfect for those looking for high precision, flexibility and production safety. Delivery and installation can be discussed if necessary. The machine is available for viewing – please contact us for more information or booking.

Condition: as good as new (ex-display), Year of construction: 2023, Short & sweet Base axis (X) : 1.3-2 mm Cantilever (Y) : 1.3-4 mm Accuracy : 0.06 mm Technical data Linear axis accuracy : ± 0.1 mm/m Maximum travel speed : 10 m/min Acceleration : 0.02 g Repeat accuracy : ± 0.06 mm Circularity : ± 0.1 mm Z-axis stroke : 180 mm Base axis (X) : 1.3 m, 3 m, 4 m Extension arm (Y) : 1.3 m, 2 m Njdpfx Aehw Nfqef Eswn Equipment and accessories Maintenance packages UltraPierce tapping aid1 Splash guard1 FlowTexturing (FTT) Abrasive de-sludging system ecoFlow FlowNest* FlowXpert* Laser pointer Clamping and tensioning system Clean water conversion kit * Required for FlowTexturing

Condition: used, Year of construction: 2009, x-travel: 4000y-travel: 2000z-travel: 600messurements (LxWxH): 6.400 x 3.200 x 3.100weight approx.: 10.500 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery Nodpfxowiatij Af Ejwn What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour. Extras: Including extra spare parts worth approx. 25.000¤ (see pictures)

Condition: used, Year of construction: 2005, operating hours: 13,727 h, functionality: fully functional, machine/vehicle number: 3.8/60, positioning accuracy: 0.05 mm, pressure: 4,130 bar, operating pressure: 4,130 bar, cutting speed: 12,000 mm/min, overall weight: 2,000 kg, CNC Opal Waterjet Cutter – 4130 bar Water Cutting System | PTV-JET 37 kW High-pressure pump with accessories for precise high-pressure waterjet cutting Model: Opal Waterjet Year of manufacture: 2005 Isbq N Eewt Ah Rj E Rdjau Total operating hours: 13,727 h Included equipment: - High-pressure pump PTV-JET 37 kW (working pressure: 4130 bar) - Oil cooler - Basic high-pressure fittings - High-pressure gauge - High-pressure valves: manual and pneumatic - Abrasive dispenser - Abrasive pressure transport system - CNC operator panel for machine control - Double cutting head with diamond orifice Offer does not include: - Worktable - Work tank Technical specifications: Nedpswt Ah Rjfx Af Ejwn - Working pressure: 4130 bar - Pump motor power: 37 kW - Maximum water flow: 3.79 l/min - Working width: 1000 – 4500 mm - Working length: 1000 – 10,000 mm - Maximum cutting speed: 12,000 mm/min - Positioning accuracy: ±0.05 mm - Station dimensions: approx. 3 m x 2 m - Net weight: approx. 2000 kg Applications and advantages: - Material cutting: • All types of steels and alloys • Temperature-sensitive materials (plastics, composites) • Multilayer and hard-to-machine materials • Natural materials (marble, granite), glass, ceramics - No thermal effect on the processed material - Precise CNC control of cutting and pump operation - Environmentally friendly technology – no emission of harmful substances - Possibility of integration with existing infrastructure (table, head) Additional information: - Machine taken out of production, assembled and ready for shipment - Full technical documentation available - Location: Tarnowskie Góry, Poland - Possibility of presenting the machine upon prior arrangement

Condition: ready for operation (used), Year of construction: 2013, operating hours: 7,100 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 178 mm, table length: 3,000 mm, table width: 2,000 mm, rapid traverse X-axis: 12,700 m/min, rapid traverse Y-axis: 12,700 m/min, rapid traverse Z-axis: 12,700 m/min, For sale: FLOW MACH3 3020b waterjet cutting machine in excellent technical condition. The machine has been professionally operated and regularly serviced – a detailed service log, meticulously kept by the operator, is available. Technical specifications: - Year of manufacture: 2013 - Commissioning date: end of 2014 - Total operating hours: 7,100 h - Working area: 3,000 × 2,000 mm - High pressure pump: Flow Hyplex Prime 30HP 4140 Bar Nodpfx Afew Np Ibe Ejwn - Condition: fully serviced, ready for immediate operation Test cuts available for interested buyers Included equipment: - Sludge removal system with a separate sludge cart - Abrasive feeder - Special tool for dismantling pump cylinders (FLOW hydraulic wrench) - Multiple spare parts The machine is fully operational, has low operating hours, and is ready for immediate use. An ideal choice for companies seeking a reliable waterjet cutting system with a large working area and a complete set of accessories.

Condition: new, Year of construction: 2019, functionality: fully functional, machine/vehicle number: 8100332, repeat accuracy: 0.076 mm, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 25 mm, workpiece weight (max.): 245 kg, type of input current: AC, input voltage: 230 V, pressure: 2,000 bar, Do you need a precise and versatile cutting machine that doesn't take up an entire workshop floor? Then the OMAX ProtoMAX is the solution. It combines industrial quality with a compact format - perfect for workshops, schools, product development, prototyping and small series production. With water and abrasive, you can cut almost any material - from aluminum, stainless steel and titanium to carbon fiber, plastic, glass and stone. All with high precision, without heat effects or deformation. 🔹 Cutting area: 304 x 304 mm 🔹 Max material thickness: up to 25 mm 🔹 Working pressure: 2,068 bar 🔹 Power: 230 V, 1-phase (standard socket!) 🔹 Ready to run - plug & play Nwodpowl Ipkjfx Af Eon ProtoMAX comes complete with IntelliMAX software, where you can draw, import and cut directly from the same interface. Easy to use, powerful enough for advanced jobs. Do you want to show that your workshop is serious - even on a small area? Then OMAX ProtoMAX is an obvious choice.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 4,020 mm, travel distance Y-axis: 2,020 mm, travel distance Z-axis: 600 mm, controller model: NUM AXIUM POWER, swivel angle A-axis (min.): -46 °, swivel angle A-axis (max.): 46 °, swivel angle C-axis (max.): 3,600 °, Machine including comprehensive accessories TECHNICAL DETAILS X-axis travel: 4020 mm Y-axis travel: 2020 mm Z-axis travel: 600 mm Support surface X, Y: 4,400 x 2,400 mm Axis angle A, B: ± 46° Rotation axis C: ± 3,600° Repeatability: ± 0.1 mm Positioning speed: 10 m/min Max. machining temperature range: +10°C to +40°C High-pressure pump Design pressure: 420 MPa Operating pressure: max. 400 MPa Continuous operating pressure: max. 380 MPa Flow rate: max. 3.8 l/min Drive power: 37 kW Control & electronics Control: NUM AXIUM POWER Drive system: NUM MDLU 3 Rated motor power: 2 kW Control unit: Rittal PC cabinet with air conditioning unit Control system: Integrated CNC/PLC Measurement system: High-resolution SinCos encoder Software Nwedpowbvgiefx Af Een System software: CAD/CAM including 32-bit Windows software Import formats: HPGL, DXF Functions: Automatic approach strategies, jet correction, material database, cutting control, pressure and abrasive control Operating parameters Max. waterjet operating pressure: 4,000 bar MACHINE DETAILS Dimensions (L x W x H): 6,400 x 3,200 x 3,100 mm Machine weight: approx. 10,500 kg Connections Pneumatic connection: min. 6.5 bar Water connection: 2–5 bar Connection values: 400 V AC, 16 A Control voltage: 24 V DC EQUIPMENT - Manual handheld control unit - Double safety light barriers - Abrasive cutting set - Abrasive dosing system with reservoir - Abrasive pressure feed system - Approx. 3 t of cutting sand - Various nozzles, seals, wear and replacement parts